TB-S550 Universal 124" Miter Saw Stand

Very solid construction. The legs and arms extend with little effort and lock securely, and are very sturdy even at full extension. The quick attach/ detach brackets are solid and when unlocked, allows the saw to slide back and forth on the rails very smoothly. Tires are solid rubber, not cheap plastic so it grips and rolls across most [reasonable] surfaces. I dragged this unit up a set of stairs with a landing with a 12" sliding compound attached without any issues. The handle is plastic but feels solid. I would not recommend lifting the entire unit by the handle with your saw attached if it is as heavy as mine. When in the "travel" position (legs folded in) it does not balance itself with my saw attached. However, mine is among the largest and top heavy you could find. Smaller miter saws may be able to be stored attached and vertical. Now that I think about it, I would probably not store mine vertically even if it could, I imagine that could throw the saw out of alignment over time. Love this thing, wish I would have invested in one sooner.

Robust! Heavy duty. Very few are these strong.

This is a cool saw table. I bought it because my 51 year-old back did not appreciate me carrying my compound miter saw out of the basement - it was heavy and very awkward. CONS: After reading reviews, this seemed like an ideal rolling, collapsing table. Unfortunately, it still requires a lot of awkward lifting in order to extend the legs, and there's just no good way to do it. I've tried a few different methods, and yet I'm always struggling. After I roll this back to my basement, I have to lay it down flat, I can't stand it on end to use less space. The wheels are spaced too narrowly, so while I'm rolling it across my lawn, I have to be very careful the whole thing doesn't tip over on its side. These issues are frustrating but still better than me trying to carry the saw by itself. PROS: Very sturdy once it is setup. Extension arms are convenient and function well. Height is ideal for cutting. A good table, but not perfect.

So our Dad likes to think he's Superman in the Shop BUT his back tells him .... NOT! I recently watched him try to Schlep his new Miter Saw across the shop. I immediately knew I had to lend a hand. The Toughbuilt company put out another Great product in this Miter Saw Stand. From the Steel Tubing that the Saw Brackets attach to and slide along To the Solid feel the 4 legs provide when extended to the 1/4 turn release knobs for adjusting the lumber dollys To the Ear to Ear smile on my Dad's Face. Would buy this product over again without hesitation.

This is a well-engineered rolling miter saw stand. It has heavy-duty construction - much stronger than many competitors in it's price range. And, contrary to some other reviews and complaints, it stores upright with saw attached. (See below.) ASSEMBLY: straightforward, but DO NOT follow directions and open legs before installing pull handle and wheel assembly. Underneath is a very tight fit; leave legs closed and work with unit inverted. VERSATILITY: easy fit with my Ryobi 10" sliding compound miter saw; includes adapters for saws with irregular base holes. Stores collapsed horizontal on floor, or vertical against wall to save space (see below). CONSTRUCTION: solid, solid, solid, with heavy steel and some clever engineering (e.g., legs can be folded either end first). CONS: pull handle is tight against bottom of material support post, must be grasped underhanded to avoid barked knuckles. Collapsing and setup take caution and strength (but what big tool doesn't?) STORING: Can be stored collapsed lying down (see picture 1) or standing UPRIGHT WITH SAW ATTACHED (see picture 2). The trick (yes, I'm an engineer and, yes, this is a clever hack not devised by the manufacturer) is to pull out the material support extension somewhat and turn the support bar sideways (see closeup in picture 3). Be sure to lock extension and support bar. Voila!

Easy to put together. Seems very sturdy. The flip down arms on the legs to hold boards are great for when you need to cut a bunch of boards at once. At first, the stand seems a little low, but after using it a bit, I think it's actually a better height than the slightly taller stands that im used to. I'm 5'11" so not exactly short, but I imagine a 6'6" person might need a stand with adjustable leg height.

I think this a decent miter saw stand. Seems like it’s pretty beefy construction and it should last and the price was reasonable. The downsides I’ve experienced are as follows. The handle is really close to the support braces (see pic). There’s hardly any clearance there and I scratched my knuckles pretty good the first time I tried to wheel it around with the saw attached. Nothing my Sawzall couldn’t fix. Also with a 12” sliding miter saw this thing is super top heavy and really awkward to open and close. Also with the width of the wheels it easily tips over when transporting. It doesn’t help that the carry handle is pretty narrow so it’s hard to get enough torque on it with one hand to counteract the tipping tendency. So now I pretty much just leave it open and just get someone to help me lift and carry it or just drag the back legs. I may try to rig up some wheels to the legs and space them out wider for better stability. With a smaller miter saw this probably would be fine, but if I had to do it over I would have gone with a more stable (wider) stand that has wheels when upright and that has a extendable leg to eliminate the need to shim.

Great buy for the money 10 time’s more sturdy than a dewalt stand!! I have my big 12inch dewalt sliding compound miter saw on it (weighs 86 pounds) and this stand is rock solid I sat on it and wiggled around and it didn’t budge!! I love the way it folds up and acts as a dolly with wheels I leave my saw locked on and dolly it from job to job by myself! Excellent buy I’d buy one again and again and would strongly recommend this stand to anyone !! Also have got a lot of complements on it !

Very easy to put together. 10 to 15 minutes very strong and sturdier my saw feet's perfectly . Just one thing: is a little hard to lower down on is wheels and is not a good idea to stored up. But this for me is not a big problem. Good price and very easy to use. Recommend 100%.

I have seen other chop saw stands. I have a DeWalt chop saw and decided on this brand over DeWalt because of price. After receiving the unit I am pleasantly pleased it is actually built very well - will last a life time. Folds up with the saw for easy transport. Only issue are the rollers. There are none. They are simply pipes holding the board, which is not a problem really, the lumber slides easily as it looks like the whole unit is powder coated. I recommend this product.

This appears to be a well made product and so far it has been a very steady and strong support for my heavy Bosch mitre saw. There are two points that stop it getting 5 stars. The sliding end supports are very basic and require adjusting every time they are used. Not just the toggle clamped slides but the crew clamped height adjustable supports. Its due to the basic (and cheap) design and a they are somewhat sloppy in fit. They are functional but annoying. The second is that there is no lifting handle at the wheeled end and you need one to lift the stand to lower the legs. If you leave the saw mounted (which makes for a VERY heavy lift) it is really awkward just using the framework. The handle at the other end is poor but at least there is one!. This is very well price and generally good stand with only small niggles. Recommended.

Très bien dans l'ensemble mais la poignée de transport mal placé empêche de prendre une bonne prise.

Great product, easy to put together and use. Very sturdy.