VEVOR 2L Sonic Cleaner with Heater Timer & Basket, Professional Digital Sonic Cavitation Machine, 60W Cleaning Machine for Watch Instruments, Glasses, Coin, Metal Parts, Tool

Bought this for cleaning throttle body parts and it worked very well. Depending on how much fluid you put in the unit will determine how long it will take to heat up. With a full tank of fluid you need to give the unit a least an hour to fully heat up if you’re setting it any higher than 80 degrees Celsius. It will get hot though so be careful when putting parts in the machine. The controls are very basic, like a toaster oven, just time and temperature which I like. The basket seems sturdy enough and the small parts basket and drain line also work fine. I used an ultrasonic carburetor cleaning solution and water to clean an old used throttle body on a TPI type corvette and it cleaned it up nicely. Though, with parts like mine that have lots of nooks and crannies, it will take 2-3 cleanings placing the part in different positions for every bath. Don’t expect the part to come out looking like brand new, a lot of times some areas will need some extra cleaning with a brush, but whatever dirt is left behind easily comes off with a brush and rinse. It is a bit noisy, almost sounds like a leaking air compressor tank, I have mine on a bench in the garage and can barely hear it in the house, which I found okay because you know when it’s running. It definitely worth the money, seems well made, the control knobs felt solid and was easy to clean and store. If you’re planning on using this for car parts or larger items, I would definitely recommend a least the 10L size.

Worked awesome should’ve bought sooner. Definitely worth the money glad I got the 30L. If you’ve beeen thinking about getting one here it is. Has a small enclosure for jewelry but works awesome for jets and screws!

I previously tried cleaning a Kohler K301 carburetor by dipping it in a commercial solution without success so after a bit of research, I decided to try this particular unit. I used dish soap and tap water in my first try but next time I will use Simple Green or an agitator and distilled water. I had a white coating on the carburetor but it didn’t seem to affect the operation. The carburetor now works well again. I used the zip lock bag trick but the agitation is aggressive enough that my bag punctured. That was fine; I dumped the soap and parts directly in and clean up was easy. It’s interesting to see videos where old paint comes off and the parts are all shiny. Not sure what they’re using but it’s not dish soap. I do wish they offered a slightly larger size without going up to 6 liters but it fits. Well mostly - it lies flat but you need to take off the throttle lever.

I purchased this sonic cleaner because it offered the size and features that were important to me. I especially like that it has solid knobs to control the temperature and time. Many ultra-sonic cleaners will only heat to 80 or 90 degrees, this one heats to 110 deg. I also felt that the price was good. It seems that I always have projects around the house or for freinds. I plan on using the cleaner for things like rebuilding the caburators from lawn mowers or power washers that so often I am asked to fix. I have only had this for a short time. I have not tried to clean any jewelry but have used it to degrease an coip[le of items, which worked well. I just finished cleaning the spray head from my kitchen sink and my shower head with the flexable metal hose. They both had crusted build up and clogged spray holes. The sonic cleaner did a very good job at removing and loosening the crusted calcium build up on both. For me this size works very well as it gives me the ability to clean larger items. This size also provides a drain with shut-off valve eleiminating the need to carry it to remove the dirty contents. I have cleaned a couple of small items and put them in a plastic baggy with a solution mixture the cleans them best. This way I do not contaminate or need replace the all of the solution. I am very pleased with this purchase as I am sure there will be many discovered uses having this in my garage.

I got the 15L cleaner with the heater, timer, and basket. I've been using the CREWORKS 10L Digital Ultrasonic Cleaner for a while, but this is just so much better. It's significantly louder, but I just use it in the spare bathroom and close the door. Problem solved. It heats up SIGNIFICANTLY faster than my CREWORKS, you can tell that the machine is agitating better than my CREWORKS, and the handles on the side make more sense than my CREWORKS (the CREWORKS is on the bottom...it feels like my hands are always going to slide out). It doesn't seem much bigger than the 10L externally but it can hold more items internally for sure. Coming from the digital controls on the CREWORKS to the knobs on here, I was pleasantly surprised. I enjoy being able to just spin the knob to where I want and boom, instead of holding a button and waiting however long for it to get to the value I want (it's the little things in life). Overall, I think this is definitely a better brand to get an ultrasonic cleaner from and you won't be disappointed. As for how long it lasts, we will see!

I use this to clean everything from Carburetors, fuel valves, tools, and more. It does consume a lot of fluid, so I use the NASA trick (NASA Tech Brief 19690000520) for smaller jobs. Make sure to fill the tank completely for every job. The NASA method uses a plastic bag to enclose smaller parts in cleaning solution, and filling the tank with regular water to reduce exposure to strong solvents that may produce harmful vapors or be flammable. Adapting this method for smaller jobs, I use a "green brand" (purple colored) 'Pro HD' cleaner diluted to 1:3, it's safe and doesn't make harmful vapors and performs excellently and filled the tank with regular tap water. I've also filled the tank with a 1:3 dilute mixture of the purple colored "green" cleaner for large jobs, fitting dual motorcycle carbs without issue. The small tea strainer "parts basket" works great for cleaning jets and needles as well as all the fiddly screws and parts you need for your carbs as well. It's a bit small though, so you may consider using the baggy method for anything larger, especially if you don't need to fill the tank. I keep finding things to clean with it, and it works super quickly. Keep in mind, for stubborn soils, you may want to flip the contents between cleaning cycles. This is just the nature of ultrasonics in this price range. As for the temperature regulation, the ultrasonic transducers produce heat, and can quickly heat up the cleaner significantly hotter than the set point when running multiple cycles. When cleaning aluminum, you generally want to avoid high temperatures (over 40c) with some cleaners as it can cause oxidation. This is why I rated it 4 stars as its temperature regulation is solid if you're just hot tanking things in cleaner, but when using the ultrasonics it can quickly get up to 60c. This works great for cleaning in general with your favorite "oil cleaning duck brand" dish soap and water, but when using specialty cleaners (which do work significantly faster), the higher heat isn't always necessary. The drain tube that comes with it is a joke, the clamp that comes with it will not seal it to the plastic hose barb that comes with it. The plastic hose barb doesn't even seal well with the included thread tape. It's poorly thought out, but necessary to empty the tank without carrying a heavy fluid filled container that, when full, can easily spill. Go to your local hardware store and purchase a decent brass hose barb and a length of matching diameter heater hose so you can drain it into an empty container of some sort to dispose of spent solution or drain the plain water if you're using the baggy method. I never leave it plugged in - I'd advise anyone against doing this with any of these types of appliances outside of a laboratory setting. I don't keep it setup, and pull it out whenever I need it so it works out well for me. All in all, this cleaner saves me A LOT of effort cleaning tough greases and varnishes, soils, dirts, and build ups that manually would take me hours to clean satisfactorily, and always leaves my parts looking just about brand new, generally in 15-30 minutes. A old carb would take me hours to scrub with noxious carb dip to get to look as clean as this does in a fraction of the time. I've even ran old tools that have surface rust through it to clean the rust out of the joints and re-oiled them to bring them back to like-new condition. A solid buy but my only recommendation to Vevor is to consider their airflow in the case to help keep the transducers from influencing the tank temperature to such a degree on their "Professional" line. That said, this thing works great and I love it.

Item as described and works excellent

works great , only used once but it cleaned my pipe . Unfortunately i didnt realize this was celcius and when i rinsed my pipe in sink water , it shattered

urządzenie skrajnie NIEBEZPIECZNE! po włączeniu wybuchło!!!!

Nog niet gebruikt, maar ziet er goed uit. Goed afgewerkt. Toch verrast door de kleine inhoud. Mijn bril past er alleen diagonaal in, terwijl de inhoud 2 liter is.

Ich benutze den 2 Liter fürs Ketten reinigen und Wachsen. Für 600 Gramm Wachs braucht es 1 Stunde 45 Minuten. Wenn man die lange Aufwärmzeit einkalkuliert ist das Ergebnis des Wachsens mit Ultraschall beeindruckend. Preis Leistung top. Auch die eingestellte Temperatur passt. 60 und 90 Grad getestet. Es passen bis 800 Gramm Wachs in den Behälter. So gehen sicherlich 4 Ketten gleichzeitig rein. Absolute Kaufempfehlung. Noch zur Lautstärke. Der 2 Liter ist recht leise.

Wait to much after delay and alos not working

Bon produit, conforme, et bien emballé. En parfait état de marche.