MontechAIR 100 ARGB, Micro-ATX, Tempered Glass - schwarz

Really nice case to build in, used this for my first and only ever PC build and was really simple with instructions and accessories. Fans are DC not PWM, but haven't noticed much noise from them or any sharp changes in fan noise either. I'm a big fan of the fan colour presets, no need to use the ARGB 5 pin. No complaints at all, great airflow and at a good price too.

I built my last computer 8 years ago and when it packed in I decided to salvage some parts (SSD and video card) and make a new budget build.My previous build was an ATX tower so going down to a Micro was a welcome change as it's about 30% smaller.I didn't really consult the documentation and went ahead with my build blind, so to speak. Overall I was immediately impressed with the quality of the case. It feels and looks high quality. The left side door is tempered class and swings out. If you lift up it comes off its hinge for easy removal (I actually didn't realise this and almost dropped it on the floor. Probably should have read the documentation). On the other side there's a removal panel which is secured by two screws with coverings on them so you can hand tighten them.The power supply has its own shroud, along with space for an old spinning hard drive (I repurposed my old 4tb WD drive) and enough room to tuck the wires. The fans and LEDs already come pre-rputed nice and neat with velcro ties going into a controller.As I worked on the build, I kept finding small attention to detail bits that made me impressed. For example, inside the main cavity there's an engraved Micro ITX & Mini ATX marking with a legend showing you where to put the separators for your motherboard.I'm not a fan of RGB so didn't buy an rbg motherboard, so the lights default to rainbow-ish without a controller. My kids loved it.There's plenty of access places to run cables combined with the shroud cavity means the build looks much neater than my previoys build. Speaking of my previous build the case was supposedly a "quiet" case with roam insulation etc. I've actually found this mesh case much, much quieter. I suppose this is because the airflow is better, the fans can run at a lower RPM and therefore are much quieter.My one slight complaint is that the cable for the fan controller, which you plug into the motherboard to control the fans, is very short nthe first time I powered on I actually missed it and as a result had stationary fans. I thought I may need to buy an extender cable, but I was able to undo the velcro tie which gave me enough length to then reach the proper slot on the motherboard so it was fine in the end.Overall I highly recommend this case if you're looking for a quality case at a good price.

A great looking case, but with a few design niggles. Firstly, is it really necessary to have a cut out to see the PSU on the side? Second, the back two cabling slots at the bottom (between the main body and the PSU box) are unusable when the PSU is in. If my PSU were bigger, all three would be unusable and routing cables around would be troublesome. Thirdly, the top magnetic dust mesh could have been designed to match exactly the case's cut out design. As it is now, the combination of one on top of the other actually restricts probably more than 3/4 of the possible area. Otherwise, a good case for the money. Having the swappable front panel is a nice little bonus.

Right of the bat this case impressed me by its looks. The 4 ARGB Fans look amazing and the design of the case is sleek and well built. The airflow appears to be very good, especially for this price point of about £50. The dust filters for the front panel, top and bottom of the case are easily removable (all magnetic) and the case has ample room to manage cables etc. My one and only gripe with this case is the 3 pin fan header cable is slightly too short and so to plug it in you need to bring some of the daisy chained fan cables down into view. Other than that, the case is fantastic and will definitely be buying this again!

High quality materials, easy to build in, comes with 4 argb fans and a 3 pin hub with spare connectors for additional lighting. I really liked the easy to remove front dust filter and the two interchangeable front panels both look great. It has white rubber grommets for all the feed throughs, so wires stay nicely concealed.A couple of minor negatives are no front USB C, and the syncing the case lights with the motherboard is not clearly explained.Overall a premium look and feel, with good airflow.

Bought for £85. First time building a pc. This case (built weeks ago) is excellent quality, solid and light, beautiful glass, has correct locations for all screws/fixes, has three pre-installed front fans and a rear fan. Has two choices of easily-switched front faces. Colours are beautiful, and it's so light and pleasing to the eye! It's also got a power supply window (many cases don't!) so you can admire your PSU too. I underestimated how important both a case and a motherboard are to a computer build, and fortunately I picked well. The case is truly an excellent buy and I wouldn't pick any others!

Could do with more detailed instructions when setting up internal Fan LED’s. Plug the SATA into one of the power unit which supplies the SATA connecting cable. Fan LED selection by clicking through the case LED Button. No software option that I can see that gives you customisable options on colours. Box itself is seems adequate enough. Can’t get excited over a Black Box.

This is absolutely an amazing case. It looks gorgeous, it’s spacious and the build quality is great for the price range. The pre-installed fans are very good and they provide a nice RGB light show. Airflow and cable management are very very good in this case, would recommend !!!