2 Pcs 27W LED Work Light Offroad Flood Beam Driving Lamp Truck SUV UTE 4WD 4x4 Boat Camping Light 12V 24V

This review is for a pair of WOWLED 27W square LED Work Lights, puchased on 30 October 2018. It will mainly concentrate on what items were included in the package, and their dimensions. As I have just fitted them to my loader, I cannot comment on their longetivity or reliability. The lights arrived in a pair of boxes, with each box containing: 1 x square worklight with 9 LEDs 1 x 55mm long x 20mm wide x 25mm high mounting bracket, made from 2mm thick metal 1 x M10 x 25mm fully-threaded bolt, flat washer, spring washer and nut 1 x M8 x 65mm partially-threaded bolt, flat washer, spring washer and nut The M6 bolt is for securing the light to the bracket, and the M10 bolt is for securing the bracket to the vehicle (or whatever you want to mount the bracket on). The only paperwork in the box was an A5 single page sheet in English and German, giving a 10% off code and a totally useless 6-point "Product Instruction". The English version was poorly translated, for example: "(2) The suitable design for heating elimination" and "(4) The valid irradiation distance is much more longer than normal bulb" The box was printed with the following specifications: Voltage: 9-48V DC Lumen: 27W = approx 2295 lm, 18W = approx 1530 lm, 15W = approx 1295 lm Size: 110 x 110 x 62mm Working temperature: -40deg C to 85deg C Color temperature: 6000K Dust and waterproof: IP67 Because other reviews mentioned that the bolts rusted very quickly, I had intended to replace them with bolts from my own stainless steel collection, but both the supplied bolts and the M10 nut were marked A2-70, showing they were A2 stainless steel. There is no marking on the bracket or washers, nor would I expect there to be. The light is 106mm x 106mm square (or 106mm x 128mm if you include the mounting boss), and is a maximum of 46mm deep. There is an 8mm diameter mounting boss which is 48mm long. I cannot explain why the box says the light is 62mm deep. On the back there are cooling fins and a two-core 0.75 sq mm cable, approx 260mm long, with soldered ends. Presumably made of die-cast aluminium, the light feels extremely solid and has a matt black slightly textured finish. The lamp and brackets give the impression of a high-quality and robust item, and it certainly feels more expensive than you might expect for £9 each! When tested on the bench with a 13.3V supply, the light consumed 1.6A, so three of them wired together (2 at the front of the loader and one at the back) on a running vehicle should consume about 5A. After fitting them, I found that the spread of light was great for my requirements. I was wanting a floodlight rather than a spotlight, and these lights gave a soft-edged and reasonably wide beam. The only oddity was that the M8 nut and bolt didn't fit a 13mm socket, and a 14mm was a very loose fit. So far I am extremely pleased with my purchase, which fully deserves 5 stars, and am just about to order another pair.

Put them on my Dodge ram as a rear work light and reverse, what a difference, turn night into day. Look good too.

very good thank you

Nice and bright ,but the wiring is way to short ,had to extend to be able to wire into my boat, an extra foot or two wouldn't hurt ,im sure that wouldnt put the price up much at all ........

Really bright! Solid well build! Comes with bolts and bracket, really easy to fit and works well

Very bright! It gives the same output over a range of voltages- internal regulation must be good. Light in weight, I replaced some old clunky LED lights with these. Smaller, lighter, and brighter. I would have preferred a junction box rather than pigtails, but at the price...

Great product

I Purchased this unit as a bit of an experiment,as I wasnt gambling with too much money. It was very easy to install, and the result I got was amazing. They replaced x2 halogen work lights on the tractor, and put the remaining halogens to shame! So now I'm gradually replacing them all with this 5 star product.