J-B Weld JB Weld 50132 25 ML Off-White PlasticWeld Quick Setting Epoxy

Easy to use, great strength

All goodI recommend

It worked the2nd time around to fix my pressure spray bottle so it had very good strength.

very good purchase

Very strong bond highly recommend

I had high hopes, but the mixture is too runny!So I added a little bicarbonate of soda as a thickening agent working much better when gap-filling between 1 mm to 3 mm. Otherwise, the glue runs out of the joint!I do not think one should think of this as welding!More of glueing with your fingers crossed!

I used it to replace the small plastic pullers that are used to remove the hearing aid buds from a well known spectacle supplier. Both pullers broke off with in a short time of eachother. I used this adhesive to replace them using fishing line. I suggest that at least 24 hours is allowed to elapse before reusing the hearing aid.

This epoxy based adhesive is just the thing for repairing those little mishaps thet can sometimes come about with thin plastics and bodywork found on most modern (and older) Japanese motorcycles such as cracked panels and broken tabs on fairings and side panels.It cures to form a solid and dependable repair on most applications but the claim of setting within 5 minutes has to be taken with a pinch of salt, as does the 1 hour full cure time.It has to be taken into account that environmental conditions affect the curing times of any Epoxy resin based adhesive and that colder conditions mean the curing times are slowed considerably and that curing times indoors and in warmer weather will be accelerated.The dispensing tubes are perfect for giving just the right amount of adhesive and hardener to get a good mixture and the cap ensures there is no waste or spillage providing you re-fit it promptly after use.I did find that, once mixed, the adhesive was quite runny and overflowed the joint but it's easy to wipe any excess off while it's still runny. It also took longer than the 5 minutes claimed (Closer to 10 minutes) to set during which time, you have to hold the joint together or support it to stop it coming apart, But this does mean you have some time to re-position parts before it sets fully if you have to.But for these details it would have scored a full 5 stars, but to do that, It has to do what it's claimed to do and unfortunately, there isnt a four and a half star option.

habe damit schon einiges geklebt und restauiert wie z.B. das Kunstoffinnenleben eines 2005er Furbys

Joa was soll man sagen. Der Kleber härtet einfach nicht aus. Nach einem Tag ist er zwar fest, aber immernoch weich. und nach einer Woche ist er oberflächlich hart aber darunter immernoch nicht hart. Es wurde exakt auf ein 1:1 Verhältnis geachtet und gut durchgemischt. Würde ich nie wieder kaufen. Geldverschwendung.