Binardat 4 Port Gigabit PoE Extender, 1 PoE in 3 PoE Out, IEEE802.3af/at PoE Powered Passthrough Switch, 10/100/1000Mbps Ethernet, DIN Rail & Wall Mount

Works very well. I used it to power a couple of remote CCTV cameras, meaning that I only had to run a single cable out. Still a couple of ports left and sufficient power capacity on the PoE to add another, or an access point, etc.

Needed to run two cctv IP PoE cameras via the single existing cable, works fine and I have a spare remote port as a bonus.Picture taken during testing before installation.

This is a magic piece of kit, so useful. I have placed with just 1 cat6 cable pulled in where I had a POE camera and wanted to also add a POE WiFi access point. This works brilliantly for that. I don’t need to maximise performance and so running both devices over the one cable is no problem. It passes on the POE just fine to both devices. Had it running got several weeks now and no problems

☑️ As described and as advertised.☑️ Basic but adequately packaged and presented with set up diagrams printed on the box.☑️ Please note that this is an extender and will not innovate self provide POE, as it does not have its own power source capability.☑️ We like that, this is both wall mountable and can be attached to racks. So for home, use his most like to be the wall mountable option.☑️ This is a nice piece of kit that will allow power over ethernet cabling for three devices, and we are thinking most likely external CCTV cameras.☑️ Well, made with no visible defects, no issues.☑️ Good through, but in a good way to connect from your main hub or switch through to external cameras without having to wire, the entire length width of your house et cetera

tidy bit of kit, does the job and no lag / packet loss with max devices connected

I bought this specifically because it said it would support 10mbps.It is even written on the sticker on the back, however it did not work with my MorningStar charge controller (which is what I bought it for), so I am sending it back.I will just buy one of the expensive ones that I've bought before and work fine.

I'm a professional CCTV installer and I'm running these 3-way POE splitters with 3x Uniview IP cameras, they work very well, just plug and play, so good for expanding CCTV systems where no extra ethernet or mains for a POE switch available.I highly recommend them, will be buying more.

Often the hardest part of extending a network is working out where to plug things in. These neat little boxes solve a couple of issues with regards to additional connections and lack of mains supply. Best used with something like a CCTV setup that uses PoE cameras etc but have their use too just by being powered themselves via PoE. Replaced a single connection with this to have additional devices and no need for a powered switch since I had no plug nearby so pleased with the results.