👀 See Everything, Miss Nothing!
The OxGord UTV Rear View Side Mirrors are designed for universal compatibility with 1.6" - 2" roll cage bars. Featuring shatter-proof tempered glass and a robust ABS housing, these mirrors provide a wide viewing range and adjustable angles, ensuring safety and visibility on any terrain.
Auto Part Position | Outer |
Item Dimensions LxWxH | 8.25 x 5 x 3 inches |
Brand | OxGord |
Color | Black |
Mounting Type | Windshield Mount |
Special Feature | Adjustable |
Size | Side View |
Shape | Rectangular |
Lens Curvature Description | Convex |
Manufacturer | OxGord |
Item Weight | 2.29 pounds |
Product Dimensions | 8.25 x 5 x 3 inches |
Item model number | UTV-RVMP-01 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | UTV-RVMP-01 |
Special Features | Adjustable |
H**D
I was skeptical at first ... but in the end am VERY PLEASED with this mirror!
This rear view mirror works much better than I expected it to. I should have bought it 5 years ago when I first got my UTV! As compared to a car's rear view mirror, you need to tilt your head up a bit more to use it, since it is mounted to the roll bar and not lower on the windshield. But since it is slightly convex, you get a wide view which is also plenty tall, to see what is going on behind you. It is especially helpful for backing up trailers or whatever (I use my UTV to launch my boat). I am actually surprised that UTVs do not come with a mirror like this.
D**X
A Great Value in UTV Side Mirrors
I purchased these side mirrors for my Kawasaki Mule-Pro FXR. I debated between purchasing these or purchasing the OEM Kawasaki side mirrors. Since these mirrors were approximately 1/4 of the cost, I decided to give them a try.I have not been disappointed. The mirrors came with accessories and adjustments that make for easy installation and a secure, tight fit. The mirrors stay in place and do not jiggle around. So far, they have proven to be very durable. They provide good visibility of objects to the side and rear of the UTV.These mirrors are a great value and I would not hesitate to buy them again.
B**.
Good mirror.
It flips up when I'm hauling my UTV on the trailer and I have to flip it back down. It comes with several different clamps to fit most pipe sizes or ROPS for UTV's and a rubber strip. You need the rubber strip inside the plastic clamp to hold the mirror down. It still flips up somewhere between 45 and 75 MPH. It stays put at 45 (max speed of my Honda Pioneer), but when I haul it on the trailer at 75 (legal speed limit), it's flipped up when I unload it. It's as hard to flip down as the sun visors in your car (in other words, no big deal). Good, wide view. It helps me back out of my barn without hitting anything. I would recommend it to anyone with a UTV.
C**Y
Review
Only had for a few days but seems to be a good product. Easy to install and gives a good clear view. If they hold up this will be a great product. I saw some reviews that said theirs was flimsy and didn't come with all the screws, etc. Mine came with everything needed for installation and I don't feel like these are at all flimsy. They fit perfectly on our 2017 Honda Pioneer 700. No vibration at all, but as I said, time will tell if they hold up. So far I am very satisfied and would definitely recommend for the price.
T**G
Looked good
I installed mine and test drove it. Worked well. Then my nephew proceeded to break it. I think it would have worked well for what it is.
E**L
Good Value -Watch the installation video
I bought one for a Kubota and 1 for a Yamaha Rhino on both I needed extra rubber shims to make the clamps fit. Easy enough if you have an old inner tube laying around (see ,see it pays to save stuff) but they could just include 2 more of the thin shims. For the barrel bolts , you will need two 5mm allen wrenches.... and i think the tilt screw was a 4mm... Its bad enough they didn't use Philips, but the same size on both ends. Mounting bolts on the UTVs have a different hex caps than the nut to make it require less tools.WATCH THEIR SHORT VIDEO a lot of people have trouble mounting these, apparently they don't have trouble getting them to tighten to the roll bars like I did.. This is the time to read the instructions or the watch the video they have in the column of pictures. ORBEFORE you mount them, you need to loosen the angle allen set screw quite a bit because it has 36 teeth not friction, then you can tilt the mirror 10 degrees at a time to set the coarse angle. This set screw is hidden from view after put the mirror in the clamps. You need to hold it in the clamped position and tighten it down when the mirror looks plumb. Mount the mirror in the clamps and then you have the fine tilt. You might have to try a different course angle depending on your roll bar, picking the best range. A little frustrating but, once you've won the fight , its over. The process can be a little fiddly.These are cheap enough to replace if you break them, but if you don't have the ball swivel screw set too tight they move out of the way when impacted. Mine have run through branches , trees, boulders, hit door ways , "adjusted" by curious cows and angry bulls and they just need to be readjusted.
R**.
We're still having fun and staying safe
My husband and I ride with 4 other couples(Mountain Riders on Facebook). When we aren't the last ones in line on the trail, I constantly turn around to make sure no one is having trouble or getting left behind, especially in difficult places. These mirrors allow me to see behind us without having to keep turning around to look. We have no complaints except that they are plastic and sometimes they get knocked out of position. We just push them back where we had them. Not a problem. We're still having fun and staying safe. Buy them! About $30 and 2 days time they'll be at your door. Oh! and they're super easy to put them on. I can do it and I'm a girl! lol
S**F
Not for angled roll bars, and the models they fit list is worthless
I checked the list to confirm this item would fit my 2014 Teryx let prior to purchase. I recieved the mirrors and was pleased with the quality and value. When I mounted them it was very clear that they could not be positioned in a way that made them functional. I moved them from the top of the roll bar to the bottom and every spot in between with the same results. I finally got desperate enough that I decided to modify them by removing some plastic on the back side so I could increase the tilt angle. This allowed for an acceptable angle but the range was too great for the bolt and spring to work. In other words I could hold it in perfect position by hand but there was no way it could remain stable mechanically. The bottom line is that these are good mirrors but they are not designed for roll bars with an angle. We tried them on my son's Wildcat side by side with the same results.My biggest frustration and the reason for one star, which I do not give lightly, is that in spite of all the discussion about the mirrors not fitting models they claim they will fit, there appears to be no effort on the part of the seller to correct the list.
F**N
que l'article est comme demander
bien emballé, bon service
J**E
buenos
buenos y bonitos espejos
O**E
Mal
No me sirvió para defender como me ofreció
A**R
Five Stars
works perfect !!!
H**C
excellent
excellent produit, bien emballé et de qualité
Trustpilot
1 week ago
2 months ago