Gempro Led Sequential Front Turn Signal Lights White DRL for 1997-2006 Jeep Wrangler TJ Smoked Len

I only replaced the front two turn signals. I did not update the relay switch yet - all other lights are non-LED. Without updating the Relay switch, the lights will flash faster than normal due to the lower power draw. This took me 10 minutes. Quick note, the instructions were a little hard to follow here... when you pull the light out - look at the Jeep wires into the turn signal assembly. Find the one that looks red (should be one on the outside - not in the middle of the three) - then when inserting the socket fixture of the new light into the bulb, simply match the red wire of the new assembly to the same side (both reds on bottom / or top) and set the new plug the same orientation. Additionally I have the progressive turn signals starting from inside to outside on both lights - you may not get it right the first time, so don't screw in until you have the orientation of the progressive turn signal lights the way you want them. Great product. Easy to install.

Looks great on my 2005 TJ. Plug and play, but you will have to replace the relay. It is located on top of the steering column. And I’d the 5 prong relay. Definitely recommend as it looks so good.

Worked for about a month and then one light stopped working. Reached out to seller with no resolution.

Not as snug fitting as oem, but otherwise super easy install, very decent looking. Also, where the OE plug clips in, get a thicker gasket, or make your own.

Over priced garbage. I’m sure the lights are fine except the fact that I paid twice as much as other options for plug & Play. These are far from matching the plug on a TJ! Now I paid extra and have to cut both plugs off! Totally mis represented product! Don’t bother buying these. Save $100 and receive directions on what wire does what. Oh and blacked out lights that don’t even include black screws like the cheaper option

Ok, so L O V E the look and install was easy HOWEVER...there is a dedicated left and right (they are not marked either, so trial and error). Additionally, not plug and play...I have a 2000 Jeep TJ and had all lights hyper flashing when engaged turn signals. SO, bought a new flasher relay (EP26 for me- note I also have LED tail lights) that accommodates led turn signals and it resolved flashing issue. New relay was $16 on Amazon. All was worth it !! I LOVE THE LIGHTS AND THE LOOK and how they work!!!!

Plug and play means it won’t effect rest of system. I assumed I would not get hyper flash, but I did. After some serious aggravation I got them to work properly. You need to get an “LM470” flasher relay. DO NOT BUY THE “EP27”relay unless you also change taillights to LED as well. 15 minutes, 3 days what’s the difference?

These are a good looking product. Functionality is great as well.

Fonctionne très bien