Vetroo AL800 Mid Tower ATX PC Computer Case - Door Opening Design Tempered Glass, Adjustable LED Strip, Pre-Installed ARGB & PWM FDB Fan in Rear, Support for 50 Series GPUs - Black

Have you ever wondered what one of the top one percent performing gaming computers looks like? Well wonder no more! I bought this Vetroo case because I wanted a clean looking and cool running case that I could mount an overhead 360mm AIO water cooler (a Vetroo Lurker) in for my Republic of Gamers Z690 Maximus Hero/ Intel 13700K build. And for the price this one was perfect. With a 5.9 Ghz overclock running full time, idle temps are in the mid 20's and I never see more than low 60's in gaming, and mid 70's in the most intense benchmarking. And this is with a 3090 TI Founders Edition (you know how warm these things can run). Case comes with all the screws, standoffs, and typical hardware that quality cases have included,, along with like 5 case fans, 3 of them RGB. Excellent cable management design, and just a high quality feel to it, everything solid, the tempered glass side panel is hinged for quick access, the hinges are high quality. Plenty of room for power supply, mine is a long Corsair HX 1200, and plenty of room for even the largest GPU's out there. This is a mid tower that doesn't cramp anything. It's nice being a one percenter, lol. I highly recommend this case, the price is hella low for this level of quality... which leaves you with more money to spend on ridiculously overpriced GPU's. :-)

So I can’t really just too much about like the airflow but I really love this case and it absolutely is worth the money. I used to originally have a dell optiplex so this is a big upgrade and the noise isn’t loud at all which is neat. Overall it feels very good and I recommend this case to others who are building pcs

It looks really good, the sizes it's pretty big, air flow it's pretty decent you'll just need to get yourself a few more fans, mine only came with one exhaust, the black is really slick and awesome and cable management it's pretty good

Probably should be 4.5 stars, it's a pretty decent case. Bought to modernize my old i7-3770K. I like the magneticly closed door, plus it lifts off the hinges for easy access. The hard drive bay in front of PSU is removable, plus it's adjustable. Has two mounting points, about an inch apart so you can slide it further away from PSU(which I did). Room for cable management. Without HDD bay, there's room for two SSD drives inside the case, next to Mobo. Comes with one fan(pictured outside of case). I installed my own matching fan set. There's no 'controller' for argb, or at least there's no expansion board to plug fans into. My fan set came with its own controller, but I've only used the case's led switch to change colors/patterns. The half(whole) star missing is because the lone case fan doesn't work. It lights up fun, but doesn't spin. Tested on a few Mobo's and they all act the same with this fan, there's a brief rock forward, then nothing, it'll do that until unplugged. Not really a huge loss, but as you can see, it doesn't even have a sticker to cover the hub mount. Photo showing SSD, you'll notice the HDD visible below. This is because I have the HDD cage mounted in the forward position. Can't imagine many folks would leave it in the rearward position if you have a modular PSU, it'd be about impossible to plug in cables while it was installed. Was going to use a Corsair HX 850 PSU, but it's too long to be able to plug cables into and retain drive bay.

It’s a nice case but you need to buy your own front fans. Good for a ITX sized Motherboard, was a bit crowded for me on a ATX card, returned

I needed a new case for my triple fan radiator. My old case was the same size but only fit a 2 fan radiator at the top. I had a choice between this and a perhaps more appealing to a gamer yet likely cheap materials at a higher price due to it's aesthetics pc case. I decided to go with this, and went from a black case to this white for the ambiance effect it has with RGBs. But what won me over was the extra fans. I figured I wanted beauty and performance over sleek faux futurism. I regret nothing! I installed 2 ARGB fans into the extra slots immediately, and replaced the fans underneath the GPU as well. Btw, YES they make a difference! My 2080ti runs noticeably cooler when gaming. They 2 under the gpu, the 3 front, and the 2 extras inside are set to INTAKE. Holy cow do they suck in air. The exhaust fan in the back is blowing cold air when it's running at full. There is only a little heat that comes out of the top radiator. The inside of this case is getting so much fresh air, it's just ice cold all the time. My old case had 3 fans but only had a narrow slot along the front, and on the bottom to draw in air. This case has the whole front panel to draw in air. Then you got fans along the side helping pull more air, as well as the bottom, and your psu also pulling air. THIS BABY IS A VACUUM... without all the loud noise. Downsides. The extra white fans aren't anything to brag about. Also the bottom has screws for 3 fans... However it's impossible to fit a fan in the middle slot with an ATX motherboard. All the case/usb and other wire essentials plug in and stick out. These bulky fans, and my narrower fans both fail to fit. They should have moved the mounting holes just a few millimeters towards the glass and it'd be perfect. Idk how they could have made such a great case. And then fail to notice such a flaw that is so easy to fix at the manufacturers level. I will eventually have to drill my own holes, but honestly I am not that picky. I just have an ugly gap between my fans. I 3d printed an icicle to hold up my gpu there instead. I am going to give this a 5 star solely because that extra fan doesn't matter, and out of an otherwise perfect case. I can accept one small flaw for it's price. If it was over $150 in price, I would give it a 4. But this is too good of a case for it's price for me to give it anything less than a 5.

Good quality. Lots of space for easy installation. Supports less fans than indicated in the description, but eight 120mm provides plenty of airflow. I would buy it again for sure. Including cables and ports for both types of USB3 with connection to motherboard headers is a big plus.

Thin metal. Nice glass. Pink is in. Instructions were thin with zero on the mess of wires and English errors. We bought it because it's pink period. Bitter disappointment after half a day of assembly.

ITS POOP

Full tower with good space for all components and easy cable management

Well equipped, excellent value for money.

The argb fan controller works fine but I connect both the fan and argb connectors directly to mobo headers. The two installed lower fans are redundant in my opinion, and I removed these. In fact i would suggest removing them in the first instance to install a full ATX, for full to the mobo headers/ connectors. Although there is USB/C connectors for the case ports, they will not be up to the full speeds required for most users but work as expected. There are all of the screws required for build, provided in a bag, in the case. The case is made of a relatively thin alloy and when screwing in fans, etc. be careful not to overtighten as this could deform the screw holes. The layout is decent and ATX mobo and power supply went in easily enough. There is no PWM direct management for any of the supplied fans, although white 120mm fan replacements do not look out of place. The general space to accommodate various cooling options such as top mounted 360 aio coolers is more than adequate although a decent fan cooler will fit perfectly as well. The airflow through the unit appears fine on temperature testing although I did replace all of the fans for the aforementioned reasons. Power supply is good although easier to remove the disk tray that has a thumbscrew fitting, for easier cable management (replace after cabling if required).Overall, when finished, looks very nice and not out of place for a decent build.