Mini Keg Co2 Regulator 0-60 PSI Portable Corny Keg Regulator | No Leakage, 16g Co2 Cartridge Compatible, Ball Lock Quick Disconnect, fits Corny Keg Mini Keg Growler for Brewing Carbonation

Fit my mini keg and worked great.

Works great, but do not use 24 gram CO2 cartridges, only 16 gram. I use it for forced carbonation and serving hard cider in 3 gal kegs. Works great and fits in my spare fridge nicely. First one failed after a year because (I'm very sure) I used 24g to force carbonate and 16g to store and serve. Switched to only 16g now. Great little units for the price!

Works great. It seems a bit fragile to me, but has worked flawlessly for 10 gal of beer. I’m just very careful. No leaks after connecting 6 CO2 mini bottles.

The construction on this item is exceptional. It comes with all the needed attractions and attachments. The valve assembly regulator is well-made. It can meter the pressure down to five psi which is what I used to deliver beer out of a Corny keg. In the future, it is a back up CO2 source that I will have on all of our kegerators in the future.

I used this with a 5-gallon Corny/Cornelius keg that I had filled with commercial beer for a birthday party where alcohol discretion was required. After filling, I purged the keg of oxygen with CO2 and pressurized it to about 20 PSI overnight. The next day, when it was time to serve, I connected this mini regulator, vented the keg down to around 8 PSI, then slowly increased pressure until the needle just passed 8 PSI before backing it off slightly. (I found 8–10 PSI to be the sweet spot to minimize foam.)The regulator performed flawlessly throughout the entire event. We dispensed about 4.5 gallons of beer using only three or four 16g food-safe CO2 canisters, also purchased on Amazon.While there’s some initial setup involved, once dialed in, I found the regulator reliable and convenient. It saved me the hassle of lugging around a full-size CO2 tank and kept things nice and discrete.To proactively prevent any leaks, I removed all fittings and wrapped them in thread-sealing tape- highly recommended for peace of mind.

Fit perfect , well built and for a great price

This works great to repressurize my mini keg. No complaints.

First impression was great! I delayed buying one of these for years, and when I purchased this and first used it, I was amazed. I used it on a 2.5 gallon Cornelius keg. No leaks and I could regulate the pressure, enabling quality pours. Yet, I wondered how the pressure gauge was not being blown away from the pressure of the 16 g CO2 cartridge. Conventional regulators use a pair of pressure gauges. A high pressure for the compressed gas tank output pressure and a second lower pressure gauge with the regulator to control pressure to your keg. Well, after sitting for about 6 months, I again down packaged some beer from a commercial quarter barrel into the 2.5 gal Cornelius and inserted a new CO2 bullet. Wham!!! As soon as I opened the regulator, the pressure pegged the gauge. The system is not leaking away CO2, but I now have to guess how much pressure is in the keg.I’m not the first person to report this issue. Perhaps a improved replacement is in order.