白光(HAKKO) ダイヤル式温度制御はんだこて FX600-02

最高に使いやすいハンダゴテです。 入電後の使用可能温度に到達する時間も早く、温度調節もできて持ちやすい！ 安物のハンダゴテとは作業効率が違います。 これからも良いハンダゴテを作り続けてもらいたいです。

これまで出力の小さなものを使用して苦労しておりましたが、温度調整ができ、とてもスムーズに作業できました

温度も直ぐに上昇します。スリープモードあるので安心して使えます。 素人作業では十分な性能です。

久しぶりに半田ごてを使う機会があり、どうせ使うならちゃんとしたものをと思いこちらを購入しました。 噂通りでとても使いやすい。温度調節ができるタイプは初めてでしたが使用感がとても良い感じです。 オリジナルはコテ先が細すぎるので、何種類かあるコテ先を追加して購入しました。

値段なりに良い仕事します。わ

温度設定が出来るので多種多様な半田付けが可能になった。

必要に応じてたまに半田を使う程度の半田初心者です。マザーボードのコンデンサを交換するのに、温度制御できるものが欲しくて購入。プロではないので、本気仕様だと高価すぎる場所も取るのでこれくらいで良かったのかと思う。一応当初予定の作業もできた。自分のスキル・経験が足りない所為で、外しやすいところと相当苦労したところがあった。温度というか熱容量的に難しかったのかも…。商品の良し悪しを判断できるほど私のレベルが高くないので★３とします。

温度の選択が出来ます。

I bought this soldering iron and I plugged it into the socket outlet which burnt out instantly. Unfortunately, nothing mentioned in the specifications regarding the voltage. It is only mentioned on the soldering iron itself. Despite that “Hakoo” is very good soldering iron brand, I put one star for the following reasons: 1. Noting mentioned in the specifications about the supply voltage. 2. I considered that all imported electrical items to UAE should be 220VAC.

Excelente cautín, en unos 20 segundos alcanza temperatura y su regulador ontegrado te da varias opciones camparado con otras opciones. Ya he comprado varios para uso en casa y la oficina, todos excelentes.

Je viens de le recevoir, je l'ai pas encore testé, je découvre qu'il a déjà été utilisé (voir la photo de l'embout), est-ce normal ??? Je laisserais un autre commentaire après l'utilisation, j'ai payé aussi cher pour avoir un produit tout neuf, je suis déçue 💔

I ordered this iron as an upgrade to my Sparkfun 937b soldering station. I wanted something more compact yet more powerful, while also more durable. The wand for my 937b would sometimes start to flex if I was applying a little but of pressure to get solid contact between the tip and the work. I wasn't overdoing it, it's just that once the plastic wand would heat up it would start to be less rigid. To begin this Hakko iron is extremely durable. It is very well built. It's very rigid and you can tell from the hardware and fittings that it's meant for steady work and can take heavy use if needed. Also, don't let the nominal 50W power rating fool you. That is the wattage you get if you use the Japanese 100v electrical system. Here in North America where we use 120v this iron runs at 74W. Check the excerpt from the manual I've attached to the review. 74 watts is plenty of power for large jobs like soldering heavy wires and large speaker tabs. And, unlike the many clones and no-name irons and ironing stations out there, when Hakko says 74 W I believe them! Just because a $15 no-name iron says it's 60W doesn't mean it's true! With this iron, however, you can bank on being 74W at 120v. Another advantage is that it has a 2-prong plug, instead of the grounded 3-prong plug that is on the North American market version. While this does mean you have to manually ground it if you want it to be 100% ESD safe, it also means the power cable is much lighter and more flexible than the one on the grounded version. This means it is more comfortable to use, and the cable won't pull the iron out of the holder just by its weight. Grounding is easy, by the way; just before you take the tip to the work, touch it against whatever you are using as a ground bus...like the place you connect your grounding wrist strap and/or your grounding desk mat to. Don't have either of those? Then don't worry about whether the iron is grounded, because you have far more risk from ESD from yourself or the work surface than the iron! Despite being durable and powerful, and having an easy temperature control feature, the iron is also light and really compact, so I can easily have all my soldering stuff in one small toolbox. It is also comfortable in the hand. I don't know why some reviewers have said it's hard to hold, I didn't find this at all. I love using it. I highly recommend this iron if you want to treat yourself to all the best features and reduce your desk clutter. Just make sure you buy GENUINE Hakko tips. This iron will of course take any of the millions of clone T18 tips out there, but the Hakko tips have so many advantages. Why buy a performance vehicle only to put crappy tires on it? The tip is where the rubber meets the road, so to speak, so do yourself a favour and ditch your cheap soldering iron tips!

Product looks genuine. Switched it on and all seemed to be ok: all lights where working and and handle was getting hotter and hotter, but even after 3 min tip was too cold to melt led wire for soldering. I even touched it and it was barely warm. I googled what could be an issue and immediately i found that most likely internal heat conductor is damaged or broken. I open it up and bingo - new item arrived with snapped internal heat conductor.