SPIDERCASE for Samsung Galaxy S22 Ultra Case Waterproof, 12FT MIlitary

I purchased this case for my Samsung Galaxy S22 Ultra, and I really like it. I've only replaced it once in 4 years. The purple and clear design looks nice without taking away from the look of the phone. The case feels sturdy and gives the phone good all-around protection without being overly bulky. I added my own kickstand. The sides have ridges and makes for easy gripping.I also like having the built-in screen protector because it gives me extra peace of mind without needing to purchase one separately. The buttons are still easy to press, and the case fits the phone securely. Overall, it’s a nice protective case that looks good and does its job.

I first have to start with the fact that I don't always read the instruction mainly because it's so small. I applied the case and I had the same problems as most others with the fingerprint scan. I was ready to request a refund on day one. After I read through some of the question and answers I got great tips and a few laughs. So my fingerprint scan wasn't working either and I felt like I was going to break my finger trying to get it to work, so I placed the case under the light and I saw little specks of lint on the scanner. I also didn't know what to do with the little circles prior to reading the q&a section. So I used small amout of glass cleaner and the microfiber wipe made sure the case was dry then I applied the little circle over the fingerprint scan cutout on the inside of the case. After placing my phone back in the case I tested the fingerprint scan and oh my gosh that thing was so quick and smooth I couldn't believe it. I feel that this is the best case for my s22ultra it's very durable and I like that I can control the volume by opening and closing the charging port lol. I was lost for a whole day not being able to access password in Samsung Pass which requires a fingerprint. And I must say I purchased another case similar to this one that is very thick and even though it read my fingerprint I still felt like I was going to break my fingers trying to unlock it at times this case is less expensive than the previous one and I love it.

Update: 1 year... still going strong after many drops.The case is made of good quality and easy to install. It is bulky, but I think that's with every case that covers the phone entirely. It's four stars for me because of the sound quality and the circle on the cover for the fingerprint. The circle distracts me when I'm watching videos or movies. It doesn't read my fingerprint sometimes, even after registering them with the case installed. The sound seem muffled on both low and high volumes (the speakers of the s22 ultra are the best in my opinion) You can also feel the vibrations. Overall, it's not entirely bothersome for me and it does a great job at protecting my phone.

EXCELLENT GRIP!! Grooves, thick sturdy edges, rubber like feel, and included (optional) wrist strap nearly eliminates the possibility that this phone will slip out of your hand. If you do drop your phone it definitely won't be because of this case. The case also has raised edges around the entire screen and all glass is protected (including the camera lenses). I believe that this sturdy case would provide excellent drop protection and it's waterproof design should also provide great water resistance. However, I'm not about to test either of those probable protection capabilities with my expensive Samsung Galaxy S22 Ultra inside of it. Wireless charging with my cheap wireless charger works fine with the case, it's just a bit slower than it did without the case. Negatives: To provide all of this likely protection, the case probably doubles the cubic volume of the phone itself. Yes, its bulkier than many other cases, so you have to decide what's most important to you. For me, the ability to grip the phone and to protect it is worth the extra bulk. The other negative is that my fingerprint reader hardly works. Its likely that the special circle in the integral screen protector for the fingerprint reader isn't placed precisely enough for the reader to work. (Of note is that I really hadn't tried the fingerprint reader much prior to placing my new phone inside this new case where it has remained ever since). Because face recognition and screen swipes (or codes) work perfectly to unlock the phone I can live without the fingerprint reader as long as I get an excellent grip and probably great phone protection with this case.

So as my title says I'm on the fence. I guess I'll probably use it for a couple of days just to see how I like it and if I can deal with the issues that I'm seeing and if not I'll return it.So first off, I saw other reviews stating the fingerprint sensor didn't work and they had trouble typing through the screen. I have not had those troubles my fingerprint sensor works just fine you have to re-register your fingerprint and before you do ensure you use a squeegee or something to really squeegee the sticky spot that goes over the fingerprint down well. As well, it's good to register your fingerprint each fingerprint you use two separate times, I do it while I'm holding the phone and while the phone is on the table. There's also an option to turn the touch sensitivity on the screen up, it was a little Hit or Miss before I did this but after I did this I'm having absolutely no issues.The case is kind of a butthead to put together. Everything fits in nice and tight and it's a very tight latch as you're pushing the two pieces together which is obviously a good thing. It means it will secure your phone and protect it in a drop as well, it will be nice and waterproof and dust proof.The S-Pen and the charging port are both covered by a piece that opens on either side and is attached to the phone in the middle of the piece. The first time I pulled it out I accidentally pulled the whole thing out though I tugged harder than I should have. You can replace this by taking the back of the phone case off and sliding it back into the little slot. This is a fairly tight fit and I'm sure over time it'll work itself a little looser but again this could be bad or good depending who you ask. If you're very hard on your phone's and work in Dusty wet environments is probably a stellar feature. If you primarily wirelessly charge and rarely ever use the charging port, probably an excellent future. Speaking of the wireless charging works just fine. If you use your s pen a lot, you may dislike it because it is covered though you can remove the whole piece to where the charging port and that S-Pen cover is exposed at all times.It definitely adds width to the phone, and is probably about half of an inch thick.Be back seems to be made of a thicker clear plastic than the front, and where the camera is there is a foam pad.The case did come with these three little circles which I imagine are supposed to go over the camera lens, but I actually had some camera lens covers for it that went over all of the camera lens. If I decide to keep the phone I will probably cut away some of the foam pad around the camera lens. As I have it right now it kind of bulges the plastic surrounding the camera out. This does not seem to affect camera quality, I'm not getting any dirty lens notifications, the picture seems to be just fine.Overall the case feels good in your hand, it feels sturdy and it comes with a small lanyard which if you are clumsy and tend to drop your phone out of your hand a lot or like to have your phone in your hand very often, you may want to utilize. It's just a small little lanyard like what you might have found on the old digital cameras. Stick your hand through it before you grab the phone and if you drop it your arm will catch it.the drop protection seems like it would be very secure. The edges extend well above the screen and back of the phone on the top bottom and both sides. With some cases this can affect edge functionality so if you use the edge some of these types of cases tend to be a pain in the butt, fortunately this has not given me that issue whatsoever. Also on a lot of these types of cases these swipe gestures functions can be hindered. I use swipe gestures and can hardly even function the phone without them as I found out when I first unboxed the phone, so I was worried about that as I was putting the case together. I have had to replace or return previous cases for that exact reason. Previously all I really ever would use is OtterBox because everything else was extremely expensive or would hinder this part of my phone.So far I've had no trouble with it. It took me kind of a second to get to know where I had to swipe as it did change a little bit but it did not block any of the spots for the swipe gestures enough to cause a problem. I can still navigate apps I can still bring up the running app screen, forward and back still works no problem. As does the one-handed mode, Samsung pay, and home.The phone is nearly entirely enclosed and there's a kind of gasket that runs around the entire thing that essentially creates an air and watertight seal on the phone with the exception of the vent and the speaker. Over those are these little screens that look to be made of a micro mesh. This may stop water and dust from getting in but it also will hinder your sound a little bit. The overall volume of the phone on full blast has reduced a little bit as well when you are listening to something on just the phone, you can feel the back plastic vibrate. I actually typically use a Bluetooth set of headphones, so it's not really a big deal, but if you often use your phone for its own volume you may not enjoy this. I do still fairly often listen to my phone with my phone being the speaker, and I also use it on my TV for private listening so I can listen to it and watch TV without bothering my son sleeping or something along those lines. So I have not quite decided if it's going to be a problem for me or not. But it is definitely noticeable and I think what is happening is the vibration of that back plastic kind of essentially dampens the sound by maybe interfering sound waves. It does sound a little bit more tinny than normal, but we will see.Overall my impressions of the case or that it will do a good job protecting. Unless you were to drop it directly on the screen or the back which in any case that's going to be an issue.You cannot utilize other screen protectors with this phone case. The phone case has its own screen protector and it is built in so essentially once the screen protector is scratched up, you will either have to replace it or remove the screen protector from the phone entirely and put in your own. Now this is a possibility from the just looking at the case, though I don't know how securely it is glued in.Overall I think the phone case is a good value will protect the phone and is of a good price. I feel confident that this will protect my phone at least on the edge drops as well as the OtterBox will. I do worry about it being dropped on the back and hitting something, but there's a 50/50 chance it hits the back where the screen and as I said no screen protector is really going to protect from drops like that.I think all in all I have a feeling I will keep it and will be able to deal with some of the minor annoyances that the phone case provides, but we will have to see.Update product continued to have problems. Product returned. Someone else may like it, but I couldntReplaced with an OtterBox clone from here on Amazon.

This is my second time buying this. I used the previous one for over a year. and it did protect from water and all. I just had an issue with the fingerprint recognition. This time I read the reviews and saw that it was a common problem. Some reviewers also had some suggestions that worked for them. I decided to get it again. This time, I made sure that my phone was clean and that nothing touched the sticky circle. After applying I used the instrument to remove all bubbles and it worked. I didn't even have to reenter my fingerprints. One problem though. As soon as I sealed it, (I was on a call while setting it up) the other person could not hear me. I ended the call and tried calling Google and Bixby but got no response. opening it up again, I found a piece of leather over the mic area. I removed it, sealed it up again and I was able to resume my call with no issues. So far happy with the product

I’ve had this SPIDERCASE for my Samsung Galaxy S22 Ultra for almost a year now, and it has been a lifesaver. My screen was already cracked when I bought it, and I needed something waterproof—this case has been awesome.​The Good:​Real Waterproofing: I’ve used it in the rain and taken it down the river with zero issues or leaks.​Tough as Nails: I’ve dropped this phone from significant heights. Not only did the phone survive, but the existing cracks haven't spread at all.​Price: For the price, getting a full year of heavy abuse out of it is more than I expected.​Things to Know:​Muffled Sound: The sound is a bit muffled because of the seal, but if you just pop open the charging port cover, it clears right up.​Screen Protector: Over a year, the built-in protector gets scratched. Eventually, it makes your photos look a bit blurry (like an old flip phone), but that’s expected after a year of hard use.​S-Pen & Ports: Everything stays sealed tight, but you can still get to your charger and S-Pen when you need to.​Bottom Line: I just bought my second one. If you need a rugged, waterproof case that doesn't break the bank, this is it.

The cade itself is pretty durable, it adds a little bulk, but I don't mind that as long as my phone doesn't shatter when it falls out of my pocket at work, which happens more than I care to admit, and it has done its job in that regardHOWEVER, in order for the finger print scanner to work, you HAVE TO HAVE the sticker above the sensor on it. It comes with one already on the case and three replacements, and they are a nightmare. The first one had some lint/debris on it when I opened it, so I had to take it off and replace it because it would read my finger print correctly.The second one I adhered to the case before the phone but I didn't get it center, so it still would read properly. Once removed, it left a residue on the case I then had to clean off before I could put the third one on.The third one I stuck to my phone first, but it wouldn't sit flush on the screen and I had no was of getting the air bubbles out. Now. Admittedly, the screw up on this one was my fault, as I accidentally got some of my dog hairs on it.The fourth, and final one, also wouldn't sit flush and had air bubbles between the phone screen and sticker. It worked ok, but it sometimes wouldn't read my finger print all the way.I ended up taking it off completely because I took off the case to clean some lint from between the case and phone screen and ended up getting lint all over the sticker in the process. That was, again, my fault but it just proved to be more of a hassle than it was worth. So I I now use my password/code to unlock my phone and use passwords for all my applications. It's inconvenient, but is what it is.

Very durable

good quality ,made of quality products

Muy bonita, se siente fuerte, tu celular está absolutamente protegido, tenía mis dudas debido a que decía que fallaba el lector de huella pero no tuve inconveniente alguno.

Durable cover

Waste of money . Very disappointed 😞Front display clear cover protection don't have a good surface contact with the screen so for many times u need to press harder to control your screen or to tipe something. And whenever u pres the back of the phone a bit harder the sticky circle from your fingerprint is not stay stic to the screen so u need to press hard tu stick him back . Very disappointed for 27 pounds !