Chip Quik NC191LT15 Smooth Flow Low Temp Solder Paste Sn42/Bi57.6/Ag0.4 T4 15g Syringe

ok merci

I'm using this solder paste for SMD work, applying it manually.The provided nozzles and the syringe itself make it pretty much impossible to apply exactly as much paste as needed. But the paste itself works well once the right amount of it is applied and heated to the right temperature.I use a toothpick to correct the amount of paste on each pad and distribute it the way I want, and a flashlight (shining it from a side) to estimate exactly how much solder paste is applied (taking into account that 85% or so of the volume will remain as metal).Successfully assembled a few SMD devices with parts of all sizes, including very small parts, using this paste.A set of nozzles of different sizes probably could help, but so far my toothpick method works for me.I stored this paste for more than a year not in a fridge, it still works fine.

Second time using a low temperature melt solder and it helped me complete my daughter's Slime VR Trackers. The boards are really tiny and the niidle helped me place a small dab on the solder pads and the tip of the stripped back wires i used. Instead of being worriedabout damaging any boards with the heat. It was barely a quick tap to the ball of solder and it was all done

wets out nicely but does make alot of smoke. Does work good though melts right away and sticks easily.

Flows well, a little difficult to control small amounts. Melts at a good temperature.