The kryoM.2 Evo is a PCIe 3.0/4.0 X4 adapter for single-sided m.2/M-key NGFF PCIe SSD and is compatible with the size 2280.

Functions and features of the kryoM.2 Evo:
- Large passive cooler for the top of the SSD.
- Compatible with PCIe 4.0/3.0- Integrated heat sink for the rear cooling of the SSD
- Configurable LED lighting and additional activity display.
- Silicone seal protects the SSD from environmental influences and serves as a light guide for the LEDs.
- PCIe lanes impedance controlled for high signal quality, high data rates and avoidance of reading errors>- PCIe plug with hard gold coating
- Fully gold-plated PCB.
- Front panel with improved ventilation.

During installation, the SSD is pressed between the full-surface passive cooler and the rear cooler with thermal pads and optimally cooled. Both heat sinks are made of aluminium and anodised black. On the outside, a silicone insert protects the built-in SSD from environmental influences, which is additionally illuminated all around in a warm orange. The lighting can be switched on or off or light up when the SSD is active. An additional SSD logo on the back of the board (in ATX cases facing upwards) is backlit when the SSD is active.

The highest quality has been paid to all components: the PCIe contacts are plated with hard gold and the PCB is completely gold-plated. The M.2 connector uses brand quality from Amphenol or Kyocera, the conductor tracks are controlled in their impedance.

Dimensions: approx. 128 x 93 x 23 mm incl. Slot bezel

Box contents:
- Adapter board.
- Passive cooler for top made of black anodized aluminium>- Passive cooler for back made of black anodized aluminium>- Mounting material incl. thermal pads

Please note: SSD not included. Compatible with M.2 design 2280 (width 22 mm, length 80 mm), height S1/S2/S3 (equipped on one side, maximum component height 1.2/1, 35/1.5 mm, corresponds to max. 2.3 mm incl. PCB), m Key.