10 Pcs Conductor Compact Connectors Lever Wire Nut Electrical Connectors for 2 Circuit Inline Splices 28-12 AWG

I got this to splice jumper clamps on my battery charger which came with some weird ass connector that was a pain to put on and take off.Now I have normal, standard jumper cable clips to connect my charger.Very solid, meet all the local electrical codes, quick and easy. Just cut the wire, strip off 3/4 inch, insert and clamp down. Done. Not worried about stress or pulling out.I used one like this with 3 slots to add a new outlet to an existing line that only had a couple inches of play, so didn't have room or slack in the wire to use wire nuts to splice in a new wire.So cut original wire (one black, 1 white, 1 green).Need 3 of these splicers, each with 3 inserts.Inside an electrical box (I used a thin / flat one).One block for all the black wires:- Put original black wire source into slot 1 & clamp down. Put original other end of same black wire in 2nd slot and clamp down, add 3rd black wire for new outlet into 3rd slot and clamp down. Now all black wires are bound together.- Do same for all 3 white wires (all 3 in one three-slot junction box)- Do same for all 3 green / ground wires.Presto, instant new wire to run to new outlet I was installing in ceiling of porch for camera.

Simple but effective. I needed these to connect speaker cable in an outdoor waterproof box. Very secure and well made and holds the wire tightly

Easy to install and held wires well.

I initially purchased this lever wire nut because I had an application where a bracket to hold the wire nut was helpful. These did not disappoint. The bracket does solidly hold the lever wire nut in place.These lever wire nuts seem to be quality constructed and grab the conductor making a reliable connection. Once the lever is closed, wires cannot be removed (unless you release the lever). It grabs wires very solidly and makes a reliable connection. I would trust these lever wire nuts to join wires for long term service.The only CON for this product is that the levers are NOT color coded. If you read the description carefully, you'll see that these lever wire nuts are configured for TWO inline circuits. These lever wire nuts do NOT tie all four conductors together. Each of two inline circuits are tied together. Because all levers are orange, you might believe that you can connect 4 wires together as you might with tradtional wire nuts, but this is NOT true. What you have are two separate circuits inside this wire nut, so you could connect together a pair of two-wire cables.Other that this one CON, these are very good wire nuts that when deployed, should last FOREVER. I recommend this product.

Otherwise they seem to be well made. Tested with 20AWG solid and could not pull it apart. As opposed to the traditional Wago style connectors these are made to extend up to 3 separate voltage potentials, instead of functioning as a wire nut. Back when I was changing out florescent lamp fixture ballasts in an office setting, these would have made that task much safer since the line side of the connection would not have been exposed.While they are provided with an attachable mounting bracket, it does little to improve the ability to mount except perhaps to a wood panel. Otherwise they just hang in free air.I plan to use one of these to splice a wire that is stretched tight leaving no room to remove the green running light on the pontoon, to replace the light bulb inside.

I've been replacing the old incandescent light fixtures in my house with new LED fixtures and these little connectors have saved me a ton of time! No tools needed and they just work. Perfect for ground/neutral/hot connections.

Received exactly the item and quantity I ordered. Good experience.

We keep buying so they must be worth it. He said gives him piece of mind, a great tool to give you piece of mind, holds up great and idiot proof!