UniQual 6pcs HSS Circular Saw Blade/Cutting Discs Set as Rotary Tools Accessories/Attachments compatible with Dremel, UniQual, MiniCarft, etc

Good product in better price. Nicely fit to the chuck.Thanks to Seller.

Good one for small DIY works.. tried on teak, hdpe and cpvc pipe material and is much easier to cut such items with less effort than conventional methods.. it took a bit practice to use on corded and wireless drill machines.. the blades are sharp and sturdy.. good to cut something which is 20-40mm thick..Price is also reasonable

Average Quantity, Rusted fast.

Don't buy

its perfect but scaryi am new to tools and i do wood carving so i need to cut down pieces of woodTHEY ARE VERY SHARP!please wear gloves

Too small, Needs Lock Mechanism & Lower Pricemuch smaller than they appear in the product images, and the mounting rod is very thin. It attaches using a simple screw, which tightens it in place. Here's where the problem lies:With prolonged use, the screw is likely to become loose since both the rod and the drill will be rotating.Ideally, there should be a lock mechanism or the rod should have been square-shaped instead of cylindrical. That would prevent the blade from loosening or detaching while working.For a product of this design and quality, the price should be around ₹120, not ₹250—it’s simply too expensive for what it offers.ब्लेड बहुत पतली, लॉक सिस्टम और कम कीमत होनी चाहिएमैने हाल ही में यह सॉ ब्लेड सेट खरीदा, लेकिन यह तस्वीरों में दिखाए अनुसार बड़ा नहीं निकला—बल्कि ब्लेड बहुत छोटे हैं, और उनके साथ लगने वाला रॉड बहुत पतला है।इसे फिट करने के लिए साधारण स्क्रू का उपयोग किया गया है जो कसने पर ब्लेड जकड़ता है। लेकिन समय के साथ, ड्रिल चलने पर यह ढीला हो सकता है।बेहतर होता कि इसमें कोई लॉक सिस्टम होता या रॉड गोल (cylindrical) की बजाय चौकोर (square) होता, जिससे ब्लेड का हटना मुश्किल होता।इस डिजाइन और गुणवत्ता के हिसाब से कीमत ₹120 तक होनी चाहिए, न कि ₹250—जो बहुत ज्यादा है इस स्तर के प्रोडक्ट के लिए।

Look, we have many tools available, however, if we do not know how to use it then it becomes a challenge.I just used it for the first time and it it amazing. The best way to use it is to understand the strength, especially with a rotary tool. I had set it to the lowest RPM that is 8000rpm on the rotary tool. Next I used very gently pressure on the wood (ensure you have a good grip applied to the wood using a clamp or vice).Gently cut on the line you have marked and you will see the results for yourself. Very satisfied with this blade.Note:-Ensure the spindle is fully inserted into the collet.- Ensure the blade is tightly secured.- use safety gears and safety guards provided with the toolset.

Good for domestic usage. The shaft which goes in drill machine is not tampered.