Active 2.0 GPM Flow and 1800 PSI Peak Pressure Electric Pressure Washer - Power Wash, Wall Mount, CSA Certified, 23 lbs, 2 Gallon Tank

I did my research on this power washer before buying, and this power washer is one of my favorite purchases in a while. I specifically purchased this power washer for washing the cars. I was at the point where I was getting tired of dragging the power washer on wheels from the garage and setting up everything before I started to wash my vehicles. For those of you that know what I'm talking about. Well I got there too. It was time to put together a wall mount unit for the garage. When the package arrived. I was really impressed at how small it was. It only weighs 12lbs, and its the only 2GPM power washer I could find south of like $700. The unit came with a long wand, foam cannon, your typical spray tip sizes in 3.7 orifice and like a 25ft cable. I was not interested in the peripherals, as I had my own products already, but if you didn't have anything it would be a good start. Not sure if that foam cannon is any good, but you can pick up a sweet deal here with the bear force ones. The SS one is like 38 bucks https://www.amazon.com/BEARFORCE-Stainless-Connector-Adjustable-800-5000PSI/dp/B0CDVYDKLT?ref_=ast_sto_dp&th=1 I paired this unit with the Mekoh wall unit found here https://www.amazon.com/dp/B0D9GQPNN9?ref=ppx_yo2ov_dt_b_fed_asin_title I originally purchased this wall mount with the holes in it because I was going to tie wrap and or put brackets on the shelf to keep it from falling off, but then I found these 3m feet to sit this unit down in for like 15 bucks on Etsy that worked even better. The unit goes no where and is rock solid. Just FYI. Should you go that route. Make sure to have everything lined up before taking the tape of the 3M stuff, because once it touches the shelf. Its set. The reel I went with was a 100ft coxreels here. https://www.amazon.com/dp/B004E3W4QW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 This thing is built like I tank and I love it. I went with OG 50ft hose, 6.5ft garden hose, and 3 ft jumper hose. Some of the fittings you will need if you like the setup are: Quick disconnects https://www.amazon.com/dp/B0CT29YPFN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 90 street elbows https://www.amazon.com/dp/B098NCKW2Y?ref=ppx_yo2ov_dt_b_fed_asin_title Garden hose quick disconnects https://www.amazon.com/dp/B09PFNF8KH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 I highly recommend this power washer. It runs at about 1050PSI 2GPH. It really takes off the dirt off the vehicles and the foam from my foam cannon is tremendous. Not to mention when I get ready to wash the car. I just turn on the water and the power washer and I'm washing inside 2 minutes. I cant tell you how much that makes me smile. I should have done this years ago. Another tip about this power washer is that its not load at all compared to that floor unit from Sams I have had for many years. It has a pleasant hum. Just a tip. Do not pair this with a Uberflex hose as it will cause surges and possibly burn up the motor. Only use steel braided hoses.

Husband and son love it. Great middle of the road pressure washer. We didn’t wanna spend $800 on the super good ones so this was a compromise. Works as you’d expect. If it craps out I will come back to update.

Been using the Active 2.0 pressure washer for detailing my 2025 GMC Sierra AT4, and after three washes, I’m really impressed. Paired with an MTM PF22.2 foam cannon, this thing throws out thick foam and delivers consistent, high-pressure output without bogging down or fluctuating. Setup was easy, startup is smooth, and the build quality feels solid — especially at this price point. I’ve used it with both GYEON Foam and CarPro Lift, and the results have been excellent so far. No leaks, no overheating, no complaints. I’ll be moving to Montana within the year, where it’ll face colder weather and heavier use, so I’ll plan to update this review after a full year of service. But based on current performance, this pressure washer is more than living up to the hype.

I'm so glad I chose this pressure washer. It's wonderful. Good pressure, good flow rate, I can very quickly wash my car and also use it power wash a grungy slate deck back to sparkling clean and new for nearly 5 hours straight (for long duration duty cycles). It's very portable, does not get too hot, and has a longer rated lifetime than most other electric power washers. Get a bunch of quick connect fittings, high pressure coupler, and a second pressure hose to give you length options and it's fantastic. I've not once tripped a breaker, and use this attached to a 25' extension cord. The included soap foamer works fine, but now is draining the soap tank within seconds, so I probably want to upgrade to a better foam cannon, but out of the box it will get the job done. paired this with a bunch of TwinkleStar fittings, and a AR Annovi Tecomec Mecline MV925 trigger handle + Forney 75126 Quick Coupler Male Socket, 1/4inch M-NPT. Absolutely love it for car wash duty since it does not have a massive extension arm. I also got: Twinkle Star Pressure Washer Hose Quick Connector, M22 Metric Male Thread Fitting, TWIS375 Twinkle Star Pressure Washer Adapter Set, Quick Disconnect Kit, M22 Swivel to 3/8'' Quick Connect, 3/4" to Quick Release MUTURQ M22 Male to 3/8 Inch NPT Male Pressure Washer Adapter Thread Brass Fitting Twinkle Star Pressure Washer Quick Coupler Nipple,5000 PSI,TWIS281 Flexzilla Pressure Washer Hose with M22 Fittings, 1/4 in. x 25 ft., ZillaGreen - HFZPW3425M-E Twinkle Star 3/4 Inch Garden Hose Fitting Quick Connector Male and Female Set (6 Sets) I also got a "HYDRO MASTER Heavy Duty 3/4" Brass Shut Off Valve with Large Handle, Full Flow Garden Hose Connector", since if you don't have a trigger handle attached to the pressure outlet, the water from the hose can bypass the pump and flow out, so it's nice to have a shutoff valve. Just don't forget to open it again when you turn on the pump or you'll probably cause cavitation and shorten the lifetime of your pump! Couldn't be happier. Get this! Edit: I picked up a "Twinkle Star Foam Cannon Snow Foam Lance with 1/4" Quick Connector", and that does a MUCH better job than the included foam-cannon. It's by no means a quality part, but for the money - it gets the job done. Just be careful with it and don't bang it around. It has excellent foam output, but it does not appear to be very robust and is very easy to cross-thread. Be patient!

very good product-works great