PC CASE ATX 6 PWM ARGB Fans Pre-Installed, Type-C Mid Tower Computer Case with Full-View Dual Tempered Glass, Gaming PC Case,Black(K2)

Overall, I was very pleased with my purchase of the MUSETEX ATX PC case. The build quality is solid, and the value you get with 7 pre-installed PWM ARGB fans is excellent. Right out of the box, the fans were properly aligned for optimal heat dissipation, making airflow setup stress-free and effective. Cooling performance has been great, and the system stays cool even under load. The case looks fantastic, with a clean and modern design highlighted by the tempered glass panel. Once assembled, everything feels sturdy and well thought out from a performance and layout standpoint. The built-in dust filters are another strong point. The bottom filters are solid pieces held securely in rivet-like channels, while the top dust cover is magnetic, easy to remove, and holds firmly in place. The USB 3.0 ports are controlled by a single plug and perform at expected speeds without issue. The pre-installed power, reset, and HDD LED connectors were a nice touch and saved time during setup. I also appreciated the pre-installed Velcro-style cable ties, combined with multiple rear access points, which made cable management much easier and cleaner. The only real downside is the documentation. The instruction pamphlet was printed on very thin paper that tore easily, with small text that was difficult to read. Accessing the documentation while working inside the case was inconvenient, and the tempered glass panel removal was confusing at first. Since the glass appears to be magnetically held, clearer instructions—such as external diagrams or simple directional stickers—would greatly improve the user experience. Pros: Excellent cooling with 7 pre-installed PWM ARGB fans Fans correctly oriented for efficient heat dissipation Secure dust filters and thoughtful design features Clean aesthetics and solid build quality Great overall value Cons: Poor instruction quality (thin paper, small text) Documentation difficult to reference during installation Glass panel removal needs clearer guidance Despite the documentation issues, this is still a great case with strong performance, cooling, and aesthetics. If MUSETEX improves the instructions and paper quality, this would easily be a near-perfect product. Note: The included video I submitted does not show the side tempered glass installed or final cable management.

Although I’m ashamed to admit it took me quite long to assemble everything, I will say that this case and the six included RGB fans are amazing and work great. They run quiet and everything inside the PC is nice and cool. The tempered glass is very durable and looks so good once you peel the satisfying plastic layer off (don’t leave fingerprints!!!). The included screws and manual help with installing and wiring the fans, and the wiring is mostly neat and already tucked away for you, all you have to do is hook it up to your motherboard! I could be biased because I got this case for $38 after using a coupon and a gift card but still for its base price I would hands down buy this again for my next build if I were to switch cases.. but I will probably stick with this one for quite some time because it looks so good. P.S. For those who are new like me and are concerned about compatibility, this case and a few of the other cases from MUSETEX are available to select on pcpartpicker.com and will make the build process so much easier!

This is a very nice case! i love building computers and the ease of moving my old pc over to this new case was amazing! there is so much space and i love all the glass and the amount of fans you could have in here! its very light compared to most full towers and the style of it is very modern! i am very happy with this case!

I dont usually write reviews, but this case deserves one. 10-10 I recently upgraded my old stgaubron pc, all i was using was the case. That became an issue with the wires being everywhere, and i needed a bigger case. this one was PERFECT. Came with the fans complete and put together nicely, Installation was really easy, It doesn't overheat anymore as well. My old case was too small for my big ahh heat sink and this one gives it a bit more room for air to circulate around it. overall, strong build, easy to navigate and install stuff in, and really nice in general. def. recommend to anyone buying or upgrading their case.

It's a decent case. I don't have any major issues. I won't discuss too much about what others have already mentioned so I'll just post some details here: The case is very angular, and frankly kind of big. The benefit to the size is that it fits everything pretty well. Cable management: There's a lot of cable management (places for the cables to go and be routed) but you may still struggle find places to route the wires from and AIO or RGB fan cables if you want to add ones that don't come with the case. I wish there were a few more slots towards the bottom and sides of the motherboard for routing cables. Beyond that the front and rear panels comes off and goes on very easily. The "basement" is out of the way and the case showcases your build very well. The motherboard went in, very easily, and all parts are very accessible. This was my first time building a PC (for me) and I think this is a fantastic case for those building a PC for the first time.

This is a very good case! I have never dealt with tempered glass before so I was nervous asf but after installing everything and putting the case back on it was perfect! The airflow is great and keeping everything cool under load! The case looks very nice as showed in the pictures below. The material is sturdy but could be better. Overall this is a great case!

I did not expect much at first from this case, but now that I have it, it is well built and made with a variety of builds in mind and on top of that, aesthetically pleasing. The stock fans are already in the optimum position and orientation for the best air flow. lost of room in the case for anything you can throw at it. Has space for 4 SSDs or 2 of each - SSD/HDD. All of which will be hidden behind the MOBO (x2SSD) and under the case next to the PSU (x2HDD/SSD). The design of the case makes cable management trivial with plenty of tie down points for zip/cable ties. One thing I found interesting was the type C port. The end that connects to the MOBO is a Type E 3.1 which my MOBO does not have a port for, but did have a extra USB 19pin so I just got an adapter. And as far as the english instructions go, you can tell it was a rough translate, but does not take away from being able to assemble it. However, If your MOBO does not support 5v ARGB, I recommend you replace the fans. Even if you get a "adapter", it will not work. All in all, Great case for the money. Are there other cases that provide higher Flow and/or better aesthetics? Most likely, but If you just need a case that looks good and can accommodate your parts, look no further. 5/5, would buy again.

Nice and sleek

This is the prettiest computer case I ever have. I usually only buy full ATX case to accommodate my many HDDs and DVD-ROM. But this year's upgrade made me realize I should leave most of these outdated devices in my old computer and just go for M2 SSD for fastest speed. This case is smaller than my previous case, but it is still able to hold two HDD and two SSD. The point is the looking is far superior than the old one. The RGB lights and the full glasses exterior look fabulous. All six pre-installed fans seem to do a good job to keep the pc cool even when playing games. The USBC connector on the front is fast when pairing with a USB4 cable. I would highly recommend this case to anyone who is upgrading PC and need a functional and great looking case.

I'm writing this review because I was very impressed for the price. This case would be good for AIO builds like shown in the pic, but out of the box isnt perfect. The air flow for traditional dual tower CPU cooler is even less ideal. The fans are actually good quality, daisy chained, and the 2 side fans are reversed fan blade fans, at this price point is amazing (Note: Reversed fans means ugly X-frame is on the opposite side of traditional fans). The problem is i cant find to buy a 3 pack of reversed blade fans to add to the PSU shroud vented bottom, which is shown in pic but empty in case. I know description say 6, but it should say 4 exhaust fans and 2 intake, and have an option to have 3 more intake (reversed fans), totaling 5 intake and 4 exhaust fans . Out of the box fan set up will make it a negative pressure system (vacuum air flow), which means dust accumulation thru all the cracks which is not desirable, you want to control intake air by having a positive air flow, coming only thru the proper air filtered paths. This could be solved by reducing the speeds of the 4 exhaust by approximately half the speed of the intake fans. Or negative pressure by adding more intake fans. Two problems with moving some exhaust fans down on the PSU shroud for intake or adding more rgb fans. First, is that you wont get reversed blade (at a decent price), which means you will see the ugly X-frame, maybe you dont care, but my pickiness about matching the other fans would bug me. The second problem could be more of a deal breaker. If you decide to add 3 bottom intake fans on the PSU shroud, the shroud cavity wasnt well planned to be a space to easily draw air from. Even thou can remove the HDD tray and add a 120mm fan in the "basement", only one is possible and the HDD tray vent doesnt have a filter, and is a rectangle (100-110mm x 50ish mm) instead of a 120mm round grill hole. So thats not good, there wouldndt be enough air flow to supply 3 fans above creating negative pressure basement cavity. Another side note: PSU bottom intake filter (in the basement, is one of those crappy flimsy square cuts in the mesh material without a finished edge types, held in with small side tabs on the case floor, the middle of the edge on all 4 sides, the terrible way to do it holding tabs. No magnet, not frame to pull out. To fix everything for a V2 by the manufacturer stop the shroud short, boxed in to hide PSU cables (no vent holes needed on shroud), add 2 intake fans to case floor for intake, permanently delete the HDD tray from basement, or integrate it on top of PSU shroud. Could have been a 5 star, almost a 4 star, i give it a 3.5 star, but if you like modding you could have that 5 star, maybe!

Sturdy design with tons of space comes with enough fans to consider this beast a jet pack ! Was able to add all my hardware and 2 Xtra fans no problem! Everything screwed in without any threading issues and looks amazing sitting on the desk. Has 2 SSD slots on the back under the case cover for easy installation and access to the SSD and still comes with extra slots for storage. Love this case for the price you can not go wrong.

Really love the case, was super easy to install everything, lots of room to work, great that all the back slots for side mounting the GPU in the back of the case is removable as 1 unit so the GPU can be installed easily (normal way), otherwise you can't seat it on the motherboard. Everything was labelled well, everything works and cable management was a breeze. Came well packaged and was delivered quickly. All 6 fans were argb, I moved the top 3 fans to the bottom and installed the MSI Mag Core 360r (v2) AIO cooler and all lights sync with Asus aura. It's quite a flashy build compared to my last one lol and I'm completely happy with it. Would recommend this case 100%.

Case is what I expected for a budget build. Nice fans, low noise and LEDs are a nice feature. Had to move the pre installed top fans to allow for the AOI cooler install but that was easy enough. The only thing that I have an issue with is the thumb screws that hold the side glass panel in place stripped upon installation. It looks like the standoffs that were installed on the case were defective and you couldn’t thread the thumb screws in properly. Two of the thumb screws broke right off. Not impressed. I just completed another build using a different case from Corsair, should have bought another Corsair. Oh well this case was cheap enough, will use it for now. It does look nice!