Rough Country 2" Red Aluminum Leveling Kit for 07-18 Chevy/GMC 1500-1313

Made the front a little stiff but over all great product did exactly what I was looking for and the red was perfect for my build fitment was great and the look was definitely there

16 Silverado 4x4 crew cab. Perfect fit high quality. I would buy sway bar end links, they’re break or need cut.

I put these on my 2007 Suburban for the perfect stance. It looks fantastic. And with the aluminum construction, I don't have to worry about plastic breaking. Great value for the price.

Installed easy enough. Did as advertised. Gave me 2” in the front. I was doing work on the front end so it wasn’t out of my way. Plug and play no mods needed

08’ Silverado crew cab 4WD it leveled the truck perfectly. It’s only 1” thick but with the geometry after installed it added 1 3/4”-2” of lift. BUY YOUR OWN BOLTS! I broke 2 of their bolts tightening them down. Buy at least 2 10mm grade 8 bolts and make sure they’re 3” long measuring after you put a washer on them from end of bolt to that washer, that’ll eliminate having to cut the bolts that go under the front axle but I suggest buying all 4! Only took 30mins per side after I had the wheels off. All you need to remove is the sway bar link ends, and have 2 pry bars and an extra set of hands to install these. After you remove that sway bar ends and the 2 bolts in the bottom of the shock the lower control arm will drop on its own and just push it down with you hand and slide the spacer in from the back and then you’ll need a pry bar to pry the shock back and over the spacer while simultaneously using a second pry bar to push the shock left or right until you can slide the bolt into a hole. Do one bolt at a time and it’s pretty simple. Should be a 5 star but their bolts are not grade 8 and easy broke with a Milwaukee M12 3/8” impact.

Works good gave the front end the lift I was looking for

Perfectos!!👍🏼👍🏼

First off the install couldn't be easier on my 2011 silverado 2wd. I did not install per instructions. Just jacked up by the frame till the front tire barely cleared the ground.if i had jacked from the cross member the sway bar wouldn't have been fighting me. Unbolted the bottom of the strut( and removed the clips from the mount) and jacked up a few inches. Had someone pry done on the tire( never removed the wheel) and slid in the spacer. Just watch your fingers incase the pry bar or board slips. May not be this simple on a 4x4 but for my application it was, and took less than 30 minutes total including gathering up tools. And it made it level😀

These are good quality and easy to install. Leveled the Silverado perfectly.

Installation was easy! Fit perfectly. No issues since installed 3 months ago

Best Still use

Install went fairly easy, having an extra set of hands to keep the front strut clear while the levelling block is installed sure makes the process easier. I did have to trim about 3/8” off the end of the rearward bolts (hardware included with the kit) to allow for clearance, otherwise the end of the bolt would come into contact with the CV axle shaft while the lower control arms are fully relaxed. An alignment is essential after the kit is installed, as the kit will create a toe-in condition. Have had the kit for several months on my daily now, no problems as of yet and very happy with how the truck looks! Great value!

Makes a great difference in front end ride height . Truck is level now . Nice finish . Will see how it holds up the harsh elements. Get and Alignment after install