FLOLAB NanoArmour ONETIME PRO for iPhone 15 Pro Screen Protector, Anti-Reflective, Anti-Rainbow, 3D Tempered Glass, Ultra Clear, Edge Reinforced, Easy Install, Dust-Free, Scratch Resistant

This is an initial review on the installation and first impressions of this screen protector. As of typing I have only had it on for about 24 hours so will refrain from commenting on durability. I picked this case after reading several reviews on screen protectors for my iPhone 15 Pro Max. I usually refrain from using screen protectors for three main reasons: the first being I can always tell that a screen protector is on due to sizing of the glass. It alway seems that the screen protectors have a noticeable edge to them that doesn’t run to the edges of the phone. I understand this is often times with case compatibility but this seam always attracts hair, dust and other particles that get caught in the edges. The second issue that comes due to the first is that because of these edges, chips and cracks are much easier to occur. This of course makes me want to remove the screen protector and install another. The final reason is instillation. I have used a lot of different screen protectors for various phones over the years and no matter how good the kit, instructors, and my pressing is, I still seem to end up with bubbles that I can no get rid of which ruins the whole experience for me. Enter FloLab. The instillation guide is very easy to follow and the items included also have step by step instructions so you can follow along both ways. When I reached the final step of removing the instigation bracket, I was unsure if the screen protector applied or was still in the brackets. That’s how easy the install was and how seamless the glass is. Had I not seen one small bubble on the edge of my screen (which I removed with the applied squeegee) I would have continued to think there was no screen protector on. The edges of the glass have a curved finish to them providing a smooth transition from the screen protector to the phone itself, adding to that feeling of not having a protector on. I currently have a Spigen MagSafe case on my 15 Pro Max and when running my nail between the screen and case I cannot discern where the glass is. I would compare this feeling to using Samsung Galaxy or other curved screen phone without a protector on. I think this will increase the overall durability of the glass with no sharp edges to chip or crack but that remains to be seen. My final issue is the claim of the anti-glare coating. This was not the reason I bought the screen protector but is a clear main marketing point for this version. I haven’t been able to notice a significant reduction in glare on my screen which is a shame. Overall, I think the pros of this screen protector heavily outweigh the cons. It is not the most expensive screen protector out there but it certainly is on the premium end when it comes to price. However, I think the perceived longevity of this product, combined with its quality and easy instillation make this a must pick for any iPhone user

Boy my hubby went on and on how this was gonna be great. Even watched YouTube videos with him. Seemed legit. My husband has never really needed to replace a screen saver in the past maybe once that I remember. I am the one with little hands and tend to drop the pro max phone I have. He does not. One week after putting this bad boy on and there’s a hairline crack in it. Tried to process a return and it’s a hassle and a half. Can’t find the order or order number. So it’s still on his phone. He says it’s guaranteed but we can’t get a hold of FLOLAB. So if you read this it would be nice to have it guaranteed and replaced. UPDATE: Was contacted by Flo lab. Only to be told to file a warranty claim. Which we tried to do originally and the form kept telling us order not found. I explained this to them and they still asked for us to fill it out again. Just replace your product! It has a hairline crack. The phone wasn’t even dropped. What a run around. Dont listen to the YouTube reviews. This is not a superior screen saver. And customer service is a joke. Still not replaced. Still no resolution from FloLab. They could easily send a new one and we can return the one we have. But nope. Hassle back and forth. I’m at the point where we are just going to order something else. UPDATE NO 2: Again being asked to use the warranty through the website and their website will not honor my Amazon order number. What a run around. They do respond but want nothing with actually helping solve the issue which seems to be their website. It should not be this hard to return something that has a lifetime guarantee. Had we purchased another brand we could have returned it for a refund or had it replaced by now already. Now just processing a full return through Amazon and if the money is not returned I will escalate this further through Amazon. Be followed their process and it didn’t work. They stated in their emails it did t work and still want me to try it again through warrant customer service team. Which they claim is “friendly “ . Well who is emailing me? Because you’re not friendly and not helpful. And when I’ve told you I’ve followed the process once already why ask me to do it again. I’m not a moron. It’s just a run around. Buyer beware!!!

I would like to give this screen protector a 4 or 5 star rating because it is great. However, there were and still are some issues with it for me. First off, although the installation is simple enough and all the provided installation parts are great, I had an issue while installing it. I followed the instructions to the “t”, but when I pulled on the tab (slowly as stated in the instructions) to remove the film covering the sticky part that is supposed to attached to the screen, the tab came out and the film covering the screen did not. So I had to remove the screen protector and the installation jig, remove the film covering the screen protectors, made sure that the screen was lint free, installed the phone into the installation jig that was still holding the screen protector and I was able to install it. Everything looks great and looks like it is lined up. However, as soon as I installed my case the bottom right edge of the screen protector lifted up. I pushed down on it and tried to get my case to sit on top of it and it seemed to work. Fast forward a few hours later and that same corner is lifting up. I push it down and readjust the case and I comes back up at some time during the day. So… what do I do? Do have to replace my case? I paid about $40 for one screen protector and there was not indication that it might not work with my case, which by the way is just a simple clear case nothing fancy. Anyways, if it stays down it is a great screen protector. Maybe I’ll reach out to the manufacturer and see what they say. Update: I contacted the manufacturer Flolab and they were very responsive and agreed to replace my screen protector. I had to pay for shipping ($9.95) but that is part of their warranty program. I increase the rating to 5 as their customer service is superb and the product is as well (as long as the installation kit works as it should). If you are wondering, no, they did not ask me to leave a good review.

It’s true that this screen protector is easy to install. I will note that I did have to remove bubbles with the included tool, but that didn’t bother me and took maybe 5 minutes. Also, this is the case for every screen protector I’ve used, ever. I’ve had this particular screen protector since December. My phone has taken more falls than I care to admit, and all was well. However, two days ago, my phone fell down an entire floor (accidental drop on the stairs). My phone fell face down. While the screen protector cracked in two places, my phone screen was completely unharmed. Given the gravity (quite literally lol) of that one story fall, I am extremely impressed. So, I purchased a second screen protector to replace the previous one. My phone wasn’t cheap (I’m sure none of ours are), and I will happily buy another screen protector that saved my phone during a one story fall. tl;dr: Saved my phone screen during a one story fall, extremely easy to install, bubbles are easily removed with the included tool, it’s a screen protector that you forget is even there (good feel/look), you might need to replace it after a bad drop, but given the price of my phone, that protection and security is worth it to me.

It’s a nice screen protecter that’s easy to install (though you only get one so don’t mess up). Fits my phone perfectly, it looks nice, and feels nice to touch and swipe on. The reason I’m giving it two stars is because only a few days after installing it I began to notice TONS of micro scratches. You only notice them when the light hits them right, but you can definitely feel them. I wouldn’t feel the need to give it two stars if it wasn’t for the price. When paying $35 for a SINGLE screen protector I expect it to be flawless. My old $5 screen protector didn’t have this issue. Everything else about the screen protector is great though. Just honestly not worth the money.

Only thing it has going for it as a screen protector is its anti reflective coating, protection is about the same compared to others. Glass breaks. Installation frame is average, others with pulling implementations are typically better, the static from pulling theoretically removes any dust that may land after cleaning. Regardless, it aligns and fits. Initial cost is too high, especially for only one, doesn’t make up for it with having to pay for lifetime warranty shipping (~$10 for a small box shipped through ground advantage is ridiculous) Other market competitors provide two screen protectors and a completely no-cost warranty if a replacement is required. I would only purchase if you rarely break screen protectors and REALLY value anti reflective coating (could also go matte from others). About a $10 difference when it is on sale compare to market alternatives.

Somewhat easy to install. Don't wait too long as the bubbles are tuff to move to edge of glass. Glass looks good and bright. But for only ONE glass = $$$$ :(

The FLOLAB NanoArmour ONETIME PRO is a solid choice for protecting your iPhone 15 Pro Max screen while maintaining its visual clarity. 3D Tempered Glass: The 3D curved design ensures full coverage and a seamless fit, protecting your screen from edge-to-edge. Anti-Reflective and Anti-Rainbow Coating: These features reduce glare and minimize rainbow effects, enhancing visibility in various lighting conditions. Ultra Clear: The high-transparency material preserves the natural colors and brightness of your display. Edge Reinforced: The reinforced edges provide added durability and protection against accidental drops. Easy Installation: The ONETIME PRO comes with a dust-free installation kit and clear instructions for a hassle-free application. Overall, the FLOLAB NanoArmour ONETIME PRO is a reliable option for protecting your iPhone 15 Pro Max screen. Its 3D design, anti-reflective properties, and easy installation make it a practical choice for preserving your device's display.

My favourite aspects of this screen protector are how easy it is to apply and by including a dust removal sticker that covers the entire display, it makes it easy to get it on perfect with the install tray without dust. The next best thing is that it has rounded edges which makes it more comfortable to use vs my previous screen protector the OtterBox Amplify Glass Glare Guard, and it also has a stronger anti-glare effect compared to it. I hope the oleophobic coating lasts longer than the Glare Guard, if it does then I will probably only buy FLOLAB protectors from now on.

For the price is not as expected, durability wise is strong, but the oleophobic coating is not that good

Comencé utilizando esta marca en mi iPhone 13 Pro hace algunos años y me gustó mucho, sin embargo la instalación era diferente y tomaba más tiempo y cuidado. En este caso, sólo puedo decir WOW! De verdad no entiendo las malas reseñas. No es necesario re alinear el protector, el kit de instalación es muy preciso y sencillo! Simplemente es lo mejor que he probado en cuanto a _Aluminocilicate_. En zafiro ya es otro tema, pero si no está disponible el protector de la marca que me gusta, voy por Flolab y sé que es garantía.

Seguí las instrucciones al pie de la letra y hasta vi videos en YouTube de otros instalando la mica y no sirvió se despegó en unos minutos …

Pretty disappointed with my purchase(s) so far. I initially purchased one of these based off some reviews I had seen on YouTube. The product and packaging were really nicely done, and great initial quality. Installation was very easy and appreciate the install guides and hardware. I decided to register my product for warranty on day one, just in case I have a claim in the future. While the screen protector was great for protecting against scratches, a very small drop caused the screen protector to crack. Not to worry I thought, as I was covered under warranty and submitted a claim (I thought it would be a similar process to Zagg, but it’s far more vague). I submitted the claim in February and received a generic response “We are looking into your request and will get back to you shortly”. It’s been >2 months and still haven’t heard back. When these screen protectors shatter, there are shards of glass which make it unsafe to use, and so I took it off and ordered another flolab screen protector which I paid full price for. This one cracked too after a tumble from about 1 foot (with a genuine apple case on laminate floor) These are very expensive screen protectors. I thought they would either be more durable or have a better warranty than the cheaper alternatives, but they do not. They are incredibly overpriced and I think more money goes into packaging that it does into creating a good product and supported by a good warranty. I should add, I’m generally good with my electronics. I spent years working in the telecom industry and know how to care for my hardware. I have never had such a poor performance from a screen protector before. I would recommend the cheap JetTechs than can be replaced for next to nothing, or a Spigen/Zagg that comes at a higher cost, but more reliable warranty.