Pulsar Gaming Gears SUPERGRIP Pre-Cut 1 Universal Griptape Pre-Laminated Sweat Absorbing High Performance Universal Anti Slip Mouse Grip Tape Ultra-Thin 0.5mm (0.02in)

this grip tape is really really nice. the uncut sheet does require a little more effort given you have to cut it, but i found covering each section with masking tape and tracing the area with a pen works, just make sure to avoid too much curvature in one piece (or add little slits to relieve the tension) or it won't sit right. (that being said, if you bought precut grip tape from another company and realized that the material is so bad it makes the mouse harder to hold, you can use that as a template cough cough glorious model o grip tape it's so bad) but the material is really nice. i've only used the same tape for one year at a time, as by that point the mouse i put it on started to have some issues, and even when it's that old it still makes it easier to use the mouse for long periods of time. i can maneuver the mouse with my fingertips with no issue, and it's not super hard to clean. the adhesive is a bit strong, it's not impossible to take off, especially if you use isopropyl to help weaken the adhesive when removing. this does mean it's hard to reuse, so if you're not set on a specific mouse yet, you might need to buy enough to put it on multiple mice. that being said, the only reason i bought a whole sheet is because i'm used to a mouse that has the annoying holes in the shell and i wanted to cover up the holes, otherwise the precut pieces are perfectly sufficient. you really just need to put tape over the parts of the mouse you touch with your fingers/palm, and the provided pieces are definitely able to do that, although you might need to trim them up a little bit. even still, it's very easy and i'd say it's worthwhile

I used this on my cell phone case to add more grip, so my phone wouldn't slip through my fingers and drop. This stuff works perfectly!!! If you have arthritis in your hands and have trouble with grip......problem solved. This stuff comes in a single sheet so you can cut to whatever size/shape you need, and it is thin, super easy to apply, very grippy and feels so comfortable to the touch. You can find numerous other uses for this stuff. GREAT product!!!

UPDATE! (as of 4/10/2025, 1 year and 4 months) It’s still running good! It did start slipping a few months ago but that’s due to gripping way too hard. Just make sure to not grip hard since it will start slipping but that’s the case with every grip. Regardless, it doesn’t pick up fur or anything! Easy to clean and the grip is still there 👍 First off, I’ve been a huge LizardGrips fan for about 2-3 years. I would replace my grips once a year or at least until it’s starting to slip away. (I recommend every 6 months) I also game heavily and sweat. So I decided, to try a new brand this time. I heard of Pulsar when my friend mentioned a mousepad she wants and I noticed that Pulsar sells grips! And based off the reviews and what I’ve seen- one thing stood out to me. It gets grippier the more you use it. And this is what LizardGrips struggled with. In the second picture I’ve attached, that’s Pulsar vs LizardGrips in terms of texture. Pulsar is a LOT more thin & smaller. So make sure you get enough for your mouse if it’s bigger or if you know you’ll make mistakes. 1 sheet is enough for just 1 mouse, maybe a bit more space for one cutout. Overall, ever since I bought them, I haven’t ran into any issues. I’ll be updating in the future (6 months maybe?) to see if any fur or anything has stuck to the grip and if it gets less grippier. Review last picture to see the difference between both grips! Texture is smooth and thin. Barely feels like it’s there. Easy to get used to as well. Make sure to use an xacto knife or a good quality hand knife like mine. I recommend using painter’s tape to trace the outline on the mouse first (clean it with alcohol and take it apart to fully clean it out as well if any debris) Then place the painter’s tape on top of the sheet (it doesn’t leave any residue) and cut it slowly and make sure to rotate with your hand with the cutting mat. And you’ll be good :) Have fun! I’ve tried multiple grip brands and this is definitely the best I’ve tried 👍

Its very grippy and nice to touch. I like it. Makes so much difference i feel so much more control on my mouse. I also want to use it on other things too like pens. The uncut one is pretty easy to work with.

Added much needed grip to my Swiftpoint Z2 mouse. It has integrated grip pads but they are more slippy than grippy. This mouse is not only heavy as a tank, it can read tilt input, so to maximize that, I wanted to eliminate as much slippage from lifting as possible. I started off with only a couple on the LMB and RMB, but soon added ones to pretty much anywhere my hand made contact with the mouse. They are, at least within the first few minutes, removeable to adjust placement. I lost two stickers to wrinkles, but that was my own fault. I had some grip tape on a Razer mouse that had a weird dry feel to them that I wasn't really a fan of and I was happy to find that these don't have that weird texture. They do collect dust pretty well, but for me that's worth the price of entry. I also added squares to the lower cardinals of my little Space Mouse puck and that has been awesome as well. The squares, circles, and pill shapes were my favorite. I used one hexagon (which I found to be a bit small to be of any use on their own) only because I ran out of the other ones. Big fan. Looking for an excuse to buy more.

I recently had a chance to try Pulsar Gaming Gears SUPERGRIP and I must say it impressed me in many ways. As an avid gamer, I understand how important it is to have high-quality gaming gear that improves both performance and comfort. SUPERGRIP certainly works on those fronts. First of all, the build quality of the SUPERGRIP is exceptional. It has a sturdy construction with a combination of durable materials that feels premium to the touch. The ergonomic design fits comfortably in my hand, providing excellent grip and reducing fatigue during extended gaming sessions. The textured surface adds an extra level of control, ensuring my hand stays steady even during intense play. Especially with the un cut you can customize it for any mouse and you get way more tape. This level of flexibility is important to optimize my gaming experience and gain a competitive edge. I have tried lizard skin and also btl grip but both feel a little gross compared to this product. 10/10

I love these grips. Best I’ve found by far. I bought them for my headphones, now I have them on my wallet, phone, tv remote, and my daughter’s tablet. Basically anything that could benefit from better grip, is slippery/hard to hold onto, even the grip of my Glock, I put these on all of it. I really like the large ‘cut to size’ option as well. I really love these for just about everything. The quality and especially the feel in your hand is sooo nice.

While I love the hand position and pinky rest of the Keychron M5, I needed a solution to the mouse's slick plastic shell as it makes it pretty tough to lift/reposition. I was gonna try hockey grip tape when I came across Pulsar's Supergrip. I used masking tape to map out a couple of key grip areas under my thumb and pinky (and on the left mouse button cuz there was more than enough material) and then used those as a template to cut the Supergrip to the proper dimensions. After measuring twice and cutting once, applying was pretty easy as I was able to reposition the Supergrip a couple of times without issue. While I can't speak to the sweat absorption (I'm more Figma than FPS), the material is very comfortable and grippy enough for its intended use. I would definitely buy this stuff again.