220LBS Roof Rack Cross Bars for 2019-2025 RAV4 XLE XSE Premium Limited Hybrid LE with Side Rails, Lockable Aluminum Crossbars Cargo Rooftop Luggage Canoe Kayak Bicycle roof Bag

This item has a great build quality, no noise at all, easy to align and install, easy to remove and put back on, a nice and blended look, and has the capacity to store 330 lbs of stored items on top. Great overall product.

When I purchased this Flycle rack, no review mentioned install on a RAV4 Prime... but data elsewhere suggested standard RAV4 2019-2024 RAV4s trims including the Prime (with exception of some select special trims ex. Woodland trim) used the same roof rack model. -> This Flycle Rack fit my '24 RAV4 Prime SE model just fine!I found everything needed for install "in the box" except a tool for removing the OEM "covers" on the roof rails where the rack mounts (I carefully used a screw driver to pry these out, but a plastic pry tool would be safest for the car finish). Install instructions could be more clear (Toyota OEM PT278-42192 instructions are more complete if you can find them, as the rack seems to install almost identically). Basically the product consisted of black finished aluminum cross bars, black metal-like support towers on the ends, w/ black plastic "tower covers" (which first snap in place... then "lock on" by turning a plastic "lock insert" w/ a special provided key). I first removed the plastic "tower covers" from the metal towers, then "loose installed" the cross bars on the metal towers using a supplied hex wrench, then sorted the gaskets for installing the cross bar assembly on the car. There are 4x plastic gaskets fitting the bottoms of the metal support towers (protecting finish of the roof of RAV4). I had to flatten and re-form these gaskets pre-install, as they were folded and creases had "set" during shipment (but they flattened out OK). Each metal tower bolts down to the "roof rails" embedded in the roof of the RAV4 with one M8 bolt using a supplied hex wrench. My Flycle instructions did not specify bolt torques... but Toyota specs suggested 12 Nm = ~19 pounds force on the end of the supplied 5.5" hex wrench in my Flycle package for this M8 bolt. Once the towers and cross bars were in place, I tightened the retaining screws holding the cross bars in place on the towers (I did this with everything mounted on the roof... a bit challenging... but doable if you are tall or have something to stand on to see what you are doing under the cross bars.Assessment post install (but pre-use) - Seem great cross bars... rigid and strong... look like they could be OEM models to me. If you'll mount them permanently, they seem fine as-installed out of the box. If you will take them on/off as as needed... (my norm), several mods may be useful. For storing the OEM plastic "roof rail covers" in the glovebox... (for re-install after rack removal)... I cut a small corrugated cardboard "storage sheet" with holes punched in it to accommodate the somewhat fragile "plastic clips" protruding from these rail covers (so they don't get broken in glovebox storage). Two parts on each tower also look at risk of getting lost during repeated install/removal: the plastic lock inserts can fall out once unlocked, and the plastic gaskets can likewise get separated/lost. I plan to carefully remove (without dropping!) and then storing the "lock inserts" in the glovebox w/ the other bits needed to install/remove the rack... lest they fall out unknowingly when storing the crossbars when not in use. I will either do the same with the gaskets... or I'll permanently double-stick tape the gaskets to the metal towers. I'll store all the small "install bits" in a quart zip-lock bag in the RAV4 glove box for use when needed.Happy w/ purchase thus far (at ~1/2 OEM rack "discount prices" I found...).

I recently purchased the FLYCLE Roof Rack Crossbars for my 2024 Toyota RAV4 XLE, and I couldn't be happier with my decision. The installation was a breeze—just follow the instructions, and you'll have them mounted in no time. The aluminum construction feels incredibly sturdy, and it’s reassuring to know that it can support up to 165 lbs (75 kg) of cargo.One of my biggest concerns with roof racks is the potential for wind noise, but these crossbars have exceeded my expectations. They are designed to minimize noise, and I've barely noticed any difference while driving at highway speeds. This has made road trips a lot more enjoyable.The crossbars are a perfect fit for my RAV4 XLE and match the vehicle's sleek design. I appreciate that FLYCLE specifically notes which models they do and don’t fit—this made my purchasing decision a lot easier.I’ve used the crossbars with a rooftop cargo bag, and everything stayed secure throughout my trip. If you’re looking for a high-quality, durable, and quiet roof rack for your RAV4, I highly recommend the FLYCLE Roof Rack Crossbars!

Roof Rack Cross Bars for 2019-2025 RAV4 by Flycle arrived on time, well packaged and in good condition. All parts were supplied and decent quality. Fit and finish was fine. Installation was pretty easy and straight forward. I liked the extra quarter-turn fasteners in case some break or get lost. If I had to pick on something, I would tweak the instructions to make them a little clearer. The mounting base gaskets could be thicker and packed so they arrive without being folded and crumpled up.

Easy to assemble looks great on my 2022 RAV4 XLE.

Easy installation. Took me a few times to get the key cylinder to align for proper installation but otherwise piece of cake. Sturdy

Installed this on my 2015 Rav4 and it worked perfectly. Easy to install and I was able to place my Thule Cargo Box up top. Great value for the money and holds a decent amount of weight.

These crossbar should obviously fit my 2021 RAV4. After putting it together one of the cross bars was mislabeled. Luckily I caught that mistake right away.Upon completion of putting everything together one of the feet would not sit flush to my car. See the photo. I thought this was unacceptable and sent the whole set back.