UNIKA MitreBond Superglue & Aerosol Activator

Excellent product for an excellent price. Used this for some skirting and it took almost instantly and held perfectly. It’s very easy to use, glue on one piece, activator on the other and then just hold the pieces together for a few seconds and that’s it. Very versatile and can be used for most wood joints. As a note it does go off very quickly so make sure you’re ready with the pieces you are sticking together.

I was pleasantly surprised at how efficiently these two items work together. The glue is a little thicker than the Loctite superglue but it works extremely well! I found that the activator was the thing that made the difference. Apply the glue then spray the activator and the bond is formed. The bond with this glue is extremely strong just to test it. I used it on two small pieces of steel it when I tried to pull them apart, they bent. I would highly recommend this pack.

bonding 3d prints can be a bit hard sometimes this solves the issue with little cleanup required after the spray dose smell pretty rough but sets the glue super fast sometimes too fast

They arrived parcelled together and although id never used the dry spray before its really useful, good quality , does the job, easy to use it, I've had no issues with the glue , average thickness, good price, would purchase again.Recommend

I have just completed glueing 1600 LED's to a sheet of plastic using this quick-set glue.Having used another brand of similar glue for 1200 of them, I ran short and was able to get this brand to me quicker to finish off the other 400 LED'sI am very impressed with UNIKA MitreBond Superglue & Aerosol Activator.The bottle shape is far better for control. The top lid incorporates a pin to keep the hole free. The inner top section is screwed to the bottle (not just a push fit), so if the lid did get stuck to it, you can separate the two parts more easily.It seemed faster setting to me than the other brand, so I was working more efficiently, and to end it all, the smell of the spray it slightly better than the other type used, and after installing 1600 LEDs, that makes a difference :-)

Good glue system. The activator spay makes the gluing better to set. Just you got to be fast to hold the two parts being glued in place as the setting is fast, it is under 10 seconds.I would recommend it to anyone needing a fast strong glue.

It makes such a difference having the spray as well as the glue. Easy to use. Not too thick. But not overly runny.

If tou want something to stay stuck. No question on that! Worth the money. So impressed with what its fixed and stayed fixed!