Zooz Z-Wave Long Range Double Switch (White) ZEN30 800LR for Fan and Light Combo (NO Speed Control), Hub Required (Works with Home Assistant, Hubitat, Wink, SmartThings, Z-Box Hub)

So let me start by saying support is awesome. Very responsive and helped me fix my issues quickly. I use a smartthings hub and was having trouble installing the device type handler. Turns out my phone was reformatting part of the code when I copied so it was causing an error to be thrown. If you are getting errors when installing try going through a pc. That worked for me. Once that was completed I installed the switch. Its pretty self explanatory and easy, especially if you have ever done electrical work. I installed all of my switches and dimmers so this was a breeze. I have a two gang box in my garage that housed two switches for the interior and exterior lights. I converted one side to a dual receptacle for our chest freezer so I needed a switch that would control interior and exterior lights in one spot. This fit the bill perfectly. I set up the dimmer on the exterior lights on a smart lighting setup so they come on at sunset and off at sunrise (to match the setup on my front porch lights). I set the ramp rate to max (99 seconds is max available in the settings) so it slowly fades on with the sunset and then back off at sunrise. Inside light is tied to the secondary relay for an on off setting. Ties to my garage tilt sensor to automatically turn on when I come in and off once the door closes (on a delay). Switch is fast and responsive, manual use works fine and app control is quick and accurate. I like the ability to change colors on the leds and the plethora of other setting available once you get into it. I've only had it in for a day so I can't speak to longevity or reliability yet, but I'll update this review once I've had it set up for some time and if I run into any issues. So far I'm happy.

I installed this about six months ago and have been very happy with this smart switch. It is the only good solution I could find for a single-gang dual-smart-switch for bathrooms with dimmable lighting and an exhaust fan. This switch works perfectly with HomeAssistant and has been extremely reliable. No "cloud" service needed, so no worries about security or losing functionality or being forced into some ridiculous subscription service like so many things nowadays. It is highly configurable... I set it so the bath fan turns off automatically after a specified time so the fan doesn't run all day and waste energy after taking a steamy shower. It works great.

Have this on a ceiling fan. The dimmer works great on the light of the fan. The fan itself is on the relay.For some reason, when I hit the relay on, the lights on the ceiling fan flash momentarily. I cannot tell if this is bleed on the switch end or the ceiling fan, so I can't dock for it.The buttons aren't quite as tactile as I'd like, but certainly are still very adequate to know when it's activated

Newest update - I had some issues with multiple switches. Contacted customer support and it has been the best customer support experience ever. They provided replacements for all my switches with a new version. So far, all is good and this level of support has turned me into a repeat customer.Update - I now have six of these and have had issues with all of them. They break and lights stay on or fans stay on and it’s not worth the time or effort. I am actually going to try and get my money back on all of them - terrible product and terrible experience. Do not buy until they improve on quality or fix the issues. Older review: Exactly what I was looking for. Easy install, thin profile so there is room for nuts and wires, easy handler install for SmartThings integration. I used a metal switch plate that seems to be causing the paddle to fall out when tightened, so I ordered a plastic one - hope that fixes it. Other than that, ordering 4 more for the rest of the house. Glad I waited for this product.

When I first stumbled upon this product, I couldn't believe what I had found. I'm relatively new to home automation (and DIY anything for that matter) and thought for sure the problem I was trying to solve was such an unusual one there was no way there would be a product that would meet my exact need. In this case the need was the ability to control three different devices in a very specific combination of ways and only a single-gang switch box to house a controller that could do the job. According to what I read, the Zen30 would do the trick!Even after reading the specs, I was still a little skeptical but ordered it anyway to see if there was some way it could work. This was my first Z-wave device installation and I knew nothing about the protocol going in. I'm not an engineer nor an electrician, but I'm also not the least knowledgeable person on the planet so I figured it couldn't be that hard to figure it out. However, when I unboxed the device and started trying to figure things out, I quickly realized my lack of knowledge and experience was going to make this a challenge and I still wasn't certain the Zen30 could do what I needed it to.Rather than try to stumble my way through getting it right, I opened a ticket with Zooz customer support asking some questions to confirm whether the device would do everything I needed and how to configure it if so. Karen, the support agent who responded to my request, got back to me quickly with a number of clarifying questions. She asked me about so many things I hadn't considered that I thought for sure I was in over my head. But because her questions were so detailed that I figured I would respond as best I could and see if she could help me stumble my way through the process of making it work. Long-story-short, Karen's patience, persistence, and depth of knowledge were instrumental in helping me get the Zen30 to do EXACTLY what I wanted it to do. She must have spent hours over the course of 6 or 7 email exchanges that went on for as many weeks, composing tailored instructions for me and continuing to check-in and provide support until I finally got the device installed and functioning perfectly. In all my years as a consumer and a software tech exec I've not received support as comprehensive and high quality as I have from Zooz. Customer service has become such an afterthought for most companies, I didn't realize how important it was to me and how big of an impact it could have. After this experience, I'm a Zooz customer for life!!Great product, excellent service!!

One of the biggest problems with smart lightswitches is that they're bulky and difficult to fit into electrical boxes. It's almost impossible to fit two smart switches in a 2-gang box, particularly if there's a lot of heavy-gauge wiring in the way.Ideally, someone would sell a double switch that has a shallow controller (so that it fits in a 2-gang box) and two separate, full-size toggles (so that it fits in a 2-gang cover plate). Since no one has done that yet (as far as I'm aware), this Zooz switch is the next best thing.Since I only needed to fit in one switch, the installation was easy. There would definitely not be room in my electrical box for two full-size smart switches. However, since the switch doesn't fill the cover plate, I had to buy a blank adapter plate to fill in the gap. You should factor that additional cost into the purchase.The ZEN30's instructions are excellent, with giant diagrams showing all of the wiring connections. As well, the wires are very flexible, which helps a lot for getting it into the box. My only criticism is that there's no built-in wire for ground. I was able to reuse one of the wires from a switch I was removing, but I could imagine people forgetting the ground entirely. It would be better if you only had to connect one wire for the line, freeing up another for ground.Since the switch is AC-powered, it was a breeze connection it to my Z-Wave network and set it up in openHAB. And wow, has Zooz ever allowed for customization. There are a ton of configuration parameters, from how fast the light dims in and out to a choice of colours for the LED indicators on the switch.The physical switches respond well, but you have to press and hold the on/off buttons to change the brightness, which makes it almost impossible to make small adjustments. Separate buttons for brightness would have been better. As well, the fan button is really small. It could have been twice the size and you'd still have lots of real estate for the light controls.These are minor complaints. It's a solid device, and I only hope that Zooz will read this review and like my idea for a shallow, 2-gang switch. I'll buy at least two of them.

Utilisation pour un cellier, avec Jeedom et tout est parfait