Please Note: These are made in a variety of sizes, depending on your needs. Determine your screw size, and order the corresponding size in the Toggler. By the way, The Toggler Snaptoggle is a terrific asset in mounting things which are fairly heavy. Mounted a 4 ft. long tool holder.......with these things. As you can imagine, the total tools stored in the rack are pretty heavy......and it did and continues to do a great job of keeping them securely in place.

TOGGLER SNAPTOGGLE Heavy-Duty Drywall Toggle Bolt – 3/16"-24 UNC Zinc-Plated Anchor for Hollow Walls, Plaster & Tile – Holds 238 lbs in 1/2" Drywall, Easy Install – 10 Pack (with Bolts)

TOGGLER SNAPTOGGLE Heavy-Duty Drywall Toggle Bolt – 3/16"-24 UNC Zinc-Plated Anchor for Hollow Walls, Plaster & Tile – Holds 238 lbs in 1/2" Drywall, Easy Install – 10 Pack (with Bolts)

Q: Do they come in any other metal than solid 28 karat gold?

It's zinc played steel. Not 24 karat gold.

Q: Will it still work if I snip the end of the bolt? There is a brick wall behind the draywall I am anchoring to, and the bolt is too long.

Yes, as a general rule, you can always cut machine screws shorter as long as you are careful to clean up the cut end after you cut them. One trick is to thread a nut on the screw before you cut it, then unscrew it after you make the cut, the nut will straighten out any rolled over threads on the way off the end. Or, you could cut carefully with an abrasive wheel or dress the end of the screw with a grinding stone. Even better, chase the threads with a thread cutting die. Or, just go to the hardware store and buy a shorter screw. This toggle uses 3/16-24 (often called #10-24) screws. Available in a variety of lengths pretty inexpensively.

Q: Will nylon strap togglers work on a fiberglass shower to hang a fold up seat?

I would be concerned about this application for a few reasons. If I assume that you are going to have something behind the shower surface itself, such as some seriously thick plywood to provide the backing, then I still have to make a point about the physics involved here.Togglers, and any fastener really, are rated for a certain weight. If you are hanging a microwave, that weight is fairly static and easy to calculate.You are talking about a seat, and the problem with seats is that humans sit in them and their apparent weight due to the acceleration of gravity is more than the weight of the individual upon impact. I could pull out a lot of math, but suffice to say that a 200lb person who plops down into a chair, is putting far more than 200lb of strain on the chair at the moment of impact and this is likely to cause something to break and someone to get hurt. This is why I can drop a bullet and it won't go through anything, but if I accelerate it - it can pierce steel - and bullets don't weight 200lbs. You can obviously overbuild the solution, but keep in mind that the shower is a very wet place, and wood can rot over time and result in a potentially fatal situation if things go poorly around hard slippery surfaces.So I think the answer is yes, but you are going to want to over engineer your solution and then make it waterproof to a paranoid degree to ward against catastrophic failure or injury. If the backing behind your shower is not robust enough, it will be like trying to mount a massive TV on sheetrock - the material will give and the mounts will simply rip out of the wall as soon as someone sits on it.

ID del producto: 3616691

Transacción segura

Detalles

Size
10 Pack w/
Color
Clear
Material
Carbon Steel
Brand
TOGGLER
Item dimensions L x W x H
10.4 x 7.75 x

⚡seconds to install

💪238 lbs drywall hold

🔩3/16"-24 UNC zinc bolt

Comprados juntos con frecuencia

TOGGLER SNAPTOGGLE Heavy-Duty Drywall Toggle Bolt – 3/16"-24 UNC Zinc-Plated Anchor for Hollow Walls, Plaster & Tile – Holds 238 lbs in 1/2" Drywall, Easy Install – 10 Pack (with Bolts)

TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, for 1/4"-20 UNC Fastener Size (Pack of 10)

TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of 20)

Descripción

🔧 Snap it, hold it, love it — heavy-duty mounting made effortless!

BUILT TO LAST - Zinc-plated for corrosion resistance and engineered for vibration resistance—durability you can trust.
VERSATILE REUSABLE - Perfect for TVs, shelves, handrails, and more; toggle stays put even when bolts are removed for easy reuse.
STUD FREE FLEXIBILITY - Mount anywhere, even between studs, with a pre-installed screw that won’t spin or loosen.
UNMATCHED HOLDING POWER - Securely supports up to 238 lbs in drywall and 802 lbs in concrete—no more worries about heavy fixtures falling.
LIGHTNING FAST INSTALLATION - Drill, snap, and tighten in seconds—get your projects done faster and smarter.

The TOGGLERSNAPTOGGLE Heavy-Duty Drywall Toggle Bolt is a zinc-plated, 3/16"-24 UNC anchor designed for hollow walls, plaster, tile, and concrete. It supports up to 238 lbs in 1/2" drywall and 802 lbs in concrete, installs quickly with a simple drill-and-snap method, and allows mounting without studs. Ideal for heavy fixtures like TVs and shelves, it offers reusable, vibration-resistant, and corrosion-proof performance in a convenient 10-pack.