XiKe 4 Pack Flanged Ball Bearing ID 3/4" x OD 1-3/8" Lawn Mower Bearings

The original front wheel bearings on many lawnmowers are not the sealed type. I replaced mine with these XiKe brand bearings because they're sealed to keep dirt out. They fit the front wheels of my Greenworks 80V electric mower perfectly. They have a flange on one side like the original bearings, to keep them in place within the plastic wheels. These bearings are factory greased and sealed so that they will operate smoothly, be more durable, and be much less likely to squeak than the original bearings were. It's a relatively inexpensive way to upgrade your mower's bearings.

Work like they should, fit well

Outstanding. It’s so rare to find a replacement part that is cheap and also exceeds the quality of the original. My previous bearings on my lawn tractor trailer blew out after three years and a lot of abuse. To be fair I overload that little trailer constantly hauling 800+ pounds of firewood and who knows how much gravel. The old non-sealed bearings held no grease and both sides exploded. Attached is a photo of the old vs new. Simply punch the old bearing out with hammer and punch then lube the wheel with a little grease where the new bearing will seat and set in place using a socket that matches the diameter of the seating ring and tap in place. A nice tight fit, and yes, these bearings were properly lubricated from the factory. I popped off a seal to check. Beats $60 each for a new tire and wheel (x2) with bearing assembly, and these bearings appear to be better quality anyway. Will buy again.

Very well made and the price was much less than at my local hardware store.

They work in my Kobalt 80v electric mower. They were almost too easy to install in the wheels; very easy to push into place and tended to slide off before placing the wheel on the axel. No issues after one weekend.

I got these to fix my wife's wheel chair. I did not expect it to break down but it did. So I was going through Amazon and doing some research on line I found out what the parts on the assembly were called and then searched for my item. Measuring was easy. I used a measuring tape which only went down to a 16th of an inch so where my numbers did not match those on Amazon I consulted a measuring chart that went down to 32nd and 64th if an inch to see where I was close enough and where I was way off. I selected my size, crossed my fingers and ordered. And wouldn't you know it, I got it on the first try. They fit like a glove. Came clean and did not leave any black greasy residue on my hands or tools. It was a surprisingly easy process. I went to a repair shop for mobile medical devices and all were too scared to buy ball bearings they did nit have sizes for on paper. They dealt with other brands and told me Good luck.

These worked well in replacing the wheel bearing on my battery operated Lawnmower wheel

These fit and work as replacements for the original ones on my mower rear wheels. A lot less expensive as replacing the entire wheel.

perfect for my application, three wheel edger wheels for lawn edging

Muy buenos productos

👍 lawn mower pushes effortlessly again.

Decent price. Used on power washer

Fit my John Deere, no more bushings that wear away your steering pivot arms.