John Guest Speedfit 3/8 x 3/8 x 1/4 Inch Angle Stop Adapter Valve, Push to Connect Plastic Plumbing Fitting, ASVPP1LF

I don't know why you're looking at this tee valve, but if you're like me - it's because your $400 RO kit came with some garbage fitting that leaked like a sieve in the middle of the night, leaving you with water damage and a huge headache in the morning. Better still, like an idiot I assumed I was at fault and reinstalled the tee after finding no obvious defects. Four hours later, I heard the drips. Something in the valve was leaking after a period of time, but after long enough just to trick you into believing it's okay. I hunted for HOURS in the local hardware store and online to find the right fitting. FINALLY I found this beauty. Well built, and extremely well engineered - it took me 10 minutes to install and has worked flawlessly. The metal section freely rotates along internal seals, so you don't need to worry about clearance for the valve during installation. The metal threads are properly machined, able to cinch down properly without fear of stripping some chinesium, and the push fitting gives that satisfying quality feel when the tube locks in place. I am *thrilled* with this part, and highly recommend it over anythign else you'll find. In a world full of headaches in unreliable garbage - this fitting is a bargain at twice the price.

I tried 3 or 4 different option from different suppliers and this is the one to get! I had some kind of issues with the others I tried. This one connects to the 3/8 cold water line under your sink and allows you to connect the 3/8 cold water line to the facet while at the same time connecting the push connect water line to your RO system with a shut off valve. Super easy and no leaks! Great durability! Wish I had found this one first. Great product! Don't hesitate, buy this one!

I ordered this valve to replace the the plastic T adapter that came with a water filter system 3M Aqua-Pure Under Sink Water Filtration System - Model AP-DWS1000 . This is excerpted and modified from my review of that system. This John Guest Speedfit valve worked like a charm. It has metal fittings, so it threads properly - that was key to the whole project. It has a nice shutoff valve, so you can shut this off separately from your sink water. I have those typical chrome handle valves that once turned, they never seat again, so it will be nice to leave it alone to change the filters. As a huge bonus, the center white part also swivels independently of the fittings, so it doesn't have to "end up" where you need it. Thread both ends snugly, and then spin the valve to point the tubing where you want. I had a hard time making sure this would be the right one, because I was searching for a T or Tee like they provided with the water filter, but this is an "adapter valve", not just a T. It's 3/8 inch and attached to the end of the valve coming out of the wall; the adapter that came with the system went up on the faucet end. Some of these JG adapters come with a thread size converter (this one didn't), so you can get those if you're not sure. Basically, all this water filter / coffee maker / ice maker stuff is 1/4 line, John Guest brand. Your sink fittings are generally either 3/8" or 1/2" on various ends. I figured it out from the braided line between the valve and the sink faucet. Held my breath, turned on the sink water... no drips. Installed the tubing, turned this blue valve handle, water filled... and no drips!

Exactly what I needed Simple install without ANY LEAKS

Worth every cent. Fast, easy installation, and it works great. This adaptor bailed me out when I added a dedicated faucet to my Epic under sink water filter system. I highly recommend !!

Excelente!!!

Well-engineered solution to adding a reverse osmosis filter to your kitchen sink. The RO system I purchased wanted me to puncture my copper pipe w/ a puncture-fitting (absurd!). I thought, "surely there's a way to connect a 1/4" Quick Connect plastic hose to my existing copper plumbing. The white plastic piece spins around for easy of hose-routing.

Bought this to replace the broken piece that came with our water purifier. The other piece, a different product from a different company had 6 pieces that needed to be assembled (many opportunities for leaks) and the nuts were thin plastic coated with chrome which we found out when it broke in half. This product is one piece with mo gaps an the PVC is thick and the metal parts are actually metal. It was quick and easy to install. The only knock on it us the outlet to the filtered water should come with a retention spring clip. I used one from my other system which fit perfectly but this should have had one.

I bought another one that was all metal thinking that it would be better and it leaked as soon as I installed it. I returned that one and decided to try this one as the reviews state that you can't go wrong with a brand name. Installed it in 10 min and everything works perfectly for my rodi setup. No leaks at all. This is the one to get.

It's US standard of 3/8 Cimpression thread, not 3/8 BSP European standard. "Compression" is mentiined in details but should be in title and much more explicit because I bough it on Amazon.es and expected European standard... Didn't know that Compression is different size... Amazon is not a shop for professional plumbers so description should be more explicit about this...

Excelente opción con cierre de paso

It's US standard of 3/8 Cimpression thread, not 3/8 BSP European standard. Does not fit to European hoses. Otherwise a good article and quality I assume.

works great. better then anything youll find at homedepot or rona