CVT Torque Converter 30 Series Mini Bike 2HP-7HP Go Kart Clutch 1 inch 10T #40#41#420 & 12T #35 Chain, Drive Pulley, Replace for Manco Comet 218354A 203603A 219456A 218355A TAV2, with 3 Belts

I installed these on a pair of Coleman CT200U-EX mini bikes, which use a Hisun 196cc (Honda clone) motor. These are a nice upgrade from the clutch/chain/jack-shaft setup that comes on the Coleman's, and really improves the overall performance for stock-ish motors. For most Coleman's, you will also need a riser plate to move the motor up and forward to clear the cross brace. Another option is to cut the cross brace out, but I chose to go with a $20 riser to solve this problem. If you raise the motor, you may also need to clearance the chain guard a bit, as the chain is very close to the front of the guard and will rattle against it at idle.The kit comes with a 12 and 10 tooth sprocket, I ran the 10T and they performed well on a mostly stock motor. The cover that comes with the kit does not have a cut-out for the chain, but this is so you can trim the cutout to fit your need and application. I can't speak to the longevity of the belt yet, but I've ridden the bike several hours without any issues so far.The only negative comment I had was that some of the hardware was sub-par - there was actually a bolt or two that was improperly formed and didn't have a hex on the head. Minor complaint, and I had other hardware on hand.I also tested the fit of these on another mini-bike that uses a more traditional direct chain drive without a jackshaft. This one was using a Predator 212 motor, and the CVT did bolt up well. However, there wasn't room in the frame for the CVT, and the frame wouldn't accommodate a riser setup due to its small size. So be aware that you may need to get creative with a riser, fuel tank, or other changes to make this fit your mini.

Great fitment on a predator 212cc

Great item

Have had it on my mini bike for almost a year with no problems. Easy to install too

Perfecto para lo que necesito

I've purchased so many years of these in lost count. One thing to know is they're all the same regardless of price. This particular one, with professional experienced installation lasted for about 2 days worth of test drives. I decided to do a kart top speed test at 40mph and the outer bearing blew apart like popcorn kernels popping! Caused chain to bind at 40mph. Had no choice but to replace the bearing. It wasn't worth the effort to disassemble and return.

Thumbs up

The media could not be loaded. It works and was super easy to install.