SUSEMSE Plasma Cutter 55 Amp HF IGBT Inverter Plasma Cutter Portable Air Plasma Cutting Machine with Accessories, Max Cut Thickness 12mm, 230V

The media could not be loaded. I do not normally write reviews for products, but I couldnt not write something about this machine. I was skeptical of the capabilities of this machine because of the price, but I was wrong to assume!I primarily bought the product to trim 1 edge off of some 10mm channel, neater than using a stihl petrol saw. I also make things from 2mm which I expected the machine to handle ok.I tested the machine on the 2mm first, absolutely fine.I then tried the 10mm, I used the maximum amperage setting and approx 70psi. The machine handled it perfectly! I did burn a couple of fuses out on my extension lead (I did anticipate this, as I do not have a good power supply where I was cutting the material) but once the new fuses were in, we were fine. This does not take away anything from the machine at all! I fully expected the fuses to blow. The channel was 2.4m long so I did expect it cutting material that long. I could of mitigated that by cutting in shorter runs and allowing the plug to cool down, but I was being impatient.I was cutting pretty slowly in the video to give myself the neatest cut I could, I could of gone a little faster, but I am seriously impressed with the capabities of this machine for £130!When I unboxed the machine, I was surprised at how small and light it is. I'd recommend upgrading the jubilee clips that it comes with and you'll need your own air fitting to connect the pipe to your compressor. I've attached images of the air set up as I've seen other reviews saying the instructions aren't very clear, and people didnt really know how to hook it up. The air regulator has an arrow on it to show the direction of the air coming in and through the regulator FYI. I'd also perhaps elbow the red air line rather than bend it, but this was a temporary set up for the first use.If it lasts cutting the 2mm, then what a bargain!

The set is exactly what I expected for the price. There were basic set up instructions that seemed suitable. The picture provided is a cut through 10mm mild steel it’s not a clean cut as promised the set was running on a 32 amp electric supply and a 100 litre compressor doubt it would severe 12mm. Cuts well below 10mm, when cutting 100x100 4mm wall box section the torch used a lot of consumables when piercing. This said the consumables are well priced for the style of torch. In all a handy little machine.

works well on light metals, good value for money

Tried using on 5mm copper and the torch caught fire

Great size: easy to carryNoticed that in previous reviews that some said it had a blue plug (I assume they meant a 120v or genatror type) this was not the case as mine can with a standard UK 3 PIN plug

This product is great, brought for my husband who was over the moon with it so it gets a thumbs up from us and highly recommend.

Thank you for your quick response very happy with my purchase will recommend anyone who wants one to buy this one very happy thank you very much

Unit comes.with a 32 amp single phase plug. Draws 20amps yet says it can run on a 13amp plugSent mine back due to the potential of fire. Unless you have a 32 amp.ring main then don't use