USB 3.0 Header Splitter Extension Cable,Motherboard USB 3.0 Internal hub Splitter,19/20 Pin 1 to 2 Y Type Cable - DIY Products 5.8 in

The new case had two connections for the USB 3.0 and the board only had one female connection for it. This attached nicely to the two male connections in the case and attached to the board. All of the 3.0 USB connections work well. I would recommend this item for similar situations.

Worked like a champ, good splitter, flexibility was decent. Does exactly what I wanted it to do. Tight fit so no worries about that.

Difficult to rate the product because I had an interesting experience with this. I'll go ahead and rate 5 even though the product gave me un-usable issues. The quality seems just fine Connection fit just fine It does what it says it does. It splits one usb 3.0 header to give you two connections Here was my issue, not the fault of the product by the way. My case supports 4 USB 3.0 ports on the front. I only have one USB header on my Asus bf550 mobo. When I used attached this cable and split the power from my USB header to 4 ports, it caused lots of stuttering and audio glitching in every application I used. Because I made two hardware upgrades and updated to windows 11 at the same time, it took me forever to figure out that the power draw from the header was way too much. Once I removed it my computer worked fine. Some people may be fine doing this, in my case I was not.

I've been looking for a USB 3.0 male motherboard header to two female for a while and everyone I've tried it hasn't worked. Just wanted finally worked. And is actually decent quality it doesn't feel cheap at all. It feels built to price. The connection for all these pretty good but I haven't said it in there permanently with tape to hold stuff in place. Just know when you buy a header like this you aren't gaining an extra part you're sharing one USB 3.0 header with two connectors so each connector is going to get either the full speed if you're using the device or USB ports connected to one side, I haven't tested this for sure. But, there's also accessibility that it might just split the speed in half since you're sharing one connector. But most likely, if you're using something that's connected into one side of the adapter you'll get the full speed, and same with the other side, but if you use both sides at once you're going to be sharing the speed between them. The fit on the male end could be stiffer but is fine.

Needed to split the USB on my motherboard for ARGB controls, this did the trick as expected! Length is good although I was nervous, a bit longer would've been welcomed. Connection/adapater seem solid as well as overall quality; matches nicely with my other black 24pin motherboard power cable. So far its been a month and everything is working well and hopefully stays that way!

No issues, allowed me to expand my 3.+ ports

Works perfect. case came with 4 usb ports connected by 2 cables and I only had one connection. This worked out great.

Update, after 2 weeks this USB 3.0 splitter stopped working... Seems it has some bad connections inside... I would not recommend this product, faulty! This is the first USB 3.0 splitter I have bought to date... I bought two other splitter that were poorly made... The plastic ends cracked and the wire was hard to bend... HOXIBSL makes a well made USB 3.0 splitter, it has good components and is flexible, a necessary element working properly... I would recommend this product to anyone that has a Liam Li Landcool 216 case with the ARGB & USB controller... To use all four USB ports simultaneously, you need a good USB 3.0 splitter, this one is it!

As advertised

Este produto é excelente. Apesar do material plástico parecer um pouco frágil, isso não afeta em nada o funcionamento. Minha maior preocupação era a compatibilidade, pois vi vídeos de adaptadores semelhantes que ficavam frouxos em placas-mãe Gigabyte, chegando a cair. No entanto, com minha placa-mãe ASUS TUF Gaming Z790, o encaixe foi perfeito, permitindo que minhas quatro portas USB frontais (divididas em dois cabos, o que justifica o adaptador) funcionassem impecavelmente. Consegui usar qualquer dispositivo USB e transferir dados para pendrives ou outros armazenamentos sem problemas. Estou extremamente satisfeito e recomendo que o vendedor invista em mais unidades deste produto, pois ele tem um futuro muito promissor no mercado. Super indico!

Bent & missing pins, broken plastic, 3 weeks of patience. £18 for a rubbish quality connector? Its safer if you buy local or buy cheaper.I would give 0 stars if I could.

short and does not fit good in the motherboard usb 3 port but works well

This header splitter is next level no doubt buy this, but this cable should be little bit long,...and take huge time to come to you