ZENY Mobile Laptop Stand Overbed Table Rolling Desk Cart | Adjustable Sit-Stand Laptop Computer Desk, Bedside Standing Desk, Height Adjutable 24'' To 35''

Easy to assemble if you follow the instructions in the box. Contrary to other reviews that said the table was loose was likely due to them not following the instructions. When put together correctly is very sturdy. I have no issues with it and have been using it for a couple of weeks now. Word of warning it is top heavy Don't be jiggling it around with your laptop or tablet on it. But otherwise it works perfectly for the reasons that one would buy it for.

Summary: Versatile, does the job, doesn't look hideous.Pros:Arrived promptly, ahead of schedule.Easy to put together. All pieces labeled with numbers. Instructions very clear. The necessary tools (an Allen wrench and a two-sized wrench) also included.Big enough for a laptop and a portable external monitor (mine is 15.6").Table swivels around on its base as you wish, yet stays put, and adjusts to heights perfect for working from your couch.Wheels work fine for me. Table is level for me.Cons:I haven't yet been able to use the table (EDIT-- replacement part sent at initiative of Seller, which solved most issues described, and now the table is 9/10. The replacement part (the base of the table, the biggest part there was, arrived quickly.).1. one of the metal stays on main height adjustment knobs jutted out at odd angle from the metal pole it is supposed to be fastened to, so one height-adjustment knob only goes in crooked (see photo) (EDIT -- replacement table base sent, and maching was 10/10);2. Directions indicate to screw wheels in with a spanner (the provided wrench), but there is nowhere to screw them into on the foot of the table (see photo). (EDIT -- the screw bases had not been installed. Replacement table base sent by Seller at his initiative fixed this problem. See Photo #3).So, no real cons. That said, other points you may want to consider:(a) to fold for storage (as shown), you will need to remove a screw-washer-wingnut mechanism and find some place to store that until you want the table out again. (The swivel mechanisms under the table which you use to change table angle have little plastic hooks on them. I hung my table tools in one of the small ziplocs the parts came in, for easy access when i want to fold the table down to flat for storage under the couch.)(b) the two screws steadying the main metal tube supporting the table, on either side of the support bar, don't screw into the support bar -- there is no hole for them to screw into -- you just screw them down onto the bar, and that pressure is what holds the bar tight. These need to be tightly tight to achieve a level tabletop. I can imagine they will need periodic retightening to keep the table level. EDIT -- now that the table works, I was able to set up my laptop (with the laptop part of the table at an angle, and it holds) and to put my second screen on the mousepad part of the table. It is all holding in place a-okay so far.)(c) to adjust table height, you will need to unscrew two knobs and then hold tabletop in place while re-screwing to desired height. Not convenient but not the end of the world. It isn't difficult.(d) Seller keeps half the price of the table when/if you return it, since shipping cost almost as much as the table was priced (and these two costs together equal price of comparable tables online). (I now see same table on other websites, with free shipping and total cost equal to table+shipping cost on this platform. if you want to take a chance on this table, that's probably a more protective way for a consumer to go.) On Amazon, request to return automatically approved, and cost of return shipping, at least, is on the seller/Amazon.e) Table is laminated particle board. laptop holder board are plastic screw on stays. They work, they do the job, but know what you are buying.) I screwed in tightly the holds for the swivel mechanism on the table, and one screw created a slight bubble on the top of the table, you can feel it, and you can see it when the light hits the table. That said, it isn't deep enough that it affects how my laptop sits on the table.f) If you are left handed and use an external mouse, you are a bit out of luck, since the "bumpers" for the laptop can only be screwed in on one side of the table. Your mousepad will always be on the right, unless you have both tables at the same angle, and then you could use brace on the mousepad part of the table to hold your laptop).g) I am left-handed and do not use an external mouse. For me the mousepad part of the table is the perfect place for my external monitor (Arzopa (I got it on Amazon); it stands on the foldout of its magnetized screen cover). (I screwed the "bumper" for the mousepad table on under the table, to create a fully flat surface on the mousepad table.)

I got this to use mainly in our fifth-wheel, so I can use my laptop to write when we're camping. I need something that will work whether I'm in the recliner or on the couch, and I think this will do the job. It was pretty easy to put together - all the pieces were there - and it swivels so the top can be parallel or at right angles to the base. The mouse pad area tilts separately so it can be flat even if the big part is slanted. The screws ~do~ need to be tightened hard or it will wobble and lean a bit (hence the 4 stars for sturdiness), but that can be done. If one were changing the height frequently, it might be a bother, but being able to turn the desk part makes it worth it to me.

Had to get a refund on this product. No good. Holes not cut threw. Was poorly made real wobbly.top part of this tray was slippery. Everything slipped off. Sharp edges

This was the first thing that I put together - is nice and sturdy.. good buy!

I am still using this thing however it is designed VERY poorly. I had a similar table when I lived back in Michigan, and although it did have it's flaws, it was definitely more functional than this thing.It topples over sometimes even when it's lined up as in the photo (and no my laptop is not heavy). It doesn't like to stay adjusted (the height falls down because the design they used to tighten the rode in place is poorly designed and the screws barley touch the inside pole making it slide out of place). There were also supposed to be two more holes in the pole that supports the tray; however they seemed to have forgot to drill them.Overall I am not satisfied and I wouldn't have bought it if I would have known.

Flimsy. Doesn't like to stay in the position you lock It in. Will be lopsided. Doesn't adjust correctly. While using it will all of a sudden drop down or the desk top will till full forward and laptop falls off. Or whatever is on top.

Very Sturdy and I really like the way you can adjust the height and tilting the table up and down.

なんと言っても、作業効率があかった。動画編集でも音楽制作でもスキマ時間を活用して出来るようになった。ストッパーがかなり硬く締めなければ押さえると沈むがご愛嬌である。

組み立て完了し　出来上がりに満足してます最初はキャスターの1つが破損してましたがアマゾン経由で出品者さんに連絡をとり新しいキャスターを送ってもらいました迅速な対応で不安もなくキャスター来るのを待ち　連絡から２日後にキャスターがきました　次の日組み立てて概ね思ったとおりの製品で満足です「概ね」の理由は写真の通りテーブルがすこ〜し右斜に傾いてる？（こういった仕様なのかな？）原因は台を支えるシャフトのネジが左はしっかり締まるけど右はどうしても浮いてしまうためだと…こういった仕様だとしたらすみません私は気にしないのですが　もし気になる方がいましたら参考までに

乗せ板の固定にちからがいる？マウスの部分は強く締めてもうごく

説明書は④からしかない①から③どこいった？どれだけ探してもない天板はボロボロ(写真添付板の分かれ目のクオリティヤバい(写真添付固定用のネジ穴が空いていない箇所がありネジが浮く(写真添付固定用のネジが開いてない箇所は自力貫通させた方が良い無段階調節、聞こえはいいけどただネジでパイプに無理やり固定してるだけこれで5000円台は高い2000円クオリティ

在宅ワーク用に、たまに姿勢を変えて作業できるように購入。この値段で、注文してから２日で届いて、組み立て三十分！早速使ってますが、立って使ったり、ソファで使ったり、場所移動して、PCの角度が変えられるのは予想以上に便利！写真のように角度調整は手でねじ止めするタイプなので、荷重かけると回っちゃいますが、気をつければいいこと。高さ調整もねじ式ですが頻繁に変えないので問題なし。いい買い物した！