Hooke Road F150 Rear Back Bumper w/Lights & Towing Hooks for Ford F-150 2006 2007 2008 2009 2010 2011 2012 2013 2014 Pickup Truck (Textured Black Steel)

Looks great on my truck

Install was good and it looks good but I'm getting g complaints from people behind me at night that the lights are way too bright, are their filters or something to put on them?

****BUMPER OVERALL REVIEW ****I had been looking for a new bumper for 2 years. Looking for price, value, quality, good warranty, good reviews and an aggressive and modern look for my 2007 Ford F150 Lariet. I decided on Hooke Road products biased on the above requirements.******PACKAGE ARRIVED MANGLED BUT NO IMMEDIATE DAMAGE WAS SEEN TO CONTENTS *******However, AFTER INSTALLATION lots of finish damage to several components!! This is reason for four star rating.I was to say the least un happy with the damages. Especially since I spent all day installing it! I have contacted seller to see what if anything can be done to appease me. Ie: partial refund or touch up paint. I will update review after sellers has contacted me regarding this issue.******DAMAGE UPDATE FROM SELLER******I contacted the seller with two options for the damage. I definitely didn’t want to remove and return the bumper, I asked for:•15% discount• paint or painting instructions for repairs••Within 24 hours, the seller• reached out• Provided the paint repair information• Provided the 15% Discount Refund• They STAND Behind their products• FANTASTIC CUSTOMER SERVICE• THIS COMPANY IS THE FULL PACKAGE:1] QUALITY PRODUCTS2] QUALITY CUSTOMER SERVICE****New Buyers warning:****to avoid damage finding issues:CHECK ALL BUMPER COMPONENTSBEFORE INSTALLING!!!********* INSTALLATION **********>>Direct fitment depends solely on what type of receiver hitch set up you have!!•• I didn’t think the new bracket were made for my truck until I realized my receiver mount brackets were reason for the brackets not fitting correctly.•• I measured my hitch brackets and realized if I cut off the outside bumper mounts for the old bumper, LEAVING ONLY THE INSIDE MOUNTS, the Hooke ROAD brackets would fit perfectly. DONT BE AFRAID TO CUT YOUR RECEIVER BRACKET IF ITS NECESSARY . That part of the bracket is only used for mounting an OEM bumper and isn’t needed for mounting The HOOKE ROAD bumper. You will use the new brackets for the bumper.NOTE: PLACE NEW BRACKETS BEHIND YOUR RECEIVER MOUNT THEN BOLT EVERYTHING TO THE TRUCK USING OEM 3 BOLT BRACKETS.***See photos for how this was done***•• Once the Mounting Bracket issue was solved things went much smoother.****HOW LONG DOES IT TAKEFROM START TO FINISH?***I took 2 days so I wouldn’t be rushed.*One day to remove OEM COMPONENTS*One day to Assemble & Install•• DIRECTIONS SAY 1-2 hr installation—I strongly disagree. Here’s the timeline:A- 45 minutes to remove ORM bumper and disconnect preexisting wire harnesses .KEEP ALL YOUR LIGHT HOUSINGS, MOUNTING NUTS & the Bar Bracket with 3 bolts. THESE WILL BE NEEDED TO ATTACH BUMPER BRACKETS!!!B- Installation of bumper brackets * Time will vary from 30 minutes to 1 1/2 hour depending on :1) Difficulty in removing Nuts2) May require Modifications to yourreceiver hitch mountsC- Assembly will take approximately 30 min.Following their instruction sheet.PLEASE NOTE DURING ASSEMBLY PROCESS>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<I strongly recommend using RED LocTite to secure all of the nuts and bolts! This will add about 5 extra minutes to assembly time.** NOTE: The Bumper is comprised of 3 separate components and held together with just 8 bolts. ~Over time and and use :**ALL BOLTS WILL EVENTUALLY LOOSEN****Manufacture did not suggest this step.Let me reassure you, this step will save you a tremendous headache down the road.RED LOCTITE WILLKEEP YOUR BUMPER IN ONE PIECE FOR LIFE!***********INSTALLATION PROCESS***********>>>>> I urge you to use RED LOCTITE <<<<<for the follow process.>>>MOUNTING BRACKET POSITION<<<HOPEFULLY DURING INSTALLATION OF THE BRACKETS, THE NUTS ARE ALL IN THE SAME POSITION ON BOTH SIDES !! If not your bumper will not be level. CHECK THIS BEFORE YOU INSTALL THE BUMPER TO THE BRACKETS.HOW? I made sure the brackets were in the lowest position on the bolts to ensure both side were in same position. The lowest slot position will ensure you have no issues with tailgate open and closing.• The assembled bumper will sit perfectly ontop of the newly installed brackets. This makes it easy to insert the bolts. This step is much easier with two people and will take approximately 20 - 30 minutes if you use LOCTITE & have no leveling issues.• I recommend LOOSLY installing :1- ALL nuts, washers and bolts on both sides BEFORE FINAL TIGHTENING2- once all hardware is in place, you will now make your final adjustments. Ie: centering the bumper.3- Once you have bumper centered tighten the center bolt to ensure it stays in position.4– Now go to opposite side and tighten down the center bolt. At this point recheck your alignment and center. If everything is as you want, Tighten down all the nuts and bolts **USING LOCTITE on all your bolts!!!**Once Installation is completeNOW you install the LED lights : you can either connect to your reverse lights or run a switch to them. This is strictly a user preference.** This process will take 30 minutes to an hour depending on how you wire your LED LIGHTS And your experience**Side note. You can use your OEM license plate lights in this bumper. There are also four extra pre made holes for more of these types of light housings. I purchased some red LED License plate bulbs from Amazon so all the lights would match and it worked perfectly.I think I’ve covered everything. Please ask a question if I missed something I’ll be happy to respond. Happy Shopping!

Everything was great. Now I want one for the front too. You'll probably want deep metric sockets for the install.

Easy to install. Looks great.

Tried this on a F150 08 model and it fits. The company is seeing me sensor plugs. I didn't have the 8pin trailer hook up so I going to have to rig something for this hole.

Hole to get spare tire down is not there.Also corner rub against truck no space. Which means one hit it smashing right into sides. Also no wiring given .Don’t buy spend the extra 100 and get rough country

nice product