Sewing Seam Rolled Hem Foot for Sewing Machine,8 Pieces Sewing Machine Accessories of Guide Sewing Foot

It will not connect to my sewing machine. BE sure to read all of the product description and check your machine(s) before buying. I think they would work well, but I can't use them on either of my sewing machines.

Before anyone else makes my mistake, note the specifications! The hemming swirl thing is a very specific tool for specific machines. This product page has a couple of different hemming tools and some may work for your sewing machine while others won't! So don't buy it just because someone said "It works for my Singer Heavy Duty!" Think, WHAT works? I have a Singer Heavy Duty (idk what model) and I saw someone say that "it works for Singer Heavy Duty, so I assumed they were referring to the swirl hemming tool. I was wrong. The swirl does NOT work with all Singer Heavy Duty sewing machines. Check out my photos, my SHD does not have screws in front of the foot, it has them on the sides, makes a huge difference. Now the tool itself is splendid, I fanengled it into the proper spot and with some effort on my part in keeping it straight, it hemmed things beautifully! So, it works! IF it works with your sewing machine. Now, I don't want to return it because it was my fault, so I think I will gift it to my seamstress friends who may have different models of sewing machines. :) Long story short, read the description carefully!!!

Didn’t fit my. Machine. Can’t really rate.

Doesn’t fit every machine, but I was able to make it work on my Singer 401a by taping it down where I needed it. Practice on scrap fabric first! I found it worked best if I held my left forefinger at the edge to make sure the fabric didn’t slip out, and was able to hem all 29 feet of the chiffon bridesmaid’s dress from hell without killing anyone.

All the reviews I read are for a magnet to make your stitching straight. The product is a rolled hem foot. It says several times in the info that you need to have a machine that has a screw holding your plate down on your machine and that has to be in front of your, presser foot this enables you to attach the rolled hem device to the screw hole and tighten with the screw so it doesn’t move. No magnets are needed. I did not read thoroughly as my machine has the screw holding my plate in place on the back of the needle and that hole and screw need to be in front of the needle so I cannot use this. But it is mentioned several times in the description so make sure you look and see That the screw on your machine is there and is in front of the needle by at least a half an inch so you can put the hemming device into the screw hole and then screw it on tightly

wife likes them

Nice items.

It didn't work on my sewing machine. I have a singer Heavy Duty and the screws that you need to attach it to, are position way to for from what it shows on the video. Personality for me it didn't work.