8GPU Mining Rig Complete Crypto Miner with Windows10,Including 8GPU Mining Motherboard 2000W Power Supply,CPU,SSD,4G RAM, 8 GPU Mining Case for ETC/LTC/XHV/Monero/Ravencoin(Without GPU)

So I don't normally do reviews, but I was so impressed with my experience I had with this purchase, I feel like I had to say something. So I was in the market for a new mining rig, to add to my current open air mining rig that was my starter rig. I liked the idea of open air rigs because it looks cool, but the GPU's were running hotter than I would like. So when I went to look for my second rig, I found that closed rigs seemed to run cooler, so I figured I would give it a try.So long story short, after doing much research, I stumbled upon this GPU mining rig from VTRETU. I ordered the rig and got it less than a week later. It arrived complete and not a scratch on it. Setup was a very simple, no different than setting up a computer. Initially I did have some questions, and the seller was able to reach out that same day. Between the seller and the customer service at VTRETU , they answered all of my questions and I was very satisfied with the level of service they provided.I installed the first 3 GPU's and powered up the mining rig. The mining rig comes with Windows 10 pre-installed and just had to make some simple changes to the BIOS and I was up and mining after about an hour. I started running with 2 EVGA RTX 3060 Ti's and 1 EVGA RTX 3070 Ti. After a couple of weeks I added 3 more 3070 Ti's and my rig has been running great so far. The mining rig has 8 GB of RAM which is plenty of RAM for mining, and the 8 fans are very strong. There hasn't been a time that I have needed to run the fans at 100% and they are easily adjustable with a knob on the backside. I normally run the fans at 60% and it keeps my GPU's under 60 degrees C or less.The case is also nice, the rig is strong, but not too heavy to set on a shelf or a cabinet and the lid is strong enough to hold a 24" Monitor and keyboard with no problem. I have attached pictures of my rig along with screen shots of the rig mining with good hashrates.Bottom line, it is a great mining rig and you get what you pay for. Bravo to the seller and the people of VTRETU for providing a great GPU mining experience. When it comes time for my next rig, I will be choosing VTRETU and Amazon. Thank you.Kevin Shelton

No display, tried everything and will not work. Disappointed.

The VTRETU GPU mining chassis works perfectly! There were a few modifications I made:1. The O/S(Windows 10) runs great. No need for downloading another O/S. Just plug the GPU's in the slot and turn on the machine.2. (please measure the available space to see if the GPU you are going to use will fit.)I am using AMD 6800xt's. Unfortunately they are too long to fit inside the chassis in between the 8 fans. I relocated the front 4 fans to the outside of the chassis.(picture attached)3. I changed the aperture size to 128MB in "chipset" tab when in the Bios. You can enter the Bios by pressing the ESC key while the computer loads.(I had to press the ESC multiple times)4. I changed the virtual memory in the "advanced system settings" menu. You can locate this by right clicking on "This PC" go to "properties" then "advanced system settings"Click on "settings" in the "performance" section. Click on the "Advanced" tab then click on "change" in the "virtual memory" section.Virtual memory:Uncheck the box "Automatically manage paging file size for all drives"Click on "Custom Size"I changed the initial size (MB) to 13000 and the maximum size (MB) to 39000.I calculated this figure based on 8GB of memory.The Initial size is one and a half (1.5) x the amount of total system memory.The Maximum size is three (3) x the initial size.So let's say you have 8 GB (1 GB = 1,024 MB x 8 = 8,192 MB) of memory.The initial size would be 1.5 x 8,192 = 12,288 MB and the maximum size would be 3 x 12,288 = 36,864 MB.Once these changes have been made, the miner should be operating perfectly!I am very pleased with my purchase. It is constructed very well and the customer support is great!I will be buying more VTRETU Chassis' s soon.

A fairly easy set up the power cord was tucked under the bar kinda hard to see, but all in all I think it’s worth the money we shall see. It is kind of loud, but you expect that.

Looks good, use vga output for quick setup, although vga to hdmi adapter included didn't work with hdmi monitor.DOESN'T INCLUDE GPU UNITS.manual fan speed knob is handyYou will need 220v to get full 2000watts.Windows installed on ssd card, booted right up.4gb memory installed 64 bit system. Just waiting for the 8 NVIDIA mining GPUs I had to buy separately.

"I Have brand new gpu's"The motherboard won't handle the programs needed and would crash. i have to buy a new motherboard, ridiculously loud

I was looking to migrate my open air rigs to server cases, but did not want to pay the cost of an Octominer. My one requirement was it has to have 8 fans for air flow across the cards, and these work nicely. Being able to adjust them is a plus, to keep power costs down while it's cooler outside. I had no problems flashing the m.sata drive with HiveOS and reading a variety of nvidia 30xx series cards, including 3060s, 3060Tis, 3070s and 3070Tis. And it looks like the CPU is socketed, so they can hopefully be upgraded if/when PoUW becomes a thing. All in all I'm pretty happy with this purchase and will seek these out should I look to expand my GPU mining farm in the future.

Got it earlier today and plugged it in and no lights or anything turned on. Tried multiple cables/outlets and still nothing. Needed to test gpus before the return period and now I can’t. Overall bad experienceUpdate, they sent me a new power supply and after roughly a week I got it and everything seems to be working fine. I’ve definitely run into some problems but I’m not sure if it’s NiceHash or the hardware. Overall though not bad definitely not quiet though.