S880 NVMe SSD 1TB, PCIe 4.0 M.2 2280 Gaming SSD, Seq. Read Speeds UP to 7300MB/s, Internal Solid State Drive for PS5 Enthusiasts, High End Computing, Gaming

I recently upgraded to the Fanxiang S880 NVMe SSD (1TB), and I’m thoroughly impressed. Right out of the box, installation was a breeze—recognized instantly by my system, and I was up and running.The speed is good... with read/write speeds consistently hitting advertised marks, my boot times, game load times, and file transfers have all drastically improved. This SSD has seriously breathed new life into my PC.Thermals are also well-managed. Even under sustained workloads, it stays cool and stable with no noticeable throttling. Whether you’re gaming, editing, or multitasking, this drive keeps up with ease.For the price, the performance-to-cost ratio is outstanding. If you're looking for a high-speed, high-capacity SSD without breaking the bank, the Fanxiang S880 is a no-brainer. I highly recommend it!

Using it for my PlayStation 5 internal memory, and so far since I bought it since I first got my system, and no issues, writes and reads quickly and easily.

I like that it was easy to install and had the screw included and is very fast with a decent amount of storage for the price I paid. It also doubled my console storage allowing me to have more games downloaded to my console so I don't have to delete stuff off and then re download a game. and I've noticed an increase in loading speeds which is awesome. It's pretty durable as I've had it for a couple of months now with 0 issues. Altogether I highly recommend this this product to anyone thinking of purchasing an internal m2 ssd for any of their devices that can use it, I personally am using it with my playstation 5 and have been thrilled with the performance. I even tell my coworkers about it when they complain about not having enough storage on their playstation 5's. Temperature stays at a decent level haven't had any over heating issues with it either. I'd like to give a shout out for fanxiang for having a top of the line product for a great price point

I have had this for almost a month now no issues works great and the best part I did not have to put a heatsink on it. I have a lot more storage on my PS5 know for more games. Oh and it’s fast on my load times too. The price is way better than the other brands too.

Two years ago, Aug 2023 $199, and two years later its $250 in worth. It has been running SUPERB on a gaming machine I leave on most of the time. I have been very pleased with this and would buy again except for the STUPID TARRIFS by some orange guy.

They used to say chinese brands didn't make good quality products, that they were cheap, that may have been true but MANY YEARS AGO! This m.2 whips butts badly. it's fast, doesn't get too hot, it's just fast as balls man.

These comments were written in July 2023 and apply to the4TB S880 NVME drive purchased from LDCEMS and shipped from Amazon.The 4TB drive is single-sided. The drive has a Maxio MAP1602A controllerand YMTC 232L (X3-9070) TLC NAND running, presumably, at 2400 MT/s.CrystalDiskInfo shows that the device standard is NVME 2.0.CrystalDiskMark 8.0.4 x64 reports:SEQ1M Q8T1: 7125.57 MB/s (r), 6511.03 MB/s (w)SEQ128K Q32T1: 7117.04 MB/s (r), 6460.51 MB/s (w)RND4K Q32T16: 3816.99 MB/s (r), 4208.21 MB/s (w)RND4K Q1T1: 73.99 MB/s (r), 334.87 MB/s (w)The sustained write speed was approximately 1.8 GB/s until the drivegot to about 45% full, at which point the write speed dropped toapproximately 0.8 GB/s until the drive was full.The temperature according to CrystalDiskInfo always remainsbelow a cool 49 degrees Centigrade, even under sustained writesthat filled up the drive. This was using a motherboard heatsink.No throttling was observed.Maxio NVME SSD fid v0.33a says:v0.33aOS: 10.0 build 22621Drive : 7(NVME)Scsi : 8Driver : W10Model : Fanxiang S880 4TBFw : SN12237HMB : 40960 - 40960 KB (Enabled, 40 M)Size : 3815447 MB [4000.8 GB]LBA Size: 512AdminCmd: 0x00 0x01 0x02 0x04 0x05 0x06 0x08 0x090x0A 0x0C 0x10 0x11 0x14 0x80 0x81 0x820x84 0xC1 0xC2 0xC5 0xC6 0xFCI/O Cmd : 0x00 0x01 0x02 0x04 0x05 0x08 0x09 0x80Firmware id string[0C0] : MKSSD_101000000122373100,May 22 2023,14:26:20,MAP1602,1SSYBB5CProject id string[080] : r:/Congming_Hao/MAP1602-X3-9070-4T-SN11853-Base-SN12237Controller : MAP1602NAND string : CYAxxTE1B1xC3BList may not be completeCh0CE0: 0x9b,0xc6,0x59,0x71,0x30,0x0,0x0 - YMTC 3dv4 TLC 16k 2048Gb/CE 1024Gb/dieCh1CE0: 0x9b,0xc6,0x59,0x71,0x30,0x0,0x0 - YMTC 3dv4 TLC 16k 2048Gb/CE 1024Gb/dieCh2CE0: 0x9b,0xc6,0x59,0x71,0x30,0x0,0x0 - YMTC 3dv4 TLC 16k 2048Gb/CE 1024Gb/dieCh3CE0: 0x9b,0xc6,0x59,0x71,0x30,0x0,0x0 - YMTC 3dv4 TLC 16k 2048Gb/CE 1024Gb/dieApparently, Maxio fid v0.33a does not know the full interpretation of these bytes,which seems to be:0x9b,0xc6,0x59,0x71,0x30,0x0,0x0,0x0 -YMTC 3dv4-232L(X3-9070) TLC 16k 2048Gb/CE 1024Gb/die 6Plane/die>

I purchased this SSD June 6th 2024 and within 6 months of light use, it basically exploded. I was editing a photo in lightroom classic when the unit unexpectedly ejected from my computer. When i grabbed the enclosure it was so hot that I couldn't pick it up and had to wait for it to cool down. When opening the enclosure, I found thermal paste everywhere and it appears as if this m.2 heat up so much it nearly melted. I contacted their customer service via email on December 28th and have yet to receive a response. I also forwarded the email to a representative in the US market and will update this when I receive a response. I'd like to continue to purchase their products and hope this was a defective unit and not a representation of the quality of their products.