23pcs FWD Front Wheel Drive Bearing Removal Tool, Wheel Bearing Press Kit Bearing Adapters Bearing Installer Tool

Great tool for the price. Wish I would have had this years ago. Actually works as it should, made wheel bearings easy to remove and install on the car. Highly recommend.

Used it today to do front wheel bearings on my 2012 Ford Fusion. Worked perfectly and saved a ton of time and frustration Have used OTC Hub Tamer before($600 kit) a d this kit worked as good if not better to press the bearing out and new one back in Used a slide hammer to remove the hub first, removed clip and installed the right adapters. Used a 1/2 ratchet first to break it loose and once loose was able to use my electric impact to drive it out Install was simple and fast Adapter are very straightforward and easy to match up what you meed Looking forward to using this in the future

I have use this product five times now, very good quality. 👍

I used these plates both for hitting out my old wheel bearing and installing the new one. They took a lot of hits with a hammer with minimal damage. Initially the threads were a bit weak, but after applying a lot of grease and threading it a few times it cleared it up. The box also came damaged, but the plates were all in good condition.Overall a very effect product for your DIY bearing removal, and greasing it well can allow it to be used many times more

I used this kit to remove and replace the front wheel bearing on my 2004 Mazda 6 with no problem. It had all the correct sizes to press the old bearing out, press the new bearing in (by outer race) and press the hub on (by inner race).Make sure to lubricate the threads and washers with grease. Do not use an impact wrench.The kit arrived damaged but it does not appear to affect storage. The kit is heavy so hopefully it didn't land on some poor delivery persons foot with the unexpected weight.

Very heavy and clearly banged up on the edges. All disk we dislodged and had to reorganized once opened up. Bolt is 3/4”-10 NOT 3/4”-16. Checked with a thread tool. More to follow.

I liked how many options were available for use. It was easy to assemble. The screw head is 30mm socket. I had to go out and buy one. The bad part is the bad craftsmanship of the screw. It somehow stripped on itself. The shaft went on the backside of the plate easily. Then during cranking it down to remove the bearing, turning became difficult. I backed off and then continued. Again, more difficult. I had to use a large pipe to get force to get the bearing out. When I finally got the bearing removed, it took another 10 minutes to get the screw out of the shaft because the threads were worn. Only one side half completed and this product is now useless. You are supporting to be able to use this product to press the bearing and hub back in. Not now. One and done product. Now my car is down and I have to go buy one locally to get the job done for both sides. I do NOT recommend this productUpdate: I went to HD and bought a similar sized bolt and the matching nut. Came home and got the job done and the boot from HD did not strip out.

Aloha, Let me start by stating that I almost never write a review for anything. I think that this might be the 4th, or 5th review that I have ever written. This item deserves a few words. I assumed that this kit was nothing more than a cheaply made bunch of junk that would most likely break upon the first use, but worth the cost if I could just get the job that I needed it for done. Well...what can I say, other than I guess that I'll never learn to stop assuming the worst about things that I've never seen. This kit is very well made, and I suspect that it will be working well for many many years. The assortment of tools that are included in this kit should make the changing of pressed in front wheel bearings a breeze on any vehicle. The description of the product and what's included really do not do it justice.The description, and the pictures of the kit in the ad had me very concerned that the tools that I needed were not included in this kit, and to me, it looked like a toy. Well... in this case a picture is not worth a thousand words. I'd say that the vehicle that I was needing the tool for probably has one of the larger pressed bearings that are used on today's vehicles, and the tools that are included in this kit handled the job with ease. One of the reasons that I decided on this kit was the ability for use of an impact gun, which some other kits in this price range say you can not use. How well does it work ? Well... I spent less than an hour changing the front wheel bearing on a 2000 Nissan Quest. There was no need for removing the bearing/steering knuckle from the vehicle, which saved the need of a front end alignment after the job was done. Yes, I changed the bearing right on the vehicle. What did I save? Well, lets see, the machine shop quoted 100 bucks just for removing and installing the bearing, there was no need of a front end alignment which saved another 100 bucks, and, there was no time, or fuel used taking the part to the machine shop, or the need for returning to the shop to pick up the finished part the next day. Also, there was no need for spending an additional hour or so removing and reinstalling the bearing/ knuckle., Bottom line... If you need a good quality bearing replacement kit for not a lot of money, I highly recommend this kit. But watch it, there are many kits that look like this kit for about the same cost, but those kits may not be this same quality. Then again, some kits could be better quality, but I doubt that a kit could be better in quality at this price level. Just make sure that the description says that an impact gun can be used, and if so, the kit should be OK. Aloha.

replaced toyota corolla front wheel bearings using this tool, worked very well

bien sûr, il n'y a pas de notice, mais en prenant le temps de comprendre, c'est redoutablement efficace et pratique. je l'ai essayé sur un moyeu de remorque de bateau( roulements étanches) et ça s'est très bien passé, tant au démontage , qu'au remontage. ( prévoir des cliquets/clefs costauds)

Used to replace Citroen C1 front wheel bearing.Worked perfectly with no issues.

Bolzen zu groß! Die anderen Teile passt genau, muß kleine Bolzen Xtra kaufen dann wird schon funktionieren

Good quality and well priced