amFilm Screen Protector for iPad Air 3, iPad Pro 10.5" 2017 Tempered Glass

Highly Recommend!!! This was my second time purchasing this product (a friend and I each took one of the screens the first time). I use the iPad for my schooling while on rotation as a medical student, which means it gets brought into the hospital daily. As a student I am constantly moving around the hospital, which makes it easy for my iPad to get dropped or moved. A few weeks ago my iPad was dropped on the concrete floor - the screen protector cracked, but my iPad did not have so much as a scratch! For around 5$ per screen protector, compared to the couple hundred for Apple Care replacement or roughly a thousand dollars for a new iPad, this is an incredible deal. A couple key points: 1. even after the screen protector cracked, it still remained fully intact from the adhesive to the screen...this meant my iPad was safe from any liquid or debris until my new screen protectors arrived 2. the new screen protectors arrived just as quickly as the first ones..always a bonus 3. installation is very easy and all of the tools come with it. having installed multiple different screen protectors on my phone and other tablet devices previously, I can honestly say this installation was the easiest with the best results (you don't get the bubbles of air that just won't come out like you do with cheaper built screen protectors) I honestly don't have anything even remotely negative to say about this product. Right price, provides even better protection than expected, and easy to install. I will never go without one of these on my devices again - a must have for anyone looking to keep their iPad screen safe even in non-office settings.

I have bought from Techmatte for probably 5 years it seems. I have had their screens for Iphone models 4, 5, 6+ and iPad models Air and Pro 10.5. These protectors have been in plastic film and glass. The latest glass versions such as the 10.5 are excellent and work just as adverstised. In the past I used the plastic versions and like them better since they do not break easily on installation and will not break when dropped. Installation of the plastic screen is more tricky and they seem to be more suscepitable to dust entrapement. It appears that the glass version will actually hide the dust in the glue but that is just a guess. This specific product was easy to install and since I had two I just jumped in and did it the first time without all the preparation such as steaming bathroom, etc. Here is what I did and recommend: - If you have very dry air and detect static anywhere in your house then do this project in a recently steamed bathroom to kill off dust and static. - turn off all air handling systems such as A/C or heat, ceiling fans and get in an area with NO AIR MOVEMENT. - find a hard surface to work on like a desk and make sure you have strong light. Wipe off the entire work area to get rid of dust. - read instructions and watch video before starting. - wash your hands, wear the most lint free clothing you have. Dry hands with paper towel. - clean your screen with dish detergent and water but only on a 1” area of paper towel. Dry screen with paper towel and look at an angle for dust. Blow off whatever dust you see. - wipe screen with alchohol wipe provided. Go from one edge to the other and off the phone. - wipe the damp screen with the microfiber cloth supplier in circular motion and check for no dust looking at a angle of reflection. - peel off step one but do this away from the phone and do it slowly to make sure you do not have static buildup attracting dust. - looking straight down carefully align the home button and speaker holes. I have found that some times just centering the screen and using the sides for equal clearence works best. Now gently touch the glass to the screen and let the attachment flow...you will actually see it flow like water from point of contact to edge. I would not touch or press until you see most bubbles are out. If you have some then gently work with the squeege out from the center to the edge. Once you have it all in hand then you can press harder. Do not attempt to lift and reset as you will only find you get dust and loss of adhesion. I think this is why you get two in this package! - If you see any dust then put the device in a warm place or in the sun until it warms then try to squeege it out. If you have no success then just wait a few days as it may just go away as the glue flows around the dust.

So NOT SPONSORED First off this is not sponsored and second of all I don't understand why a lot of people have had problems with the screen protector it's really nice I actually have the same Brands screen protector on my phone my iPhone 6s so I know that it's reliable brand for my phone I had screen protectors in a pack and I had one of the screen protectors on my phone for an entire year and then I changed it this lastb month because I was always dropping, my phone or something like that and I got the screen protector for the iPad Pro yesterday which was February 9/18, anyway so it was a really easy to install just like my phone the only thing that you should worry about what I did to make sure you use the little card to get all of the bubbles out from under the screen protector otherwise installation ssssoooo so easy and it just glided right onto the screen I didn't have any problems with the screen on the iPad itself and and it pretty much looks just like the screen itself it was shiny and it was clear moreover it's a pack of 2 whereas a lot of other Screen protector brands only have 1 and I didn't really see anything under it looks just like the actual screen you also should worry about aligning it correctly I always end up having it over the home button a little too much but that's not really a problem so yeah since I have it on my phone and my iPad I really do like the brand and compared to other screen protector Brands this has to be the best one that I found for me I don't know about you but I hope You find it as easy and protective as me...!

My iPad’s oleophobic coating is almost gone since I’ve had it for almost 4 years now. It became susceptible to fingerprints and dust and has been getting annoying to clean often. The screen protector, for its price, is good enough. The screen is smoother again (need to get used to writing on slippery glass again lol), not a lot of fingerprints, and easier to clean with a cloth. The installation process is typical. The way I aligned the screen protector to the iPad was a little bit crooked but there was no going back without ruining it. I did have a few bubbles that I had to push out. One bubble didn’t go away no matter how much I tried. After a day, the bubble finally went away. The screen protector is very reflective. As you can see in the pictures, it almost looks like a mirror. Overall, I’m satisfied with this purchase, especially with what you get for the price. I’m glad to have a “new” feeling with my iPad’s screen, how it’s easier to clean, and not have to worry about fingerprints.

So I got a new iPad Pro 10.5 for Christmas and wanted to get a screen protector on it right out of the box. Did a bunch of research and finally went with this product for two reasons. First, they give you two so if you mess up there is a backup. From having installed iPhone screen protectors many times over the years I know that the process can go quick and easy or can be brutal particularly if dust enters the equation. Second, I really liked the method of applying this protector with the tabs at each end. Before starting I watched the manufacturer's website installation video which gave a couple of useful tips. I carefully opened my new iPad and loosened the plastic cover on the device. I then slipped one of the protectors out of its envelope and found tab #1 placing the protector with the sheet attached to tab #1 facing up. I held my breath and then gently pulled tab #1 removing the film covering the adhesive side of the protector. I immediately grasped the tabs attached on the remaining film on the protector and flipped the whole thing over. I completely uncovered the iPad exposing the glass to room air for the first time. The tabs then allowed me to suspend the protector above the iPad making alignment of the camera and home button cutouts a snap. I am a perfectionist and with minimal trouble got the screen protector aligned to less than 1/2 mm out and then lowered the protector onto the iPad screen. The protector immediately sealed itself to the iPad with a couple of small residual bubbles easily pushed out in seconds with the provided squeegee. I then let our my breath satisfied with a pretty perfect install in less than a minute with an extra protector left over in case I should need to replace this one. Not bad! Also looks great and the iPad response to touch is not diminished at all. So, the two reasons I chose this product worked out. Most importantly, easy accurate installation, and secondly an extra protector for a rainy day. Note, I did not use the screen cleaner or dust removers as my iPad was new out of the box but if I have to do another install in the future I will definitely use all of those things.

This screen protector fits perfectly for my iPad Pro10.5inch! I like how there’s two of them in case it cracks and I really like how they give you instructions on how to put it on even though I messed up many times I think it was very easy to use. I will highly recommend buying again!!! >:D

I gave up on screen protectors a long time ago. They peel, get bubbles below them and feel wrong. I got this for my iPad and it's just great. It is tempered glass. It comes out looking like a flimsy sheet of plastic. It doesn't feel like plastic and while it feels different then your device screen, it does feel like glass -- because it is glass. Any scratches you pick up and can't live with can be remedied by a new sheet. It's supposed to protect against drops, though I'm not sure how much protection it provides. Videos I've seen show them dropping steel balls on it and the protector cracks in a spider web pattern, just like real glass. They removed it and the original screen is safe and sound. Only a few companies in Japan make this glass so all of the vendors that sell these buy large sheets and cut them to spec, so no matter what you get it's going to be pretty much the same. What sets the vendors apart is how they cut them. Avoid the ones that have partial cutouts (don't use circles for the home button). I really like this amFilm I bought on Amazon. Fakespot says their reviews are genuine. I messed up my installation (I didn't follow the instructions) and contacted the company. They responded immediately and asked me to give them my order number and a picture of the problem. They are sending me a replacement free of charge, even though it was my fault. Many vendors only give you one protector. This one gives you two. This protector also has a feature that others that I've tried don't have; it comes with "installation wings", which are little tabs on each end of the protector. When you remove the film backing covering the sticky "face down" side of the protector, these wings give you a way of holding and positioning the protector before pressing it to the device. It makes a BIG difference in terms of lining it up the cutouts and corners of the device. Without it you have little way of positioning the protector and you are much more likely to not stick it right the first time and increase the risk of getting dust and/or fingerprints on the device or bottom part of the protector. This is perhaps the #1 reason you should pick a protector that has these wings. I suppose you could create your own by using some tape and putting it on the top, but these are clear so are easy to see. When installing these, do it in the bathroom after you take a shower. The steam helps zap dust particles so you won't get dust between the phone's screen and the tempered glass. When cleaning your screen, take your time. Clean it several times with a damp cloth or eyeglass cleaner. Then use the alcohol swabs that comes with this then dry it with the dry cloth they also provide. The instructions don't mention the following tip, but this is probably more useful than working in a steam filled room. Take a strip of regular packing tape (not the type you have to wet) and pull the two ends together so the sticky part is facing down, and gently blot your screen all over to remove any dust particles that might be on the surface. It gets rid of any dust particles that might be leftover after cleaning. Take your time and cover every single square inch. Do it at least twice. When applying the protector, use the "wings" on the applicator to line up the cutouts for the home button and camera. Make sure you also have the four corners exactly in place. Once you've placed it onto the device, take a finger and swipe across the middle of the device, lengthwise. It will magically push the air out towards the ends. Then use a credit card to push out any remaining air bubbles. My only beef with this kit is the little card they give you to squeegee out the air bubbles is too flimsy. Then remove the top sheet and you're done. If you have any remaining air bubbles, squeegee those out as well. Don't worry if you still have some bubbles near the edges. I had a few but they disappeared overnight.

I purchased the screen protector for a 10.5” iPad Pro. It was a replacement for the original that I had on it when the ipad was new. I have a Logitech keyboard case on it, and accidentally dropped the ipad on a tile floor. It landed face down, the edge of the glass screen protector cracked in a couple of places, but stayed intact and I thought perhaps the screen of the ipad had cracked underneath, there was no way of knowing until I ordered a new screen protector and removed the old one. When I got ready to remove it, I started looking for a number to contact the company to ask them for the safest way to remove the old screen protector in case the screen was damaged. There wasn’t one on the packaging or instructions. I went to their website, no number. They had a email, so I requested that someone contact me and no one replied. There wasn’t a tech person that offered on-line support. I went to YouTube, they had instructions for other products from consumers, but not the company. No one addressed the concern I had. Two days had gone by, no response from the company. I went ahead and removed the product myself, carefully. There was not a crack in my screen. The instructions were printed in such small print they were unreadable. So, I tried to put the new screen on and it had a ton of bubbles. I tried over and over to wipe them out with the cardboard piece that was included with no luck. That didn’t work. So, I tossed that one aside and opened the second screen protector. I had it lined up and ready to go. It was perfectly lined up, but still had a ton of bubbles. When I pulled the second sheet off, it was incredibly tacky. Brilliant! I flipped it over, and it went right in place. ALL of this could have been avoided with two things. 1. Instructions that are large enough to read. 2. Phone number to call for questions OR a response to emails when a customer has a question. The unfortunate thing is that I have bought this same product for my previous ipad. For three different iPhones for myself, and for gifts. I never had a problem before. Just a little consideration would have made all of the difference. Now that I know how bad the customer service is, I won’t be as quick to recommend your product. How disappointing. And now I don’t have a backup which was the purpose for the “two” screen protectors! EDIT: I dropped it again. The protector cracked by my ipad did not, it was saved by the TechMatte screen protector. I did look at a YT video before installing this time. I no longer have tile floors, but I feel better knowing that I have a product on my devices that will hold up. TechMatte, you’re a 5-star product from now on. Thank you!

Great product, everything was included such as dust stickers, wipes and another spare screen protector. I used this for my iPad Air 2019 and it fits perfectly

Slim iPad Tempered Glass. comes in 2 pcs of glass protector. Because its a glass, there will be light reflection, very glossy and a fingerprint magnet protector. But other than that, it's a tough and high quality of tempered glass.

I have tried many different screen protectors from many different companies and can say hands down the one I purchased from Techmatte is by far the easiest one to install. The extra large tabs make it very easy to line up for one try and done install. Not one bubble appeared (which is a first) and it literally took 2 min or less to install. For a perfect install, take your time on cleaning the surface of your device as described in the instructions and you should have no problems. This two pack of protectors are well worth the money and comes with a lifetime warranty. The only issue I see possibly in the future is with the lifetime warranty. I noticed something on the little ATTENTION card you get in the box to remind you to register the product. It states that replacements can only be shipped to US addresses. If this is true then I have a problem with this since this product was being sold on Amazon.ca this could be a deterrent for anyone in Canada to purchase and that would be a shame since so far this is looking like a great product.

Este protector es bastante funcional, me encanta por que ajusta totalmente en mi iPad , no batallé nada en instalarlo y me encanta que casi ni se nota que traes protector. Trae dos protectores en el paquete que compre por lo cual, tengo para largo.

I'm actually really impressed with this item, and I am pretty hard to impress. It was easy to use, the instructions were clear, the film practically melted right on - I had very few bubbles to smooth out, and the performance is great. It is somehow a little more reflective than the ipad glass, if that matters to you. Works great with Apple pencil which is my primary use/tool for this ipad. Oh, also there are far fewer fingerprints to clean off this film than without it. I clean it once for probably every 4 times I would have to wipe the screen without it. My ipad is in a case so the intended use for this is scratch resistance. Will have to see how the adhesive and performance is over time, but so far I think this product is great.