Waste Ink Pad Replacement for EPSON Ecotank ET-2800 ET-2803 ET-2720 ET-2400 ET-2711 ET-4700 L3110 L3210 L3150 L3250 etc. Printers, Maintenance Box with Extra Sponge Absorbant

Ok so first off. Super happy with this. I thought that it was only one pad per box but it’s actually two. One in a plastic sleeve and one in a new compartment thing they go in. So when I got two boxes, I actually got 4 pads which was a nice surprise. Maybe it says this in the description but I didn’t look lol.In the box you get a Thankyou card, gloves, a plastic bag to put your old waste pads in, a pair of tweezers, a screw driver and instructions.Now the thing I didn’t realize is that in order to reset your waste ink pad settings in your printer you have to go to the website and buy keys. These keys are 1-9.99$, I think 3 for 6.99$ and 5 for $5.99. Keep in mind though those are the cost of each key. So since I have a greeting card business and print from home I bought 5 for 5.99$ each. So the more you buy the cheaper they are. So every time you replace the waste pad, you have to buy a key for it to reset it in your printer. So depending on how often you plan to use your printer will depend on how many of these you buy. I’ve had this printer for over 3 years and just recently had to replace the pad since opening my business.I truly wish the keys came with the purchase. The app I had to download on my computer actually froze and ended up wasting a key but I reached out to customer service in hopes of getting that key replaced because it was $5.99.But other than the key issue I wasn’t aware of I am happy with these. It was very easy to change out the pads, clean the container the pad goes in and even downloading the app for the keys was easy.Will definitely order from here again when the time comes for replacements.

I am giving this product five stars even though I had issues resetting my printer because it was not product fault. The maintenance box was easy to install. Based on other reviews, I was prepared for the wic reset site that looked suspicious. I will say it is legit. I purchased a reset key which I later found out that I did not need. Read further and I will explain.After I downloaded the WIC software, I spent over 2 hours troubleshooting yrying to reset my printer. I am writing this hoping that it might help others. In the end, the problem was my Wi-Fi was not recognizing the printer. When I was trying to reset it. I ended up connecting my printer via USB cable and I was immediately able to reset my printer and start printing again. I am going to list the troubleshooting steps I took, but you might want to try that first. In addition, before purchasing a reset key, they do offer a trial key. If you have never used a trial on that printer. I suggest doing this first because in the end I used the trial rather than the key that I had purchased.Here are a few additional troubleshooting steps you could try:1. Ensure Correct Reset Key: Double-check that the reset key you purchased is for the correct model of your printer. If it's specific to another model or region, it may not work correctly.2. Reinstall WIC Software: Uninstall and reinstall the WIC software to make sure it's functioning properly. Sometimes a corrupted installation can cause errors.3. Run the Software as Administrator: Make sure you are running the WIC software as an administrator. Right-click on the WIC Reset tool icon and choose "Run as Administrator."4. Disable Firewall/Antivirus Temporarily: Your firewall or antivirus software may be interfering with the connection. Temporarily disable them and try again to see if that helps. Make sure to turn it back on when finished.5. Try a Different USB Port: If you are connecting via USB, try switching to another port. Alternatively, if you're using Wi-Fi, you might want to try a USB connection to see if that helps the software communicate with the printer. This is what worked for me.6. Use a Different Computer: If possible, try using the reset software and key on a different computer. Sometimes system-specific issues can interfere with communication between the software and the printer.7. Check for Firmware Updates: Ensure that your printer's firmware is up to date. If it's outdated, it might cause incompatibility with the reset tool. Be cautious, as some updates can prevent third-party reset tools from working.If none of the above works, it might be worth contacting the vendor of the reset key. They may have specific guidance or offer a replacement key if the one you purchased is faulty.Last resort would probably be to call Epson.

FYI, once you install the new kit, you do have to install the reset software - and you will need a key to activate it and make it work as provided in the instructions. The key was about $9 US. The kit worked perfectly.

This was a plus but I still need Epson for a reset code

Easy to install… just annoying that you still have to purchase a key to reset the printer. Which it’s Eldon’s fault..

This item worked perfectly and saved me a lot of money and headache for my Epson ET-2720 Printer!!! I highly recommend it!

Worth every penny, follow the instructions and purchase the recommended access keys to reset your printer. It’s not a scam. I did my due diligence.

This replacement unit does not work. The unit will not re-set. You must download files from suspect websites in order to re-set the waste counter. This is not a straightforward procedure of just swapping out one full plastic box and replacing it with another empty plastic box. Epson offers no meaningful support for this procedure, and after spending time on the phone, all Epson would say is that I need to take unit to authorized dealer and pay $40 to have the waste counter to be re-set