Air Nail Puller Nail Remover Pneumatic Denailer Tool for Recycled Wood Fence Pallet (Ideal for soft or medium-hard woods)

After redoing an old deck with ring shank nails, this thing has paid for its self over and over again. It makes quick work after demoing out the old deck of removing all the nails left behind. Quick and very effective. Would highly recommend to other contractors who may find them selves with a lot of nails to pull. Won’t pull flush nail heads which is the only down side but easy enough to pop the head up with a cats paw and then come back with this and remove the nail the rest of the way.

Works great. Came ready to use, just needed some oil. Very powerful action. Great value for how well it works. Not heavy but seems well made. The rubber grip is nice.

I purchase the nail remover to help disassemble pallets which, because of the twisted shank nails that were hammered into mostly hardwoods, were a royal PIA to disassemble. It was when I had to resort to a 2 1/2' pry bar for the worst nails that I realized I was working too hard.I first bought the nail "shooter" which pushed nails back through from the sharp tip and THAT tool was simply amazing. However, when I only had access to the *head* of the nail it was no good. I then got this tool and here's what I found:(1) You will need to have pryed out the nail at least ½" (preferably more) in order to get this tool's "claw" into position and have a chance at success.(2) Crank up your psi to the tool to the max recommended - 120PSI. Any less and your chances of removing the really stuck nails goes way down.(3) Because the upward ramming against the nail head is what is needed, if you don't have at least that ½" of space, it just won't work. SO, you may need to pry the nails a little more if the tool isn't having any success.(4) Smooth shank nails should be a breeze assuming, of course, a minimum of ½" gap (preferably more). That said, longer nails in harder wood will always be more of a challenge(5), the tool will leave indents in the wood as it "shoots" the nail up and out. Be aware of this if you want to preserve the surface of finer woods.(6) The tool is amazing, truly, if you remove a lot of nails. I was able to complete in 45 minutes what first took me 4 hours and a lot work and pain.SO, it is worth it? I am going to be making crafts with old pallet wood so I anticipate using the tool frequently. For me, the answer is yes. If I were to use it infrequently, the $150-ish price I paid would be a little steep.

Got this to help with removing nails from a 50+ year old barn. It took a couple of the already loose nails out after a couple tries but didn’t budge the majority of the nails. Ended up returning.

Taking up thousands of screws from a doubled up subfloor and a bunch more from the studs all around my house where plaster wall was taken down. This thing packs a punch. I've been using it at 100psi and it has been ripping these out with ease. For ones that are loose, it launches them off the ceiling, so definitely wear the safety glasses it comes with.This thing seems like a hidden gem. I had never heard of them and it seems to be the only one I could find online. Super please and would 100% buy again.

I bought this to pull nails on an old metal roof. I can tel you that it does not work for that. The claw is too thick and can’t get under nails. But does work great when the nails are slightly raised. And by it works I mean it’ll chuck the nail into the next state if you’re not careful.

Update 04/24/2026Well, the honeymoon is over.I've used this tool on hundred and hundreds of nails.Most of the time it works, but it lacks a little power. I've hit many, many nails where they would not budge at all.This tool seems to work on inertia more than anything else, meaning that the piston needs to be moving quite a bit, gather some speed and pull the nail (hopefully). If the nail head is barely out (3/4" or less), then the tool doesn't have enough inertia to move anything...I still 'like it', most of time it works, saves A LOT of time, but when it doesn't, it's a bit frustrating....I'll be shopping for a better more powerful one, if such tool exists.----On nails that are really really stuck, the tool will fail and then the hooks do not fully retract.Just press the trigger and they'll reset back in place.I only had issues with really, really stuck nails. I just used a pry bar to get them unstuck by a few millimeters and then used the nail remover to pull them out.I've extracted dozens of nails so far, and overall, I love love love this tool.Pulls out the nails with lots of force and violence. :)I'm using a small pancake compressor, 2 gallons, with 100PSI. No issue.

Good material.I wish it came with a plastic case at least for 140$ i bought items for 50$ and they had it.if it jams pls unplug air line it has a lot of power it will break your finger.

I was amazed at how well it worked. If the nails are really old it sometimes pulls the nail head off. I pull apart alot of things to recycle and this has pulled out a ton of nails! I am sooooo happy I bought this. I recommend this to everyone as this has really saved my shoulder!

使い様では長い釘も抜けます。

ottimomolto robusto!

Macht genau das was es soll

Nicht für alle Nägel geeignet, aber beim Fachwerk die ganzen wirklich fest sitzenden Nägel ziehen hat super funktioniert, vorher pro Nagel ca 5 Minutes gefummelt und gekämpft. Jetzt Nagelzieher dran, kurz tippen und fertig. Unbedingt Visier tragen und Handschuhe weil die Nägel herausfliegen, keine Schäden am Holz wenn man darauf achtet das die Spitze des Gerätes voll aufliegt