GoPro Suction Cup Mount (Official GoPro Accessory)

I bought this because I found the GoPro Magnetic Clip did not have strong enough adhesion for my use case. As can be seen from the first photo there are a large number of parts which can be configured in a number of ways. The Suction Cup is very well made with a large suction area. It can easily support the weight of the GoPro with the Media Mod and Light Mod attached. Important The Suction Cup will only adhere to a flat surface. Some surfaces that appear flat are not. For example I attached the Suction cup to the side of an IKEA wooden bookcase and it fell off after less than ten minutes. In contrast it stuck to a painted wooden door for several hours without falling off. It is important to try out the surface by attaching the Suction Cup and leaving it for a while (I would suggest at least as long as you intend to use it with your GoPro) before attaching the GoPro I think it is a little pricey, but it does its job well

Works really well. I used it when I went to the French Alps for 3 weeks in the summer. I used it inside and outside the vehicle on the windscreen and on a flat part of the bodywork. The suction power is really strong, no worry of it falling off. Though just in case I did have a lanyard on it which I was able to trap in the door and connect to the GoPro for peace of mind. It comes with loads of different attachments so you can get almost any angle you could want. It's very sturdy and there is little/no vibration interference on the footage. Before I went, I had it stuck onto my bedroom window for 2 weeks and it never fell off. Definitely recommend it to anyone who wants to get some good footage whilst driving.

SHopped around to find a good suction mount for my go pro and thought I'd give the official GoPro product a try. It hasn't disappointed. I used it on a trip to the Italian Alps and after being attached to the car for 3 hours or so it was still holding perfectly solid in position on the back wing. I was a bit concerned about it coming off so tethered the camera itself via a line into the car through the back window but there was absolutely no need. Once attached to the suction mount there was no moving it. Very pleased.

The GoPro Suction Cup Mount is a well-built and reliable accessory, perfect for capturing stable footage on cars, boats, and other smooth surfaces. The suction is strong, holding up well even at high speeds, and the adjustable arm provides good flexibility for different angles. However, it's best suited for flat, clean surfaces—on slightly textured areas, the grip can be less secure. Also, while it performs well in most conditions, extreme heat or cold may affect its hold over time. Overall, a solid mount for action shots, but always double-check the seal before use.

This is by far the best and only suction mount you should use for your gopro if you use it on the outside of your car. It will NEVER fall off if you attach it correctly. I used this on my car for a whole week when I went on holiday to devon this year. Didn't come off once and never had any problems with it.

Good quality

What can I say. I’ve used it, it works, it holds on tightly, it’s easy to use (if you follow the few correct steps), and it feels durable. Even if it costs quite a bit more than other cheaper suction mounts, it’s worth the money for peace of mind and is long lasting.

Purchased to mount a Go-Pro to a windscreen on a track car. I’ve now done 3 track days with it and not had a single issue. It’s simple to use and includes a good selection of adaptors to get your desired angle. I’ve also mounted it outside a vehicle with a Insta 360 attached, no movement over a 20 mile drive at motorway speeds. You do need to make sure the area is clean and flat and it’s wise to use a tether if mounting externally.

Si estás pensando en comprar una base con ventosa de otra marca y la de GoPro, no dudes en comprar la de GoPro. No tengo nada con los accesorios y repuestos de otras marcas, algunos están bien fabricados y el ahorro podría ser más o menos sustancial (yo tengo accesorios de otras marcas y no me han fallado... dije "fallado", que no significa que me guste el diseño y la totalidad de sus materiales y construcción). Ahora bien, cuando se trata de algunas piezas (como esta), la marca sabe perfectamente lo qué está haciendo y sabe para quiénes lo está ofreciendo. GoPro tiene claro que tiene que ofrecer accesorios con un margen de fallo prácticamente reducido a cero porque el usuario de la cámara puede ser exigente (o imprudente) y, como en este caso, la ventosa será el soporte de la cámara (por supuesto, con el contenido que a veces es lo más importante) en algunos momentos y lugares donde se quieran tomar imágenes realmente buenas. Yo la compré después de ver varios videos y reseñas fuera de aquí y, sin mentirte en lo absoluto, no estoy arrepentido de haber escogido la de GoPro. En cuanto se adhiere a la superficie (obviamente lo más plana y limpia posible), prácticamente no hay manera de quitarla a no ser que la liberes del seguro. La usé, hasta el momento, en cristales en movimiento y, ni el movimiento ni mi mano con fuerza considerable, pudieron hacer que se desprendiera. Desde luego, con esta o con cualquier otra, te sugiero que evites superficies de concreto, maderas, obviamente telas, etc., esto ya es un poco de sentido común y, aunque parezca que sí quedó adherida en algunos sitios, no te sugiero que la descuides sin asegurarte de que no caerá. Insisto, es sentido común y precaución. Lógicamente si recibe algún golpe accidental muy fuerte irá al suelo, pero básicamente es lo único que se me ocurre que podría despegarla junto a una mala colocación en la superficie. Puedes agregar un cordón si eso te hace sentir más confiado o, de plano, optar por otro mecanismo de sujeción como una pinza o lo que se te ocurra. Al inicio es un poco complicado seleccionar la configuración de piezas que deseas para montarla en la dirección que la necesitas, pero después de un tiempo de usarla te acostumbras y eso deja de ser un problema. Un consejo: guárdala siempre limpia, sin tierra, polvo, grasa o mojada, y en un lugar sin humedad y lejos del sol. Eso hará que la ventosa dure bastante.

Jak najbardziej polecam .. przyssawka odebrana dzisiaj.. szybka dostawa

Den sitter som ett berg! Man får vad man betalar för. Detta är bra grejer

Ottimo prodotto, molto versatile, con i vari attacchi trovi subito come posizionare la Hero come meglio credi ma la cosa più entusiasmante è stata la ventosa, ottima tenuta, basta spingere bene il bottone centrale e abbassare la levetta che non la stacchi nemmeno con le tenaglie, sul vetro dell'auto è perfetta. Sono rimasto soddisfatto, devo dire un po' caruccia come prezzo ma se fa bene il proprio lavoro, come spero, sono soldi spesi bene.

Vakumlu çok kuvvetli. Daha çok teknemde kullandım. Her türlü hava koşullarında ve dalgalara karşı vakum hiç atmadı.