WEN Miter Saw Stand, Collapsible and Rolling with 3 Onboard Outlets (MSA330)

The stand was simple to put together and a very inexpensive way of having a rolling stand for my miter saw. 10” cordless Bosch slide miter saw fits easily on the mounting brackets and is stable during use. Being a stand that folds down and has wheels makes it easy to move around the jobsites that I’m on. Having 8” rubber wheels helps with this. These wheels also make moving up and down stairs easier. The wingspan when extended is reasonable. The only disappointment I’ve had with this stand is that I can’t fold and store my saw in a vertical position on its own. Even extending the one roller near the wheels fully doesn’t make it stable enough. It might work with a smaller or lighter saw. Not the end of the world when strapped against my shelving system but I wish it could when on its own. For under $100, and 20 mins of my time to put together, this certainly wasn’t a dealbreaker for me. Having used the DeWalt dwx723 or horses/job tables over the years, I’m enjoying rolling my miter saw around for work.

Nice portable stand it works well with my DEWALT 60V Lithium-Ion 12 in. Cordless Sliding Miter Saw Model #DCS781B. I did replace the saw mounting bolts that came with the unit. I had stainless steel with acorn nuts on hand. The extension is plenty big enough. For trim, work, and votes nicely for storage or transport. Most of the reviews and reports were accurate representations, does not store standing up, but I don't know that I would want the weight of my saw hanging like that for an extended time on the camlocks. I would definitely recommend this over many others that I looked at and put my hands on in the box stores. Easy setup and easy store, assembly was quick and straightforward. 1/4" Allen wrench, 1/2" nut driver or socket and Large #2+ phillips screw driver. Good product and a good price!

Great price but does have some limitations with larger miter saws. Overall a good product that is easy to assemble and fairly easy to maneuver. Mounting hardware could be more substantial but once again for the price it’s reasonable. The stand does not sit upright for storage on its own and does require modifications in the way of a 4x4 either minted or set under the removable extension on the end with the wheels and axle to stand upright and be stable. Otherwise it easily tips towards the back of the saw or requires you to store it lengthwise. With a bigger saw (Dewalt DWS779) it can be difficult to unfold and fold back up without it tipping towards the back side of the saw unless the saw is mounted closely to the end of the mount where the electrical outlet is located to make a lower center of gravity. There is still some instability but it’s minimal. It still works ok for this saw but requires a few considerations to avoid instability during unfolding/folding. Electoral outlet plugs into an included extension cord that cannot be locked into place and does easily fall out. Once upright on all 4 legs it is good and stable and easy to lock/unlock the legs for storage and transport. Overall good product for the price.

I just purchased a compound miter saw and also bought this stand as part of a package deal. This is my first power saw of this type and I wanted a good start. I’m quite pleased with this stand. It was easy to assemble and I was impressed with the quality of the materials and engineering from the get go. I love that it‘s foldable and equipped with wheels to make it portable. A great feature because my garage doesn’t have a lot of spare space. My Skil Saw mounts perfectly to the support rails and has a very solid feel. The electrical outlet on the frame is also a helpful feature. The price was very reasonable for such a quality piece of shop equipment. Overall, I don‘t think I could have found such a perfectly matching stand of this quality for this price anywhere else.

I own several Wen products. They are definitely hit or miss. This was a hit. It is very sturdy, was easy to assemble, and has nice features like flip out material holders on the front legs. The rollers are pretty standard, and operate smoothly. The saw feels very stable on this stand while working with it. If you think you are going to adjust the saw front to back after mounting, invest $2 in some wing nuts, as only standard nuts are provided, but that isn’t a negative, most just adjust side to side. That, by the way, is easy to do with the flip-handles. The price does not reflect the quality. You will get more than you paid for (comparatively). I really like this tool.

Sturdy and strong. Very good value if purchased on sale. Even the wheels are high quality. Best assembly instructions I have seen in 10 years (intentional humor included). I had hoped to keep the miter saw permanently attached to the stand but found it was too unbalanced for transport or storage. I keep a 10 inch Metabo miter saw permanently attached to the mounting brackets and it turns out to be easy to carry this lightweight saw to and from wherever I set up the stand. Easy and quick to attach or detach the saw. Stand rolls easily and is simple to set up or take down. I am pleased with this purchase. Makes using the miter saw much more enjoyable.

I’ve had this for about a year. It’s served well for rough builds like shelves for my tool shed. But it is difficult to get repeatable cuts so I’ve decided to replace it with something better. The L-shaped supports look like they would work as a stop block, but there is a slight radius at the corner of the L that can throw your cut off. Also the support itself is not really perpendicular to the long axis of the stand, which is also a source for error. You get what you pay for. If you need something that is very sturdy and will support a long workpiece through the cut, this is a good product. But if you’re attempting any precise and repeatable cuts, it is frustrating to use.

Gosh, I cannot express how much I enjoy this thing! We just purchased a new miter saw and were looking for something that would support it but not break the bank. We were coming up short for a while until we ran across this. For its price, it does everything you would want it to and more! It attaches easily to the miter saw, it extends well for long lumber, it has 3 power outlets, it has an adjustable leg for balance on uneven surfaces, it has wheels, and its body is made out of metal. I literally do not think you could ask for more. Sure. longer extensions for longer lumber would be nice, but this is longer than any in its price range. Only critic I could have is that the cylinders that you roll the wood on need to be lubricated. When we slide wood back and forth for cuts it makes a terrible screeching sound but easily fixed with some lubrication.

Worth every dollar, very sturdy and keep the saw very tight. Have been cutting lumber with it for a few days and no issues. Like the extra plug in mount on the end very smart design. I would recommend this table.

Le quedo perfecta a mi sierra ingletadora milwaukee, muy resistente.

Es lo que esperaba y es la adecuada para mí ingletadora Craftsman

I had a saw for several years and needed a stand. I am still buying cheaper tools until I can afford the higher quality items. This stand works well for me. It’s very sturdy and built well. However it’s not as easy to fold as some stands at a much higher price. My advice is if you are just getting into tools for a hobby then this is for you. If you are experienced and have expensive tools, get something like a Dewalt folding stand instead. For the price, this is the best bang for the buck.

super pour le support a scie sa va tres bien pour intaller la scie