LILYGO T-Embed ESP32-S3 IOT Embedded Panel for Programmable Development Board with 1.9-inch IPS Color TFT LCD TTGO Wireless Module

Matériel très intéressant mais aucune documentation ni support sur le site un petit effort serait apprécié

The T-embed board is pretty neat, and it packs a lot power and peripherals into a small package. The LCD display is crisp and bright. The rotary encoder works, but the dial is fairly shallow so the feel is just OK. You get on-board microphones, header pins, plug-in speaker and battery connector in the handy plastic packing box. I haven’t used the header pins yet and it looks like it would be a pain to install them because you’d have to remove the front panel to get to the solder pads. The board has built-in circuitry for managing charging of a user-supplied LiPO battery. I haven’t tried the Bluetooth yet, but the on-board Wi-Fi has decent strength and sensitivity, and is easy to use. You get expected analog and digital I/O pins. I used some of Volos Projects’ GitHub example code to get started working in the Arduino IDE. Lilygo has a GitHub page with Arduino LVGL libraries and IDE processor plug-in modules for the T-embed. Oddly, the best choice of board is ESP32S3 Dev even though there is a choice for T-embed. I found sketches didn’t compile correctly unless I used ESP32S3 Dev as the board selection. The T-embed has the LCD connected by SPI, not parallel. If you’ve used other Lilygo boards, you need to reconfigure LVGL for SPI or you’ll get just a blank display when you run your sketches. I just keep two separate Arduino folders with LVGL configured appropriately are switch them back and forth depending on target board type. There may be a better strategy, but that was a quick solution. Over-all the T-embed is a really cool small board that pretty much gives you everything you need to learn ESP32 and to make really interesting projects without needing to add a bunch of parts. The nice front panel makes it easy to cut an opening into a project box, snap in the T-embed and have a professional looking result. This review is based on my experience having purchased the product without outside influence.

bonjour , ce qui me fou un peu en "rogne" , regardez :Liste de livraison（Les piles ne sont pas incluses dans la liste） 1 X T-embed 1 X IDC3 Box Header Connector 2.54 (2*4P) 1 X 1511 Haut-parleur (80 1W) 1 X Câble de batterie [JST 2pin 1.5mm] (non present ...grrr) 1 X Câble d'en-tête de boîte 2.54 8 broches 10cm , et pour trouver ce type de connecteur sa cour pas les rues. Sinon le produit est conforme ,mais pas du coter nomade ... dommage.

Only works when plugged in doesnt come with a back. I was highly disappointed

Le produit est livré sans coque 😱