Air Blower Seal One Way Non Return Smart Valve for Coleman Lay-Z-Spa, Repair Hot Tub Water Leakage

This part fixed our problem with our inflatable hot tub. It was exactly what we expected.

Great replacement for original that dry rotted and broke Easy to install Good value Perfect fit Doesn’t leak Quiet

It fits nicely. Yes the O-rings will come out a little during installation, this is normal in most cases. Gently press them into place as you push the piece in. Wetting inside the pipe and the the piece will make it easier. I filled the tub to the max level line. It leaked to the minimum level line. The backlog device, the rubber stop, need to settle a bit. I have lost no water since. This rubber, so far is much better than the original vinyl one that came with the tub. Vinyl? Seriously?

Works great fix the hot tub

Does not work well enough to stop leaking. Drips ever so slightly. Also there are no instructions so assuming I installed it correctly, it’s faulty.

Quality as promised! Worked well!

This instantly resolved my leaking air-blower plumbing on my Coleman Saluspa. The stock check valve began to fail and a worsening leak was forming at the flange coupling between the tub and the pump unit. I left the original leaking check valve untouched in place, and have not observed resistance or reduction in airflow by having two check valves in-line with each other. After several weeks of use, I wouldn't plan to ever touch or attempt to remove the original (a real pain to reach). When first attempting to install this check valve, I noticed a tendency for the 2x silicone O-rings to want to extrude out of their grooves. To eliminate this, I used a sharp exacto blade to easily carve a small chamfer on the inside of the hot tub plumbing, and then used my finger to wipe a very light film of wax around the valve to lubricate both O-rings. The lubricating wax was more helpful than the chamfer, and the valve slid into place like butter. An invisible film is all that's needed. After several weeks of use, the joint is leak-tight without a single drop of water. A fantastic aftermarket solution to an otherwise impossible-to-access stock valve.

I took a risk and ordered this for my Saluspa Grenada hot tub by Bestway. It fit just fine and works great. The extra circular rubber gasket they send did NOT fit perfectly, but I still had my original one.

Works perfectly. Before I found/purchased this product I had contemplated a number of “Mickey Mouse” solutions - some kind of worked. This product requires no opening of the motor assembly and fits good and tight. Had to tap it in easily with a rubber hammer.

Easily fixed my inflatable hottest!

Similar to some others. Installation was straightforward. Valve and seal fit perfectly. Came home the next day after refilling and letting the tub heat up to find the pump in a pool of water. Opened the blower line back up to have water pour out of the pump and watch a slow dripping leak from the tub.

Fait très bien la job. Seul petit bémol, le joint de caoutchouc fait un bruit de vibration un peu agaçant c'est la raison du 4 étoiles sinon il fonctionne très bien. !

Fixed the problem I had