Evapo-Rust ER012 Heavy Duty – 128 oz., Rust Remover for Auto Parts, Hardware, Antiques | Rust Removers and Chemicals

I do not often write reviews on a product. Usually, when I do, it is for a bad one. Not so in this case. This product has allowed me to fully restore to a new like condition some tools that I inherited from my grandfather. Some are over 120 years old. The product worked fully as advertised. With a gallon of CRC I filled to 1/4 depth a plastic container at a size that fit my tools. I soaked them for several days. Then, with a drill press running a medal brush, I buffed them. It turned out perfectly. I know some metal can be so deeply pitted that removing rust is nearly impossible. Still, in spit of that being the case with a few of my tools, it came out fine--just a bit more buffing. I highly recommend this product.

5-13-2025, Revision: A...I bought a new brake rotors for an up and coming brake job on my car. The problems is, that the old houses pole barn leaked rain water onto my new rotors. Luckily just one of them got rusted. I bought a gallon and placed the rust remover and rotor into a coolant drain pan. It took overnight to get it all. So far so good. It has left a slight blackish color to the rotor. It looks like it will be usable.Next up is an old large Square (L shaped ruler). Its has surface rust on it. TBD...

This isn’t an infomercial type material , this stuff works well. Pictures are before and after for the hammer and the receiver was from a 75 yr old shotgun. Soaked overnight and cleaned it right up. Rinse with water then treat the metal so it doesn’t flash rust. Very impressive.

This pipe wrench had been in the yard for over a month! Overnight soak and it was clean of rust! Rinsed, dried and lubricated it! Bonus it seems to remove old grease as well!Made the Ace slipjoint pliers look like new!

I recommend it, but don't believe all the You Tube hype.

Heard good reviews and figured I would try it, not expecting it to work as well as it did. Really impressed!! It took heavy chunks off a nasty cylinder wall. Let it sit 4 days, it turned black, siphoned it out and couldn't believe my eyes lol. Going to use it on everything now. Worth the money.

This stuff really works. I had a bunch of tools that were very rusty and to my surprise it worked very well. It tool all the rust off all the tools.This product does not work the fastest but it gets the job done. The only thing is that you will have to soak your items overnight to get the best results.Dont leave your tools in more that 24 hours or else you will get a sludge build up.You also must rinse off your tools thoroughly with water and once it drys spray it with some WD-40 to keep the rust off.Great product

I can not believe how this stuff works. You can see great results in 30 mins. I left tools in over night and next day clean right down to bare metal ready to dry and paint. I am truly amazed by the stuff