PDB XT60 W/BEC 5V & 12V 2oz Copper For RC Helicopter FPV Quadcopter Multicopter Drone Power Distribution Board(Includes XT60 aviation accessories)

Description

Description: The PDB-XT60 distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering cameras, servos, RC receiver, flight controllers, video transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently. General: - Input voltage range (3S-4S LiPo operation): 9 - 18V DC. - Regulated 5 V and 12 V outputs. - LED power indicators (5 V and 12 V outputs). - 6 ESC outputs and 1 pair of VCC/GND pads. ESC outputs: - Continuous current: 25A x 4 or 15A x 6. - Peak current (10 seconds/minute): 30A x 4 or 20A x 6. BEC 5V output: - Designed for RC receivers, flight controllers, OSD, and servos. -DC/DC synchronous buck regulator. - Voltage: 5.0 +/- 0.1 VDC. - Continuous current: 2 amps (max. 2.5 A 10 s/minute). -Output Ripple: 40mV (VIN = 16V, VOut = 5V@2A load) - Short-circuit tolerant (5 seconds/minute). BEC 12V output: - Designed for Video TX or FPV camera with linear regulator. - The battery should be 4S LiPo (13~18V DC). - Voltage: 12.0 +/- 0.3 VDC. - Continuous current: 500mA (Max.0.8A 5s/minute) - Short-circuit tolerant (2 seconds/minute). BEC 12V @ 3S LiPo. - Output voltage= 3S LiPo voltage -1V. Physical: Dimensions: 36 x 50 x 4 mm (without XT60). Mounting: 30.5 x 30.5 mm, diameter 3 mm. Note: Please allow 1-2 cm errors due to manual measurement. Thank you for your understanding. If you have any questions, please contact us by email first, we will help you solve the problem immediately Package includes: 1 x Matek (TM) XT60 PDB. 1 x XT60. Review: 👍👎 - 👍👎 Review: Le prix - Conforme à mes attentes