Comgrow 3D Printer Warm Enclosure Fireproof and Dustproof 3D Printer Tent, PVC Laminated Polyester Constant Temperature Protective Cover Room for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 Pro

It was easy to put together, and it was a lot bigger than I expected! This has great access hole for all your cables (Power, USB, etc.) Plus, they have velcro vents on the bottom rear , left and right, so they are good to stay open or shut to keep bugs and unwanted things out, or can be used for needed ventilation. It has a rubbery outer skin, and feels like its nice and thick! It has a little pouch on the front lower right side to put things in, like a micrometer, or allen wrenches, and whatever, and has a nice big front opening that zips all the way up and back to give you plenty of space to work on it, and has a real nice, clear viewing area, so you have plenty of room for needed stuff like a camera, or other things inside the enclosure. Has about 12" front and back clearance when my Ender3 is centered in it! This would be perfect for virtually any printer! I saw my friends Ender 6, and it would fit in this thing. I absolutely love it, and might even get some more of these for other stuff! You could use this as a grow box for herbs, and whatnot, or if you think outside the box, you could even use this for a bird cage cover for a well ventilated area that you could safely close the front for noise reduction, and plenty of fresh air travelling through the area, and for quiet time at night. (For bird owners) and former bird owner! It could probably handle being a sand blasting booth with a bit of skin protection added inside, but could be a candidate anyway, or just a real good spray booth for a nice and fume controllable space with exhaust available openings, but as the best thing to keep your printer nice and clean, it rocks, and is made very well! I dont mean to sound like a company sales person, which I am not, but Comgrow are the best people to buy from, and have the most fanominal customer support system that I have had the pleasure to have found, and it started when I read a review just like mine here, and read that someone bought a printer, and needed help, and was really happy to have found them also, and told of their great tech service, and after the sale care, so with that said, I just want to give back as my only other way to show my appreciation for the much needed information that gets you on the right path when you just want to learn what to do when something goes wrong, and will stay with you by staying in touch to make sure you are good to go! Its your dream come true with these folks, and they stand behind their stuff! If I could, I would buy you all one, so you would be hooked up, but I am not quite there yet, LOL, but this one is really a good buy, and just had to tell ya all about it! Thanks and Happy printing folks!

Absolutely love this enclosure, can finally use those hard-to-print filaments. Also keeps dust and debris out so it doesnt end up in your print. Real flame retardant material, hence the reason for the semi-sticky silicone on the outside (which doesn't bother me at all, the stickiness fades over time.) Multiple velcro access doors if you need to run your cables a certain way or want to install an exhaust fan. This enclosure is slightly bigger than other small enclosures and because of that, fits my Ender 3 S1 perfectly with more than enough room for the top-mounted spool holder and a printed tool holder which attaches to that. It's almost like it was made for my printer. Since I'm running a Klipper tablet on the outside of the enclosure, I removed the original screen which gives you a couple extra inches as well. I also installed a small metal eyelet grommet on the side to be able to run filament from my Sunlu S2 dryer directly into the enclosure and it works great while still keeping the warm air in. Overall very happy with this product and would purchase this exact one again if i ever needed another. Comgrow is an excellent company with great customer service, I actually purchased the printer from their website and have nothing but positive things to say about the entire experience. The same is true with this enclosure. A+++

This is a nice addition to my FDM printer. Quiets the noise some. Keeps heat in for more stable printing. Helps reduce mess by keeping it all within. Plenty of openings for cables. Pouches for the commonly used larger tools. Fire protection should it ever be needed, hopefully not. All for a very reasonable price.

The things it does good are - keep the air temp around the print more consistent, slow the moisture uptake on exposed rolls on the printer, look nice, and keep smells in, and pet hair out.You should take care assembling. The black rubbery coating on the outside of the shell is not very durable. Putting it over the frame on an unswept floor was enough to put small holes in it, that allow the light of my printer to seep out. Not really a huge deal, but definitely not desirable.

It was easy to assemble and works as intended. It would have been better if there was a top opening. Some filaments can benefit from it. For example, PETG prints better with all sides protected from draft but with top open to help keep chamber temperature in check.

It works great. One of the two zippers it comes with broke immediately so I guess it’s a good thing it has two.Otherwise it keeps heat in well, am happy with this purchase overall.

The O ly thing I might have liked was a top cutout to feed filament I. From an above mounted filament dryer. Other than that, I've had no issues with this, and it's easy to assemble and disassemble.

This does the job. It's a bit pricey for what it is, but they all are.It could have been engineered with less varied tube sizes, buts opts for four different sizes, so pay attention to the directions (it's not hard). The corner joiners are plastic, so don't let anything stress them or you'll be... printing a replacement piece, I guess.It is an absolute dust magnet. That's fine, I wanted it to keep dust and drafts out, it doesn't have to look pretty while doing it.The important thing is that it fits the Prusa MK3S+ with room to spare. Now I guess I need to buy some LEDs.

hace su funcion, y me sirvio tambien para colgarle un rollo de filamento en lo alto (con una adaptacion impresa claro) para mi impreso pequenita (kingroon kp3s).

The media could not be loaded.  Et oui, facile à installer, solide, c'était parfait sauf que la surface extérieur est en un genre de caoutchouc qui est super gommeux et qui colle tout, poussières, poils de chat, etc... Et impossible à décoller, alors surtout, au montage, il ne faut pas comme moi, laisser l'extérieur de la toile toucher la couette de lit lol... Ça peut pas s'enlever une fois collé ou alors dites moi avec quel produit ??

Definitivamente, un accesorio necesario para impresión 3D, me ha permitido resguardar mi impresora y tener mejores impresiones (además de que me permite tener la ventana abierta y conservar mejor el calor de la impresión). El material es un poco extraño, porque el polvo se pega muy fácil, pero es un espacio muy grande.

Muy recomendable

El producto viene completo, hasta ahora cumple con la descripción, espero que me ayude a seguir adelante con mis proyectos... Le doy 5 estrellas por agradecimiento a los proveedores confiables que nos ayudan con buenos productos relación precio/calidad y sobre todo el envío... La eficiencia de la carpa ya es arena de otro costal, apenas iniciarán las pruebas. Agregó las medidas en fotografías para quien esté interesado.