Cable Matters 4 Port USB 3.0 KVM Switches USB Hub for 4 USB Computers and Devices (KVM Switch)- Button or Wireless Host Control - USB-C Adapter Included for USB-C and Thunderbolt 3 | USB Sharing Switch, 4x USBA Peripherals, Includes USBC Adapter for USBC, USB4, Thunderbolt 4/5

En lo particular me faltó un puerto USB

Posso fare solo due appunti, si deve accendere lo switch prima di tutto e se volete collegare un dispositivo oltre gli 1,8 metri dei cavi allegati, dovete usare un cavo amplificato, per il resto, facilità d'installazione, manovra ed efficienza, è favoloso, ora posso collegare W XP, W 7 e W 10 ad una serie di HD e fare a meno di un NAS che mi era morto, lasciandomi con dei dischi pieni di roba importante e con serie difficoltà per recuperare i files. Imballaggio e tempo di consegna ottimi come solito Amazon.

Windows Hello対応のカメラ1台で3台のパソコンの顔認証ログインを可能にする痒いところに手が届く素晴らしい製品。 更にロジクールのMX master3S(マウス)とMXkey (キーボード)を3台それぞれBluetooth接続していたので、それまではキーボードを切り替えて、マウスを裏返してシーケンシャル切り替えをしなくてはいけなかった。 しかしこちらのUSBセレクターを使えば、そちらもワンタッチで同時切り替え可能になる優れ物✨ 更にこれは嬉しい誤算で、USB3.0(5Gbps)のセルフパワーUSBハブとしても使えて、ちゃんと外付けSSDも実用可能速度で使うことが出来ます。 少しお高いですが電源も付属していて、ケーブル類も高品質なものが全て同梱されていますし、リモコンまで付属していますし、有名メーカーで信頼性もあり、シーケンシャル切り替えではなく、ボタンで直接ランダム切り替え出来ることでストレスフリーになります。こちらを買って損はないでしょう。 他のレビューに切り替えがもっさりすると書いてありましたが、私の環境では全く問題なく実用的なスピードで切り替え可能でした。 注意点としては他のレビューにある通り本体が軽いので浮かないように工夫が必要です。 もう一つは他のレビューを鵜呑みにしてリモコンの電池サイズを規格品ではなく、ワンサイズ上の物を使うといいということで実際に電池を用意してやってみましたが、次回以降交換困難となります。ちゃんと規格品を使いましょう。

I had been looking for a USB switch since I started working from home as I share a keyboard, mouse and wireless headset between my work laptop and home computer. The main things for me were four ports to plug devices into and a switch or remote so I can hide the switch away and activate it without it physically being on my desk. After having issues with a popular USB switch also purchased on here (it was cheaper but my mouse / keyboard had disconnects even when connected to a power source, ghost key presses and was slow to wake, sent it back for a refund) I decided to take a chance on this one which had no reviews but was more expensive. Been using it for the past two weeks daily now and it has been flawless. No disconnects, quick swapping between computers and the remote is fantastic and has great range, working even without line of sight to the main unit. The switch itself is slim allowing it to be tucked away behind the desk and comes with four cables of decent length to connect to your devices. Works from USB power and no separate cable for power is required. If you are looking for a USB switch with no issues I highly recommend this one.

Updated: I’ve had this for 4 years and it might be the most used accessory in my desk. Very good value. Original: I have four computers at my desk, two laptops, and two desktops, and two main displays (in addition to lap top displays). I wanted to able to switch between all four computers, and fully utilize both main displays with each computer, without paying 100s of dollars for a more modern KVM switch with full HDMI pass-through for TWO displays. If you are not aware, Displays can be used through USB 3.0. A USB 3.0 path straight to a USB to HDMI converter, will allow that PC to utilize the display. Furthermore, "DisplayLink" based USB to HDMI converters exist, and allow the conversion of one USB3.0 path to two displays. This was amazing when it first came out, and is still amazing to me today. You can run a display over USB 3.0. There are other chipsets (e.g. Magic Control Technology Corporation) but as far as I can tell only DisplayLink chipsets would work with all types of operating systems. So, why do you care. With a USB hub sitting in this little dongle, you can connect your keyboard, and pass through to your DisplayLink USB to HDMI dongle. Actually, you can connect any USB device to this little switch (I connect a full USB hub) and any device on the other side (hard drives, anything). With this bit of information, you can almost do a full KVM replacement. There are some obvious caveats here. I doubt you would get full display performance through a USB 3.0 connection to your machine. But for work purposes (documentation, writing code, browsing) this is more than sufficient. And for the kind of gaming I am interested in, not really a problem. In the picture attached you can see one USB cable coming out the front left going into the SIIG Hub (which supports two displays via a DisplayLink chipset. You can buy cheaper DisplayLink devices to avoid the expense of a hub). The other USB cable coming out goes to my hub, which has a wireless keyboard and mouse dongle, and any drives (I have a DVD drive) I want to control. Press the button 1-4 and seamlessly switch between computers. Out the back 4 micro usb connectors do a USB 3.0 connection to each of the computers (the port on the far-back right is the USB-C power supply for the switch). Setting up DisplayLink on a Linux machine is non-trivial, and with Ubuntu 18.04 I couldn't get it to work. With Ubuntu 20.04 the normal install programs worked ok, though I used a "debian" install script which configured things properly. DisplayLink absolutely works with Mac and Windows and is trivial to install, so I have two windows PCs, a Mac, and Linux machine, all going through this switch. With the remote or hitting a button, I switch between machines. Awesome. So what's missing. Well, there's no audio pass-through with this type of setup, something you might get with a KVM switch; you would have to work with audio over USB, which seems to be about $12. Display outputs may be limited, as well as display refresh rates. It is relatively easy to get most of the machines working with DisplayLink, but getting Ubuntu to work was very difficult. Overall, really happy with this, and was able to dump my old 1 display SIIG KVM switch.