SPARIN 2 Screen Protector for iPad A16 /10th Gen 2025/2022, [11’’/10.9’’]

I’m really happy with this screen protector. It fits the 13-inch iPad Air perfectly and was pretty easy to put on. It lined up nicely, went on smoothly, and I didn’t have to spend forever trying to get bubbles out. Once it’s on, the screen still looks clear and the touch sensitivity feels the same. It also doesn’t make the iPad screen feel bulky or take away from the display. Definitely worth putting on a new iPad right away for some extra protection.

This is an updated review of this product. The vendor contacted me shortly after I posted my initial review of the product. I honestly didn't care that much since the cost was minimal. First of all, I must say that I was very impressed with the way they stood behind their product and their persistent effort to satisfy their customer. They actually took the time and effort of attempting multiple shipments of the replacement product to me. The first failed shipment was due to a quirk in the Amazon shipment not being able to be deliver to my regular Amazon locker. I don't fault the vendor for this. They then made another attempt to ship to my home. Secondly, upon arrival, the end result was a flawless install as shown on the attached picture. I'll be honest. It took a little extra effort and patience to align & install the replacement screen protector. I followed the instructions once again using all of the provided wipes and clothes, but dust removal proved to be the biggest challenge. This time the alignment tape had more adhesion to it and it did not come loose during the application of the screen protector. Again, the product pretty much adheres to the iPad on it own and I just had to smooth away the air bubbles towards the nearest edge and they disappeared. Installation tips: 1.) DO press the guide tape firmly onto the iPad back to ensure a strong installation hinge 2.) DO NOT mimic the installation video. Instead, place the 3 guide stickers along the 'longer' side of the iPad 3.) DO follow the cleaning instruction video 4.) DO really take the time to remove the dust from the iPad screen (press and peel off the dust absorber tape, don't dab) I updated my original rating from 3 star to a 5 star. I think that the product itself is a 4 star (it takes some extra effort to install and it's a fingerprint magnet, but wipes easily), but it is worth buying. The 5th star is really for the customer service. I wouldn't hesitate to buy another product from this vendor and I would feel comfortable recommending them to others. ORIGINAL REVIEW - 3 Star I read the installation document and also watched the installation on YouTube. The results were mixed. Pros - Both the supplied installation document and online instructions were clear - The screen adhesion works really well on the main body of the screen - It's easy to push the air bubbles outward and it actually did most of the work on its own - The screen is crystal clear Cons - The supplied installation guide tapes have poor adhesion. One of the guides came loose after I had already removed the plastic screen cover as I was flipping the glass screen protector onto the iPad. Of course, this set off a chain of events as I tried to realign the screen protector with the one remaining guide tape which resulted in a slightly misaligned installation. - This extra maneuvering resulted in some small dust particles to settle on the screen, but there is no troubleshooting information on the installation document or video on how to cleanly lift the attached protector and remove the dust. I eventually managed to get under the protector and use the dust lifting tape to remove the dust particles. - I was finally able to complete the installation, but there is one corner that won't adhere to the iPad screen regardless of how much I try to press down on that corner. Luckily, I also bought a silicon case that has a lip that envelopes the perimeter of the iPad. This helps to keep that section of the screen protector down, but only time will tell how long this protector will continue to adhere cleanly to the iPad.

Pretty good product, easy enough to install it and fit perfectly, for the price I can’t complain, looks pretty good and doesn’t distort the screen also it silky smooth so feels really nice

the quality of these screen protectors is really good for the price. the glass feels smooth and clear, and it doesn’t noticeably affect the screen quality or touch sensitivity. installation was also really easy, especially with the included guide stickers. they made it simple to line everything up properly without getting the protector crooked. overall, i’m really happy with these and would definitely recommend them if you need a screen protector for an iPad A16/10th generation.

This screen protector fits my iPad Air 11‑inch perfectly. Easy to install with no bubbles. The touch sensitivity works great. Very good value for a pack of two. Highly recommend.

The installation of the screen protector was easy after trial and error. Glad it was a second screen included. I had to learn my new iPad Air m4 13 inch screen. The cut out in the screen protector is so you don’t obstruct the on screen microphone. So be careful when installing. The tablet is designed horizontal view.

Finally a screen protector with the notch cut out so the FaceTime camera and sensors WORK! Will buy again for sure, as my kids crack screens all the time 🤔🤣👍✅

UPDATED - I ordered second set of SPARIN screen protector and was successful in installing. Original review below, followed by updates (what I did differently). The reason the kit contains two protectors is to provide you a second chance in case the first one goes awry. In my case, both installation attempts went awry. I viewed the instructional video three times and had it memorized. For the time being, I am abandoning the idea of a screen protector for my iPad Air. To help future purchasers, here are the problems I encountered. The "guide stickers" don't adhere to the surface of the protector very tightly. After I had peeled off the protective film from the glass, and was turning the protector over to stick to the front of the iPad, one of the guide stickers came loose from the glass. If this happens, you are forced to align the protector over the screen by eye. Actually, that is not too difficult, so I completed the application of the protector. There were a few bubbles, which I was able to eliminate, all except for one bubble. The remaining bubble was caused by a speck of dust or something. At this point, I peeled off the first protector and proceeded to attempt installation of the backup protector in the kit. While installing the second protector, I took extra care not to put any strain on the guide stickers as adhered to the screen protector. Unfortunately, after installation of the backup glass protector, several bubbles remained which were caused by tiny fibers. Whether from the air or the microfiber cleaning cloth, the effect was the same: installation failure. The lesson here is to use the provided "dust-absorber" sticker very aggressively as shown in the video. It is not sufficient to inspect the iPad's screen surface by eye alone. These SPARIN screen protector kits are relatively inexpensive, so at some point I'll probably buy some more kits and try again. UPDATE - I ordered a second set and this time took stringent dust mitigation measures, including: - Carefully vacuumed the room's hardwood floor for dust accumulation - Cleaned desktop thoroughly and moved non-essential items away - Placed a portable work light to shine horizontally across surface of iPad's screen - I tested that this highlighted any and all dust particles - Ran HEPA air purifier in the closed room for an hour before attempting installation (also blocked the heating vent) - After setup (with the three "hinges"), used dust-absorber over and over until it looked like the dust was taking a pause - Quickly ripped off the protector's cover sheet and smartly swung the protector over on top of the iPad screen - Following the horizontal swipe in the middle of the screen, then protector adhered perfectly, just like in the video No bubbles, no hassle. The trick is familiarity with the procedure and absolute dust control.

Super par contre c'est fissuré sans raison un soir que je regardais une serie..doit y avoir un esprit maléfique qui n'aime pas les verres tremper chez moi...

Ich habe die Schutzfolien für mein iPad 11 (A16) gekauft und bin positiv überrascht. Die Passform ist exakt, alle Aussparungen sitzen dort, wo sie sollen, und die Folie bedeckt den Bildschirm sauber, ohne an den Rändern zu stören. Das Anbringen hat mit der beiliegenden Anleitung gut funktioniert. Ein kleiner Staubkorn ist natürlich immer der größte Gegner, aber wenn man sich kurz Zeit nimmt, lässt sich die Folie nahezu blasenfrei aufbringen. Dass gleich zwei Folien im Lieferumfang enthalten sind, nimmt außerdem den Druck, beim ersten Versuch alles perfekt machen zu müssen. Die Touch-Bedienung fühlt sich praktisch genauso an wie ohne Folie. Farben und Schärfe bleiben erhalten und der Bildschirm reagiert weiterhin zuverlässig. Fingerabdrücke lassen sich auch deutlich einfacher wegwischen als erwartet. Nach einigen Tagen im täglichen Gebrauch sind bisher keine Kratzer oder Ablösungen zu sehen. Für den Preis bekommt man eine hochwertige Schutzfolie, die ihren Zweck erfüllt. Ich würde sie wieder kaufen.

Rien à dire, kit complet pour la pose, c’est ok

Easy installation send fits great

Absolutely love this product. Did not have to do much. Great price for such a wonderful product! Fast delivery. Very happy with the purchase. Bubble free!!! Sealed itself to my iPad!! 100% recommend! 👏👏👏