3 Engine Motor Trans Mounts Fit 99-06 Silverado Sierra Tahoe V8 5.3L 6.0L

Worked perfect , had to replace an engine in my Chevy 3500 and changed out the mounts at same time - good idea and these worked

Fits perfect

Listened to other reviews and took a big drill bit and wallowed out the engine side mount holes. Connected them all loosely before tightening Found out after mounting the frame side middle hole was the big problem. I had to take a dremel burr and carve the bottom center hole with it mounted in the truck - 2002 sierra 2wd 1500 If you got the patience for this it's a cheap deal better than stock I welded a steel plate on the driver side mount to make it solid. Now i have less slop in the drivetrain & clutch jobs dont require a jack under the engine. Vibration isnt bad. Just use a rubber trans mount

The cheapest set of mounts I could find for my 05 suburban. I figured I'd take the gamble. Like a lot of folks said the bolt hole width on the engine side is too wide. It seems like it's due to the press forming process. Instead of enlarging the holes, I put each of the motor mounts in a vise and clamped down the "ears" that bolt to the motor. That squared up the pressing and easily aligned the holes. Other than that; they seem just as good as factory and have worked out great for a month so far. Can't be mad for the price.

Good engine mounts

Direct fit

The mounts look good but I had to drill out the block side holes on one mount to get it bolted up. Not a huge issue for me but others that may not have the ability it could be an issue.

Just what I needed