Question 1

Hooked it up to come on w reverse lights. Works in reverse with engine off but only sometimes works if engine is running. 2008 Silverado. help?

Accepted Answer

as your description, I think you need add a filter between system and power souce, because we found some old US - Germany made vehicle the power current is not a DC current, it is just a Pulse signal current when the engine is running. so can you buy a filter to add to reverse lights and camera circult ?
if you don't know how to buy one, just contact us   leekooluu@outlook.com
we can provide one for you

Question 2

Can you buy an extra camera for this product?

Accepted Answer

Two separate answers to this, can you hook up two cameras to the one monitor or not?  What is the link to the extra camera if yes?

Question 3

On a dodge caravan, how did you run the wire the length of the van without it showing?

Accepted Answer

You can run the wire along the bottom of the door under the trim. Or run it along the roof over the headliner. 
Camera power and the signal to turn the camera on usually comes from the reverse lamp. So you will likely have to remove some trim in the back to get to the reverse lamp wire - check your manual for how to replace that bulb - that will show you how to get to the wire. 
A problem with many cars - especially vans and SUVs is the reverse light is mounted on the car body, while the license plate is often mounted on the lift-gate or trunk lid. So you'll have to work out a path to get from the reverse lamp to the license plate. That may take several more feet of wire. 
Some SUVs have rear glass that rolls down in the lift gate. If so, you'll need to be extra careful to run the wire so that it goes around the window and doesn't interfere with its operation. 
Sometimes there is an advantage to going down the passenger side rather than the drivers side. Check out the entire path and see how any existing wire is run before running your own wire. 
Be sure to secure the wires so that they don't rattle, move around, or get caught in things. 
Check how the camera will mount before you run any wire. Sometimes mounting the camera on the license plate interferes with the gate latch or other items. 
You'll probably want the camera mounted in the center left/right. Not all license plates are centered. It may be easier to mount the camera at the top of the lift gate rather than going all the way down to the license plate.

Question 4

How to order windshield mount?

Accepted Answer

you can order from below link, or you can contact us get it free.
https://www.amazon.com/dp/B07HGT728F

ASIN	B06XKPQ6YZ
Best Sellers Rank	#1,184 in Electronics ( See Top 100 in Electronics ) #2 in Vehicle Backup Cameras
Brand	LeeKooLuu
Built-In Media	1* 4.3 Inch Monitor
Compatible Devices	Monitor
Connector Type	4 Pin
Customer Reviews	4.4 4.4 out of 5 stars (15,525)
Display Technology	LCD
Effective Still Resolution	1080 pixels
Field Of View	149 degrees
Installation Type	Surface Mount, Dashboard Mount
Item Dimensions L x W x H	5"L x 3.1"W x 0.78"H
Item Highlight	25-Minute Easy to Install, Monitor Easy Setup, Bright and Clear Night Vision, Dustproof & Weatherproof for Cars Trucks SUVs
Lens	Wide Angle
Manufacturer	LeeKooLuu
Mfr Part Number	LKL-080
Model Number	LKL-080
Number of Items	1
Number of Packs	1
Optical Sensor Technology	CMOS
Real Angle of View	149 degrees
Screen Size	4.3 inches
Unit Count	1 Count
Video Capture Resolution	1080p
Voltage	12 volts
Warranty Description	2 Years

HD 1080P Backup Camera Plug & Play: Fast 60FPS Smooth Real-Time Clear View

Details

Details

Description

Specifications

Common Questions